[v2,6/7] pinctrl: Add RTL8231 pin control and GPIO support

Message ID 041077d195f1cc81bf6363388cb4adfb06cff4ef.1621279162.git.sander@svanheule.net
State New
Headers show
Series
  • Untitled series #128099
Related show

Commit Message

Sander Vanheule May 17, 2021, 7:28 p.m.
This driver implements the GPIO and pin muxing features provided by the
RTL8231. The device should be instantiated as an MFD child, where the
parent device has already configured the regmap used for register
access.

Although described in the bindings, pin debouncing and drive strength
selection are currently not implemented. Debouncing is only available
for the six highest GPIOs, and must be emulated when other pins are used
for (button) inputs anyway.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
 drivers/pinctrl/Kconfig           |  11 +
 drivers/pinctrl/Makefile          |   1 +
 drivers/pinctrl/pinctrl-rtl8231.c | 377 ++++++++++++++++++++++++++++++
 3 files changed, 389 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-rtl8231.c

Comments

Andy Shevchenko May 17, 2021, 9:42 p.m. | #1
On Mon, May 17, 2021 at 10:28 PM Sander Vanheule <sander@svanheule.net> wrote:
>
> This driver implements the GPIO and pin muxing features provided by the
> RTL8231. The device should be instantiated as an MFD child, where the
> parent device has already configured the regmap used for register
> access.
>
> Although described in the bindings, pin debouncing and drive strength
> selection are currently not implemented. Debouncing is only available
> for the six highest GPIOs, and must be emulated when other pins are used
> for (button) inputs anyway.

...

> +struct rtl8231_pin_desc {
> +       unsigned int number;
> +       const char *name;
> +       enum rtl8231_pin_function functions;
> +       u8 reg;
> +       u8 offset;
> +       u8 gpio_function_value;
> +};

I would see rather

sturct pinctrl_pin_desc desc;

Where drv_data describes the rest of the data for pin

...

> +static int rtl8231_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
> +       const unsigned int **pins, unsigned int *num_pins)
> +{

> +       if (selector < ARRAY_SIZE(rtl8231_pins)) {

Can we use traditional pattern, i.e.

  if (... >= ARRAY_SIZE(...))
    return -EINVAL;

  ...
  return 0;

?

> +               *pins = &rtl8231_pins[selector].number;
> +               *num_pins = 1;
> +               return 0;
> +       }
> +
> +       return -EINVAL;
> +}

...

> +static int rtl8231_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
> +       unsigned int group_selector)
> +{

> +       int err = 0;

Redundant variable.

> +       switch (func_flag) {
> +       case RTL8231_PIN_FUNCTION_LED:
> +       case RTL8231_PIN_FUNCTION_PWM:
> +               err = regmap_update_bits(ctrl->map, desc->reg, function_mask, ~gpio_function);
> +               break;
> +       case RTL8231_PIN_FUNCTION_GPIO:
> +               err = regmap_update_bits(ctrl->map, desc->reg, function_mask, gpio_function);
> +               break;
> +       default:
> +               return -EINVAL;
> +       }
> +
> +       return err;
> +}

...

> +static const struct pinmux_ops rtl8231_pinmux_ops = {
> +       .set_mux = rtl8231_set_mux,
> +       .get_functions_count = rtl8231_get_functions_count,
> +       .get_function_name = rtl8231_get_function_name,
> +       .get_function_groups = rtl8231_get_function_groups,
> +       .gpio_request_enable = rtl8231_gpio_request_enable,

> +       .strict = true

Leave comma for non-terminator entries.

> +};
> +
> +

One blank line is enough.

...

> +static int rtl8231_pinctrl_init_functions(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
> +{
> +       struct rtl8231_function *function;
> +       const char **group_name;
> +       unsigned int f_idx;
> +       unsigned int pin;
> +
> +       ctrl->nfunctions = ARRAY_SIZE(rtl8231_pin_function_names);
> +       ctrl->functions = devm_kcalloc(dev, ctrl->nfunctions, sizeof(*ctrl->functions), GFP_KERNEL);
> +       if (IS_ERR(ctrl->functions)) {

Wrong.


> +               dev_err(dev, "failed to allocate pin function descriptors\n");

Noisy message, user space will print the similar.

