| Message ID | 1621232088-12567-2-git-send-email-zhengxunli@mxic.com.tw |
|---|---|
| State | New |
| Headers | show |
| Series | Add octal DTR support for Macronix flash | expand |
Hi Tudor, Vigneshr, Hope you’re having a great day! Would you help to review this series? "Pratyush Yadav" <p.yadav@ti.com> wrote on 2021/05/17 下午 03:33:06: > "Pratyush Yadav" <p.yadav@ti.com> > 2021/05/17 下午 03:33 > > To > > "Zhengxun Li" <zhengxunli@mxic.com.tw>, > > cc > > <linux-mtd@lists.infradead.org>, <linux-spi@vger.kernel.org>, > <tudor.ambarus@microchip.com>, <miquel.raynal@bootlin.com>, > <broonie@kernel.org>, <jaimeliao@mxic.com.tw> > > Subject > > Re: [PATCH v5 1/2] mtd: spi-nor: macronix: add support for Macronix octaflash > > On 17/05/21 02:14PM, Zhengxun Li wrote: > > The octaflash is an xSPI compliant octal DTR flash. Add support > > for using it in octal DTR mode. > > > > Try to verify the flash ID to check whether the flash memory in octal > > DTR mode and SPI mode are correct. When reading ID in OCTAL DTR mode, > > ID will appear in a repeated manner. ex: ID[0] = 0xc2, ID[1] = 0xc2, > > ID[2] = 0x94, ID[3] = 0x94... Rearrange the order so that the ID can pass. > > > > The octaflash series can be divided into the following types: > > > > MX25 series : Serial NOR Flash. > > MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb) > > LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation. > > LW/UW series : Support simultaneous Read-while-Write operation in multiple > > bank architecture. Read-while-write feature which means read > > data one bank while another bank is programing or erasing. > > > > MX25LM : 3.0V Octal I/O > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/ > MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf > > > > MX25UM : 1.8V Octal I/O > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/ > MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf > > > > MX66LM : 3.0V Octal I/O with stacked die > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/ > MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf > > > > MX66UM : 1.8V Octal I/O with stacked die > > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/ > MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf > > > > MX25LW : 3.0V Octal I/O with Read-while-Write > > MX25UW : 1.8V Octal I/O with Read-while-Write > > MX66LW : 3.0V Octal I/O with Read-while-Write and stack die > > MX66UW : 1.8V Octal I/O with Read-while-Write and stack die > > > > About LW/UW series, please contact us freely if you have any > > questions. For adding Octal NOR Flash IDs, we have validated > > each Flash on plateform zynq-picozed. > > > > Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> > > Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Thanks, Zhengxun CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
On 5/17/21 9:14 AM, Zhengxun Li wrote: > + { "mx66lm1g45g", INFO(0xc2853b, 0, 32 * 1024, 4096, > + SECT_4K | SPI_NOR_OCTAL_DTR_READ | > + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) > + .fixups = &octaflash_fixups }, I have a mx66lm1g45g which does not define SFDP tables, how you'll differentiate between the two? Mine will fail after reset. I'm working to address the flash ID collisions, will send patches soon. I won't queue any new flash additions until we'll solve the ID collisions problem.
Hi Tudor, <Tudor.Ambarus@microchip.com> wrote on 2021/06/29 下午 02:37:01: > <Tudor.Ambarus@microchip.com> > 2021/06/29 下午 02:37 > > To > > <zhengxunli@mxic.com.tw>, <linux-mtd@lists.infradead.org>, <linux- > spi@vger.kernel.org>, > > cc > > <p.yadav@ti.com>, <miquel.raynal@bootlin.com>, <broonie@kernel.org>, > <jaimeliao@mxic.com.tw> > > Subject > > Re: [PATCH v5 1/2] mtd: spi-nor: macronix: add support for Macronix octaflash > > On 5/17/21 9:14 AM, Zhengxun Li wrote: > > + { "mx66lm1g45g", INFO(0xc2853b, 0, 32 * 1024, 4096, > > + SECT_4K | SPI_NOR_OCTAL_DTR_READ | > > + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) > > + .fixups = &octaflash_fixups }, > > I have a mx66lm1g45g which does not define SFDP tables, how you'll > differentiate > between the two? > Mine will fail after reset. I'm working to address > the flash ID > collisions, will send patches soon. I won't queue any new flash > additions until > we'll solve the ID collisions problem. Sorry for the inconvenience. I will discuss with our flash team as soon as possible. Thanks, Zhengxun CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
Hi Tudor, > Subject > > Re: [PATCH v5 1/2] mtd: spi-nor: macronix: add support for Macronix octaflash > > On 5/17/21 9:14 AM, Zhengxun Li wrote: > > + { "mx66lm1g45g", INFO(0xc2853b, 0, 32 * 1024, 4096, > > + SECT_4K | SPI_NOR_OCTAL_DTR_READ | > > + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) > > + .fixups = &octaflash_fixups }, > > I have a mx66lm1g45g which does not define SFDP tables, how you'll > differentiate > between the two? Mine will fail after reset. I'm working to address > the flash ID > collisions, will send patches soon. I won't queue any new flash > additions until > we'll solve the ID collisions problem. I asked our flash team, unfortunately, they said that due to SFDP on octaflash not existing from beginning, therefore, some old parts may not support the SFDP parameter inside the Flash. For MX66LM1G45G, we have SFDP available from 2020/03. However, other flash maybe meet the same problem, I will update them later. As for ID conflicts, I will discuss with them which series of flash has encountered this problem, and I will update it later. Thanks, Zhengxun CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c index 42c2cf3..f4b33c0 100644 --- a/drivers/mtd/spi-nor/macronix.c +++ b/drivers/mtd/spi-nor/macronix.c @@ -8,6 +8,12 @@ #include "core.h" +#define SPINOR_OP_RD_CR2 0x71 /* Read configuration register 2 */ +#define SPINOR_OP_WR_CR2 0x72 /* Write configuration register 2 */ +#define SPINOR_REG_MXIC_CR2_MODE 0x00000000 /* For setting octal DTR mode */ +#define SPINOR_REG_MXIC_OPI_DTR_EN 0x2 /* Enable Octal DTR */ +#define SPINOR_REG_MXIC_SPI_EN 0x0 /* Enable SPI */ + static int mx25l25635_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, @@ -32,6 +38,85 @@ .post_bfpt = mx25l25635_post_bfpt_fixups, }; +/** + * spi_nor_macronix_octal_dtr_enable() - Enable octal DTR on Macronix flashes. + * @nor: pointer to a 'struct spi_nor' + * @enable: whether to enable Octal DTR or switch back to SPI + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_macronix_octal_dtr_enable(struct spi_nor *nor, bool enable) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf, i; + int ret; + + /* Set/unset the octal and DTR enable bits. