| Message ID | 1621232088-12567-3-git-send-email-zhengxunli@mxic.com.tw |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add octal DTR support for Macronix flash | expand |
Hi, "Pratyush Yadav" <p.yadav@ti.com> wrote on 2021/05/18 上午 12:06:30: > "Pratyush Yadav" <p.yadav@ti.com> > 2021/05/18 上午 12:06 > > To > > "Zhengxun Li" <zhengxunli@mxic.com.tw>, > > cc > > <linux-mtd@lists.infradead.org>, <linux-spi@vger.kernel.org>, > <tudor.ambarus@microchip.com>, <miquel.raynal@bootlin.com>, > <broonie@kernel.org>, <jaimeliao@mxic.com.tw> > > Subject > > Re: [PATCH v5 2/2] spi: mxic: patch for octal DTR mode support > > On 17/05/21 02:14PM, Zhengxun Li wrote: > > Driver patch for octal DTR mode support. > > > > Owing to the spi_mem_default_supports_op() is not support dtr > > operation. Based on Pratyush patch "spi: spi-mem: add spi_mem_dtr > > I don't like the "Based on Pratyush patch". Please mention the commit > hash so it is much easier to find later. For example, saying based on > commit 539cf68cd51b (spi: spi-mem: add spi_mem_dtr_supports_op(), > 2021-02-04) is much better. > > But while we are on this topic, I don't think it is needed all that > much. People use pre-existing APIs all the time. I don't see any need to > specifically point it out. So I think saying "Call > spi_mem_dtr_supports_op() to ..." is better. Thanks for your suggestion. > > _supports_op()" add spi_mem_dtr_supports_op() to support dtr and > > keep checking the buswidth and command bytes. > > > > Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> > > --- Thanks, Zhengxun CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 96b4182..32e757a 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf, static bool mxic_spi_mem_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) { - if (op->data.buswidth > 4 || op->addr.buswidth > 4 || - op->dummy.buswidth > 4 || op->cmd.buswidth > 4) + bool all_false; + + if (op->data.buswidth > 8 || op->addr.buswidth > 8 || + op->dummy.buswidth > 8 || op->cmd.buswidth > 8) return false; if (op->data.nbytes && op->dummy.nbytes && @@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem, if (op->addr.nbytes > 7) return false; - return spi_mem_default_supports_op(mem, op); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && + !op->data.dtr; + + if (all_false) + return spi_mem_default_supports_op(mem, op); + else + return spi_mem_dtr_supports_op(mem, op); } static int mxic_spi_mem_exec_op(struct spi_mem *mem, @@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master); int nio = 1, i, ret; u32 ss_ctrl; - u8 addr[8]; - u8 opcode = op->cmd.opcode; + u8 addr[8], cmd[2]; ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz); if (ret) return ret; - if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) + if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL)) + nio = 8; + else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) nio = 4; else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) nio = 2; @@ -374,19 +383,25 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, mxic->regs + HC_CFG); writel(HC_EN_BIT, mxic->regs + HC_EN); - ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1); + ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) | + OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) | + (op->cmd.dtr ? OP_CMD_DDR : 0); if (op->addr.nbytes) ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) | - OP_ADDR_BUSW(fls(op->addr.buswidth) - 1); + OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) | + (op->addr.dtr ? OP_ADDR_DDR : 0); if (op->dummy.nbytes) ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes); if (op->data.nbytes) { - ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1); + ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) | + (op->data.dtr ? OP_DATA_DDR : 0); if (op->data.dir == SPI_MEM_DATA_IN) ss_ctrl |= OP_READ; + if (op->data.dtr) + ss_ctrl |= OP_DQS_EN; } writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select)); @@ -394,7 +409,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT, mxic->regs + HC_CFG); - ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1); + for (i = 0; i < op->cmd.nbytes; i++) + cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1)); + + ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes); if (ret) goto out; @@ -567,7 +585,8 @@ static int mxic_spi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_MASK(8); master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_TX_DUAL | - SPI_RX_QUAD | SPI_TX_QUAD; + SPI_RX_QUAD | SPI_TX_QUAD | + SPI_RX_OCTAL | SPI_TX_OCTAL; mxic_spi_hw_init(mxic);
Driver patch for octal DTR mode support. Owing to the spi_mem_default_supports_op() is not support dtr operation. Based on Pratyush patch "spi: spi-mem: add spi_mem_dtr _supports_op()" add spi_mem_dtr_supports_op() to support dtr and keep checking the buswidth and command bytes. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> --- drivers/spi/spi-mxic.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-)