> +               return PTR_ERR(ctrl->functions);
> +       }
> +
> +       for (f_idx = 0; f_idx < ctrl->nfunctions; f_idx++) {
> +               function = &ctrl->functions[f_idx];
> +               function->name = rtl8231_pin_function_names[f_idx];
> +
> +               for (pin = 0; pin < ctrl->pctl_desc.npins; pin++)
> +                       if (rtl8231_pins[pin].functions & BIT(f_idx))
> +                               function->ngroups++;
> +
> +               function->groups = devm_kcalloc(dev, function->ngroups,
> +                       sizeof(*function->groups), GFP_KERNEL);

> +               if (IS_ERR(function->groups)) {
> +                       dev_err(dev, "failed to allocate pin function group names\n");
> +                       return PTR_ERR(function->groups);
> +               }

Ditto.

> +               group_name = function->groups;
> +               for (pin = 0; pin < ctrl->pctl_desc.npins; pin++)
> +                       if (rtl8231_pins[pin].functions & BIT(f_idx))
> +                               *group_name++ = rtl8231_pins[pin].name;
> +       }
> +
> +       return 0;
> +}
> +
> +static int rtl8231_pinctrl_init(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
> +{
> +       struct pinctrl_dev *pctl;
> +       struct pinctrl_pin_desc *pins;
> +       unsigned int pin;

> +       int err = 0;

Check entire series for unnecessary assignments.They

> +
> +       ctrl->pctl_desc.name = "rtl8231-pinctrl",
> +       ctrl->pctl_desc.owner = THIS_MODULE,
> +       ctrl->pctl_desc.pctlops = &rtl8231_pinctrl_ops,
> +       ctrl->pctl_desc.pmxops = &rtl8231_pinmux_ops,
> +
> +       ctrl->pctl_desc.npins = ARRAY_SIZE(rtl8231_pins);
> +       pins = devm_kcalloc(dev, ctrl->pctl_desc.npins, sizeof(*pins), GFP_KERNEL);
> +       if (IS_ERR(pins)) {
> +               dev_err(dev, "failed to allocate pin descriptors\n");
> +               return PTR_ERR(pins);
> +       }

Ditto.

> +       ctrl->pctl_desc.pins = pins;
> +
> +       for (pin = 0; pin < ctrl->pctl_desc.npins; pin++) {
> +               pins[pin].number = rtl8231_pins[pin].number;
> +               pins[pin].name = rtl8231_pins[pin].name;
> +       }
> +
> +       err = rtl8231_pinctrl_init_functions(dev, ctrl);
> +       if (err)
> +               return err;
> +
> +       err = devm_pinctrl_register_and_init(dev->parent, &ctrl->pctl_desc, ctrl, &pctl);
> +       if (err) {
> +               dev_err(dev, "failed to register pin controller\n");
> +               return err;
> +       }
> +
> +       err = pinctrl_enable(pctl);
> +       if (err)
> +               dev_err(dev, "failed to enable pin controller\n");
> +
> +       return err;
> +}
> +
> +/*
> + * GPIO controller functionality
> + */
> +static int rtl8231_gpio_reg_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
> +       unsigned int offset, unsigned int *reg, unsigned int *mask)
> +{
> +       unsigned int pin_mask = BIT(offset % RTL8231_BITS_VAL);
> +
> +       if (base == RTL8231_REG_GPIO_DATA0 || offset < 32) {
> +               *reg = base + offset / RTL8231_BITS_VAL;
> +               *mask = pin_mask;
> +       } else if (base == RTL8231_REG_GPIO_DIR0) {
> +               *reg = RTL8231_REG_PIN_HI_CFG;
> +               *mask = FIELD_PREP(RTL8231_PIN_HI_CFG_DIR_MASK, pin_mask);
> +       } else {
> +               return -EINVAL;
> +       }
> +
> +       return 0;
> +}
> +
> +static int rtl8231_pinctrl_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct rtl8231_pin_ctrl *ctrl;
> +       struct gpio_regmap_config gpio_cfg = {};
> +       struct gpio_regmap *gr;
> +       int err;
> +
> +       ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
> +       if (!ctrl)
> +               return -ENOMEM;
> +
> +       ctrl->map = dev_get_regmap(dev->parent, NULL);
> +       if (IS_ERR_OR_NULL(ctrl->map)) {
> +               dev_err(dev, "failed to retrieve regmap\n");
> +               if (!ctrl->map)
> +                       return -ENODEV;
> +               else
> +                       return PTR_ERR(ctrl->map);
> +       }
> +
> +       err = rtl8231_pinctrl_init(dev, ctrl);
> +       if (err)
> +               return err;
> +
> +       gpio_cfg.regmap = ctrl->map;
> +       gpio_cfg.parent = dev->parent;
> +       gpio_cfg.ngpio = RTL8231_NUM_GPIOS;
> +       gpio_cfg.ngpio_per_reg = RTL8231_BITS_VAL;
> +
> +       gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> +       gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> +       gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);
> +       gpio_cfg.no_set_on_input = true;
> +
> +       gpio_cfg.reg_mask_xlate = rtl8231_gpio_reg_mask_xlate;
> +
> +       gr = devm_gpio_regmap_register(dev, &gpio_cfg);
> +       if (IS_ERR(gr)) {
> +               dev_err(dev, "failed to register gpio controller\n");
> +               return PTR_ERR(gr);
> +       }
> +
> +       return 0;
> +}
> +
> +static struct platform_driver rtl8231_pinctrl_driver = {
> +       .driver = {
> +               .name = "rtl8231-pinctrl",
> +       },
> +       .probe = rtl8231_pinctrl_probe,
> +};
> +module_platform_driver(rtl8231_pinctrl_driver);
> +
> +MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
> +MODULE_DESCRIPTION("Realtek RTL8231 pin control and GPIO support");
> +MODULE_LICENSE("GPL v2");
> --
> 2.31.1
>

