@@ -45,9 +45,14 @@ fffe8000 fffeffff DTCM mapping area for
fffe0000 fffe7fff ITCM mapping area for platforms with
ITCM mounted inside the CPU.
-ffc00000 ffefffff Fixmap mapping region. Addresses provided
+ffc80000 ffefffff Fixmap mapping region. Addresses provided
by fix_to_virt() will be located here.
+ffc00000 ffc7ffff Guard region
+
+ff800000 ffbfffff Permanent, fixed read-only mapping of the
+ firmware provided DT blob
+
fee00000 feffffff Mapping of PCI I/O space. This is a static
mapping within the vmalloc space.
@@ -2,7 +2,7 @@
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-#define FIXADDR_START 0xffc00000UL
+#define FIXADDR_START 0xffc80000UL
#define FIXADDR_END 0xfff00000UL
#define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE)
@@ -67,6 +67,10 @@
*/
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
+#define FDT_FIXED_BASE UL(0xff800000)
+#define FDT_FIXED_SIZE (2 * PMD_SIZE)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Allow 16MB-aligned ioremap pages
@@ -107,6 +111,7 @@ extern unsigned long vectors_base;
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr))
#endif /* !CONFIG_MMU */
@@ -275,9 +275,8 @@ __create_page_tables:
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
- subne r3, r0, r8
- addne r3, r3, #PAGE_OFFSET
- addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
+ ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+ addne r3, r3, r4
orrne r6, r7, r0
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
@@ -18,6 +18,7 @@
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
+#include <linux/libfdt.h>
#include <linux/of_fdt.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
@@ -89,7 +90,6 @@ unsigned int cacheid __read_mostly;
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
-void *atags_vaddr __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
@@ -1077,13 +1077,18 @@ void __init hyp_mode_check(void)
void __init setup_arch(char **cmdline_p)
{
const struct machine_desc *mdesc = NULL;
+ void *atags_vaddr = NULL;
if (__atags_pointer)
- atags_vaddr = phys_to_virt(__atags_pointer);
+ atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
setup_processor();
- if (atags_vaddr)
+ if (atags_vaddr) {
mdesc = setup_machine_fdt(atags_vaddr);
+ if (mdesc)
+ memblock_reserve(__atags_pointer,
+ fdt_totalsize(atags_vaddr));
+ }
if (!mdesc)
mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
if (!mdesc) {
@@ -274,7 +274,6 @@ void __init arm_memblock_init(const stru
if (mdesc->reserve)
mdesc->reserve();
- early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
/* reserve memory for DMA contiguous allocations */
@@ -39,6 +39,8 @@
#include "mm.h"
#include "tcm.h"
+extern unsigned long __atags_pointer;
+
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
@@ -962,7 +964,7 @@ static void __init create_mapping(struct
return;
}
- if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ if (md->type == MT_DEVICE &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1352,6 +1354,15 @@ static void __init devicemaps_init(const
for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
+ if (__atags_pointer) {
+ /* create a read-only mapping of the device tree */
+ map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+ map.virtual = FDT_FIXED_BASE;
+ map.length = FDT_FIXED_SIZE;
+ map.type = MT_ROM;
+ create_mapping(&map);
+ }
+
/*
* Map the kernel if it is XIP.
* It is always first in the modulearea.
@@ -1512,8 +1523,7 @@ static void __init map_lowmem(void)
}
#ifdef CONFIG_ARM_PV_FIXUP
-extern void *atags_vaddr;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
pgtables_remap lpae_pgtables_remap_asm;
/*
@@ -1526,7 +1536,6 @@ static void __init early_paging_init(con
unsigned long pa_pgd;
unsigned int cr, ttbcr;
long long offset;
- void *boot_data;
if (!mdesc->pv_fixup)
return;
@@ -1543,7 +1552,6 @@ static void __init early_paging_init(con
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
- boot_data = atags_vaddr;
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
@@ -1579,7 +1587,7 @@ static void __init early_paging_init(con
* needs to be assembly. It's fairly simple, as we're using the
* temporary tables setup by the initial assembly code.
*/
- lpae_pgtables_remap(offset, pa_pgd, boot_data);
+ lpae_pgtables_remap(offset, pa_pgd);
/* Re-enable the caches and cacheable TLB walks */
asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
@@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm)
/* Update level 2 entries for the boot data */
add r7, r2, #0x1000
- add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
- bic r7, r7, #(1 << L2_ORDER) - 1
+ movw r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+ add r7, r7, r3
ldrd r4, r5, [r7]
adds r4, r4, r0
adc r5, r5, r1