@@ -234,15 +234,15 @@ __tc_sample_rate_test()
psample_capture_start
- ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
-B $dip -t udp dp=52768,sp=42768 -q
psample_capture_stop
pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
- pct=$((100 * (pkts - 100) / 100))
+ pct=$((100 * (pkts - 10000) / 10000))
(( -25 <= pct && pct <= 25))
- check_err $? "Expected 100 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
+ check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
log_test "tc sample rate ($desc)"
@@ -587,15 +587,15 @@ __tc_sample_acl_rate_test()
psample_capture_start
- ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ ip vrf exec v$h1 $MZ $h1 -c 320000 -d 100usec -p 64 -A 192.0.2.1 \
-B 198.51.100.1 -t udp dp=52768,sp=42768 -q
psample_capture_stop
pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
- pct=$((100 * (pkts - 100) / 100))
+ pct=$((100 * (pkts - 10000) / 10000))
(( -25 <= pct && pct <= 25))
- check_err $? "Expected 100 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
+ check_err $? "Expected 10000 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
# Setup a filter that should not match any packet and make sure packets
# are not sampled.
The test sometimes fails with an error message such as: TEST: tc sample (w/ flower) rate (egress) [FAIL] Expected 100 packets, got 70 packets, which is -30% off. Required accuracy is +-25% Make the test more robust by generating more packets, therefore increasing the number of expected samples. Decrease the transmission delay in order not to needlessly prolong the test. Signed-off-by: Ido Schimmel <idosch@nvidia.com> --- .../testing/selftests/drivers/net/mlxsw/tc_sample.sh | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)