Patch

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index c2c7e7963ed0..462df82c5133 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -221,6 +221,17 @@  config PINCTRL_ROCKCHIP
 	help
           This support pinctrl and gpio driver for Rockchip SoCs.
 
+config PINCTRL_RTL8231
+	tristate "Realtek RTL8231 GPIO expander's pin controller"
+	depends on MFD_RTL8231
+	default MFD_RTL8231
+	select GENERIC_PINCONF
+	select GPIO_REGMAP
+	select PINMUX
+	help
+	  Support for RTL8231 expander's GPIOs and pin controller.
+	  When built as a module, the module will be called rtl8231_pinctrl.
+
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 5ef5334a797f..239603efb317 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -30,6 +30,7 @@  obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
 obj-$(CONFIG_PINCTRL_PIC32)	+= pinctrl-pic32.o
 obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
 obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
+obj-$(CONFIG_PINCTRL_RTL8231)	+= pinctrl-rtl8231.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
diff --git a/drivers/pinctrl/pinctrl-rtl8231.c b/drivers/pinctrl/pinctrl-rtl8231.c
new file mode 100644
index 000000000000..44f08ba39f14
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rtl8231.c
@@ -0,0 +1,377 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/regmap.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/rtl8231.h>
+
+#define RTL8231_NUM_GPIOS	37
+
+struct rtl8231_function {
+	const char *name;
+	unsigned int ngroups;
+	const char **groups;
+};
+
+struct rtl8231_pin_ctrl {
+	struct pinctrl_desc pctl_desc;
+	unsigned int nfunctions;
+	struct rtl8231_function *functions;
+	struct regmap *map;
+};
+
+/*
+ * Pin controller functionality
+ */
+static const char * const rtl8231_pin_function_names[] = {
+	"gpio",
+	"led",
+	"pwm",
+};
+
+enum rtl8231_pin_function {
+	RTL8231_PIN_FUNCTION_GPIO = BIT(0),
+	RTL8231_PIN_FUNCTION_LED = BIT(1),
+	RTL8231_PIN_FUNCTION_PWM = BIT(2),
+};
+
+struct rtl8231_pin_desc {
+	unsigned int number;
+	const char *name;
+	enum rtl8231_pin_function functions;
+	u8 reg;
+	u8 offset;
+	u8 gpio_function_value;
+};
+
+#define RTL8231_PIN(_num, _func, _reg, _fld, _val)		\
+	{							\
+		.number = _num,					\
+		.name = "gpio" #_num,				\
+		.functions = RTL8231_PIN_FUNCTION_GPIO | _func,	\
+		.reg = _reg,					\
+		.offset = _fld,					\
+		.gpio_function_value = _val,			\
+	}
+#define RTL8231_GPIO_PIN(_num)					\
+	RTL8231_PIN(_num, 0, 0, 0, 0)
+#define RTL8231_LED_PIN(_num, _reg, _fld)			\
+	RTL8231_PIN(_num, RTL8231_PIN_FUNCTION_LED, _reg, _fld, RTL8231_PIN_MODE_GPIO)
+#define RTL8231_PWM_PIN(_num, _reg, _fld)			\
+	RTL8231_PIN(_num, RTL8231_PIN_FUNCTION_PWM, _reg, _fld, 0)
+
+/* Pins always support GPIO, and may support one alternate function */
+static const struct rtl8231_pin_desc rtl8231_pins[RTL8231_NUM_GPIOS] = {
+	RTL8231_LED_PIN(0, RTL8231_REG_PIN_MODE0, 0),
+	RTL8231_LED_PIN(1, RTL8231_REG_PIN_MODE0, 1),
+	RTL8231_LED_PIN(2, RTL8231_REG_PIN_MODE0, 2),
+	RTL8231_LED_PIN(3, RTL8231_REG_PIN_MODE0, 3),