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + if (enable) { + buf[0] = SPINOR_REG_MXIC_OPI_DTR_EN; + } else { + /* + * The register is 1-byte wide, but 1-byte transactions are not + * allowed in 8D-8D-8D mode. Since there is no register at the + * next location, just initialize the value to 0 and let the + * transaction go on. + */ + buf[0] = SPINOR_REG_MXIC_SPI_EN; + buf[1] = 0x0; + } + + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_CR2, 1), + SPI_MEM_OP_ADDR(4, SPINOR_REG_MXIC_CR2_MODE, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(enable ? 1 : 2, buf, 1)); + + if (!enable) + spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR); + + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + /* Read flash ID to make sure the switch was successful. */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), + SPI_MEM_OP_ADDR(enable ? 4 : 0, 0, 1), + SPI_MEM_OP_DUMMY(enable ? 4 : 0, 1), + SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, buf, 1)); + + if (enable) + spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR); + + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + if (enable) { + for (i = 0; i < nor->info->id_len; i++) + if (buf[i * 2] != nor->info->id[i]) + return -EINVAL; + } else { + if (memcmp(buf, nor->info->id, nor->info->id_len)) + return -EINVAL; + } + + return 0; +} + +static void octaflash_default_init(struct spi_nor *nor) +{ + nor->params->octal_dtr_enable = spi_nor_macronix_octal_dtr_enable; +} + +static struct spi_nor_fixups octaflash_fixups = { + .default_init = octaflash_default_init, +}; + static const struct flash_info macronix_parts[] = { /* Macronix */ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) }, @@ -86,6 +171,106 @@ { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { "mx66lm2g45g", INFO(0xc2853c, 0, 64 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66lm1g45g", INFO(0xc2853b, 0, 32 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66lw1g45g", INFO(0xc2863b, 0, 32 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25lm51245g", INFO(0xc2853a, 0, 16 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25lw51245g", INFO(0xc2863a, 0, 16 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25lm25645g", INFO(0xc28539, 0, 8 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25lw25645g", INFO(0xc28639, 0, 8 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66um2g45g", INFO(0xc2803c, 0, 64 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66uw2g345g", INFO(0xc2843c, 0, 64 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66uw2g345gx0", INFO(0xc2943c, 0, 64 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66um1g45g", INFO(0xc2803b, 0, 32 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66um1g45g40", INFO(0xc2808b, 0, 32 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx66uw1g45g", INFO(0xc2813b, 0, 32 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25um51245g", INFO(0xc2803a, 0, 16 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw51245g", INFO(0xc2813a, 0, 16 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw51345g", INFO(0xc2843a, 0, 16 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25um25645g", INFO(0xc28039, 0, 8 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw25645g", INFO(0xc28139, 0, 8 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25um25345g", INFO(0xc28339, 0, 8 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw25345g", INFO(0xc28439, 0, 8 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw12845g", INFO(0xc28138, 0, 4 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw12a45g", INFO(0xc28938, 0, 4 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw12345g", INFO(0xc28438, 0, 4 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw6445g", INFO(0xc28137, 0, 2 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, + { "mx25uw6345g", INFO(0xc28437, 0, 2 * 1024, 4096, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES) + .fixups = &octaflash_fixups }, }; static void macronix_default_init(struct spi_nor *nor)
The octaflash is an xSPI compliant octal DTR flash. Add support for using it in octal DTR mode. Try to verify the flash ID to check whether the flash memory in octal DTR mode and SPI mode are correct. When reading ID in OCTAL DTR mode, ID will appear in a repeated manner. ex: ID[0] = 0xc2, ID[1] = 0xc2, ID[2] = 0x94, ID[3] = 0x94... Rearrange the order so that the ID can pass. The octaflash series can be divided into the following types: MX25 series : Serial NOR Flash. MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb) LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation. LW/UW series : Support simultaneous Read-while-Write operation in multiple bank architecture. Read-while-write feature which means read data one bank while another bank is programing or erasing. MX25LM : 3.0V Octal I/O -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf MX25UM : 1.8V Octal I/O -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf MX66LM : 3.0V Octal I/O with stacked die -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf MX66UM : 1.8V Octal I/O with stacked die -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf MX25LW : 3.0V Octal I/O with Read-while-Write MX25UW : 1.8V Octal I/O with Read-while-Write MX66LW : 3.0V Octal I/O with Read-while-Write and stack die MX66UW : 1.8V Octal I/O with Read-while-Write and stack die About LW/UW series, please contact us freely if you have any questions. For adding Octal NOR Flash IDs, we have validated each Flash on plateform zynq-picozed. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> --- drivers/mtd/spi-nor/macronix.c | 185 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 185 insertions(+)