+	RTL8231_LED_PIN(4, RTL8231_REG_PIN_MODE0, 4),
+	RTL8231_LED_PIN(5, RTL8231_REG_PIN_MODE0, 5),
+	RTL8231_LED_PIN(6, RTL8231_REG_PIN_MODE0, 6),
+	RTL8231_LED_PIN(7, RTL8231_REG_PIN_MODE0, 7),
+	RTL8231_LED_PIN(8, RTL8231_REG_PIN_MODE0, 8),
+	RTL8231_LED_PIN(9, RTL8231_REG_PIN_MODE0, 9),
+	RTL8231_LED_PIN(10, RTL8231_REG_PIN_MODE0, 10),
+	RTL8231_LED_PIN(11, RTL8231_REG_PIN_MODE0, 11),
+	RTL8231_LED_PIN(12, RTL8231_REG_PIN_MODE0, 12),
+	RTL8231_LED_PIN(13, RTL8231_REG_PIN_MODE0, 13),
+	RTL8231_LED_PIN(14, RTL8231_REG_PIN_MODE0, 14),
+	RTL8231_LED_PIN(15, RTL8231_REG_PIN_MODE0, 15),
+	RTL8231_LED_PIN(16, RTL8231_REG_PIN_MODE1, 0),
+	RTL8231_LED_PIN(17, RTL8231_REG_PIN_MODE1, 1),
+	RTL8231_LED_PIN(18, RTL8231_REG_PIN_MODE1, 2),
+	RTL8231_LED_PIN(19, RTL8231_REG_PIN_MODE1, 3),
+	RTL8231_LED_PIN(20, RTL8231_REG_PIN_MODE1, 4),
+	RTL8231_LED_PIN(21, RTL8231_REG_PIN_MODE1, 5),
+	RTL8231_LED_PIN(22, RTL8231_REG_PIN_MODE1, 6),
+	RTL8231_LED_PIN(23, RTL8231_REG_PIN_MODE1, 7),
+	RTL8231_LED_PIN(24, RTL8231_REG_PIN_MODE1, 8),
+	RTL8231_LED_PIN(25, RTL8231_REG_PIN_MODE1, 9),
+	RTL8231_LED_PIN(26, RTL8231_REG_PIN_MODE1, 10),
+	RTL8231_LED_PIN(27, RTL8231_REG_PIN_MODE1, 11),
+	RTL8231_LED_PIN(28, RTL8231_REG_PIN_MODE1, 12),
+	RTL8231_LED_PIN(29, RTL8231_REG_PIN_MODE1, 13),
+	RTL8231_LED_PIN(30, RTL8231_REG_PIN_MODE1, 14),
+	RTL8231_LED_PIN(31, RTL8231_REG_PIN_MODE1, 15),
+	RTL8231_LED_PIN(32, RTL8231_REG_PIN_HI_CFG, 0),
+	RTL8231_LED_PIN(33, RTL8231_REG_PIN_HI_CFG, 1),
+	RTL8231_LED_PIN(34, RTL8231_REG_PIN_HI_CFG, 2),
+	RTL8231_PWM_PIN(35, RTL8231_REG_FUNC1, 3),
+	RTL8231_GPIO_PIN(36),
+};
+
+static int rtl8231_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(rtl8231_pins);
+}
+
+static const char *rtl8231_get_group_name(struct pinctrl_dev *pctldev, unsigned int selector)
+{
+	return rtl8231_pins[selector].name;
+}
+
+static int rtl8231_get_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
+	const unsigned int **pins, unsigned int *num_pins)
+{
+	if (selector < ARRAY_SIZE(rtl8231_pins)) {
+		*pins = &rtl8231_pins[selector].number;
+		*num_pins = 1;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static const struct pinctrl_ops rtl8231_pinctrl_ops = {
+	.get_groups_count = rtl8231_get_groups_count,
+	.get_group_name = rtl8231_get_group_name,
+	.get_group_pins = rtl8231_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
+	.dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int rtl8231_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ctrl->nfunctions;
+}
+
+static const char *rtl8231_get_function_name(struct pinctrl_dev *pctldev, unsigned int selector)
+{
+	struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	return ctrl->functions[selector].name;
+}
+
+static int rtl8231_get_function_groups(struct pinctrl_dev *pctldev, unsigned int selector,
+	const char * const **groups, unsigned int *num_groups)
+{
+	struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = ctrl->functions[selector].groups;
+	*num_groups = ctrl->functions[selector].ngroups;
+	return 0;
+}
+
+static int rtl8231_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
+	unsigned int group_selector)
+{
+	struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct rtl8231_pin_desc *desc = &rtl8231_pins[group_selector];
+	unsigned int func_flag = BIT(func_selector);
+	unsigned int function_mask;
+	unsigned int gpio_function;
+	int err = 0;
+
+	if (!(desc->functions & func_flag))
+		return -EINVAL;
+
+	function_mask = BIT(desc->offset);
+	gpio_function = desc->gpio_function_value << desc->offset;
+
+	switch (func_flag) {
+	case RTL8231_PIN_FUNCTION_LED:
+	case RTL8231_PIN_FUNCTION_PWM:
+		err = regmap_update_bits(ctrl->map, desc->reg, function_mask, ~gpio_function);
+		break;
+	case RTL8231_PIN_FUNCTION_GPIO:
+		err = regmap_update_bits(ctrl->map, desc->reg, function_mask, gpio_function);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err;
+}
+
+static int rtl8231_gpio_request_enable(struct pinctrl_dev *pctldev,
+	struct pinctrl_gpio_range *range, unsigned int offset)
+{
+	struct rtl8231_pin_ctrl *ctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct rtl8231_pin_desc *desc = &rtl8231_pins[offset];
+	unsigned int function_mask;
+	unsigned int gpio_function;
+
+	function_mask = BIT(desc->offset);
+	gpio_function = desc->gpio_function_value << desc->offset;
+
+	return regmap_update_bits(ctrl->map, desc->reg, function_mask, gpio_function);
+}
+
+static const struct pinmux_ops rtl8231_pinmux_ops = {
+	.set_mux = rtl8231_set_mux,
+	.get_functions_count = rtl8231_get_functions_count,
+	.get_function_name = rtl8231_get_function_name,
+	.get_function_groups = rtl8231_get_function_groups,
+	.gpio_request_enable = rtl8231_gpio_request_enable,
+	.strict = true
+};
+
+
+static int rtl8231_pinctrl_init_functions(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
+{
+	struct rtl8231_function *function;
+	const char **group_name;
+	unsigned int f_idx;
+	unsigned int pin;
+
+	ctrl->nfunctions = ARRAY_SIZE(rtl8231_pin_function_names);
+	ctrl->functions = devm_kcalloc(dev, ctrl->nfunctions, sizeof(*ctrl->functions), GFP_KERNEL);
+	if (IS_ERR(ctrl->functions)) {
+		dev_err(dev, "failed to allocate pin function descriptors\n");
+		return PTR_ERR(ctrl->functions);
+	}
+
+	for (f_idx = 0; f_idx < ctrl->nfunctions; f_idx++) {
+		function = &ctrl->functions[f_idx];
+		function->name = rtl8231_pin_function_names[f_idx];
+
+		for (pin = 0; pin < ctrl->pctl_desc.npins; pin++)
+			if (rtl8231_pins[pin].functions & BIT(f_idx))
+				function->ngroups++;
+
+		function->groups = devm_kcalloc(dev, function->ngroups,
+			sizeof(*function->groups), GFP_KERNEL);
+		if (IS_ERR(function->groups)) {
+			dev_err(dev, "failed to allocate pin function group names\n");
+			return PTR_ERR(function->groups);
+		}
+
+		group_name = function->groups;
+		for (pin = 0; pin < ctrl->pctl_desc.npins; pin++)
+			if (rtl8231_pins[pin].functions & BIT(f_idx))
+				*group_name++ = rtl8231_pins[pin].name;
+	}
+
+	return 0;
+}
+
+static int rtl8231_pinctrl_init(struct device *dev, struct rtl8231_pin_ctrl *ctrl)
+{
+	struct pinctrl_dev *pctl;
+	struct pinctrl_pin_desc *pins;
+	unsigned int pin;
+	int err = 0;
+
+	ctrl->pctl_desc.name = "rtl8231-pinctrl",
+	ctrl->pctl_desc.owner = THIS_MODULE,
+	ctrl->pctl_desc.pctlops = &rtl8231_pinctrl_ops,
+	ctrl->pctl_desc.pmxops = &rtl8231_pinmux_ops,
+
+	ctrl->pctl_desc.npins = ARRAY_SIZE(rtl8231_pins);
+	pins = devm_kcalloc(dev, ctrl->pctl_desc.npins, sizeof(*pins), GFP_KERNEL);
+	if (IS_ERR(pins)) {
+		dev_err(dev, "failed to allocate pin descriptors\n");
+		return PTR_ERR(pins);
+	}
+	ctrl->pctl_desc.pins = pins;
+
+	for (pin = 0; pin < ctrl->pctl_desc.npins; pin++) {
+		pins[pin].number = rtl8231_pins[pin].number;
+		pins[pin].name = rtl8231_pins[pin].name;
+	}
+
+	err = rtl8231_pinctrl_init_functions(dev, ctrl);
+	if (err)
+		return err;
+
+	err = devm_pinctrl_register_and_init(dev->parent, &ctrl->pctl_desc, ctrl, &pctl);
+	if (err) {
+		dev_err(dev, "failed to register pin controller\n");
+		return err;
+	}
+
+	err = pinctrl_enable(pctl);
+	if (err)
+		dev_err(dev, "failed to enable pin controller\n");
+
+	return err;
+}
+
+/*
+ * GPIO controller functionality
+ */
+static int rtl8231_gpio_reg_mask_xlate(struct gpio_regmap *gpio, unsigned int base,
+	unsigned int offset, unsigned int *reg, unsigned int *mask)
+{
+	unsigned int pin_mask = BIT(offset % RTL8231_BITS_VAL);
+
+	if (base == RTL8231_REG_GPIO_DATA0 || offset < 32) {
+		*reg = base + offset / RTL8231_BITS_VAL;
+		*mask = pin_mask;
+	} else if (base == RTL8231_REG_GPIO_DIR0) {
+		*reg = RTL8231_REG_PIN_HI_CFG;
+		*mask = FIELD_PREP(RTL8231_PIN_HI_CFG_DIR_MASK, pin_mask);
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rtl8231_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rtl8231_pin_ctrl *ctrl;
+	struct gpio_regmap_config gpio_cfg = {};
+	struct gpio_regmap *gr;
+	int err;
+
+	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->map = dev_get_regmap(dev->parent, NULL);
+	if (IS_ERR_OR_NULL(ctrl->map)) {
+		dev_err(dev, "failed to retrieve regmap\n");
+		if (!ctrl->map)
+			return -ENODEV;
+		else
+			return PTR_ERR(ctrl->map);
+	}
+
+	err = rtl8231_pinctrl_init(dev, ctrl);
+	if (err)
+		return err;
+
+	gpio_cfg.regmap = ctrl->map;
+	gpio_cfg.parent = dev->parent;
+	gpio_cfg.ngpio = RTL8231_NUM_GPIOS;
+	gpio_cfg.ngpio_per_reg = RTL8231_BITS_VAL;
+
+	gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
+	gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
+	gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);
+	gpio_cfg.no_set_on_input = true;
+
+	gpio_cfg.reg_mask_xlate = rtl8231_gpio_reg_mask_xlate;
+
+	gr = devm_gpio_regmap_register(dev, &gpio_cfg);
+	if (IS_ERR(gr)) {
+		dev_err(dev, "failed to register gpio controller\n");
+		return PTR_ERR(gr);
+	}
+
+	return 0;
+}
+
+static struct platform_driver rtl8231_pinctrl_driver = {
+	.driver = {
+		.name = "rtl8231-pinctrl",
+	},
+	.probe = rtl8231_pinctrl_probe,
+};
+module_platform_driver(rtl8231_pinctrl_driver);
+
+MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
+MODULE_DESCRIPTION("Realtek RTL8231 pin control and GPIO support");
+MODULE_LICENSE("GPL v2");