diff mbox series

[v3,13/17] crypto: qce: core: Make clocks optional

Message ID 20210519143700.27392-14-bhupesh.sharma@linaro.org
State New
Headers show
Series Enable Qualcomm Crypto Engine on sm8250 | expand

Commit Message

Bhupesh Sharma May 19, 2021, 2:36 p.m. UTC
From: Thara Gopinath <thara.gopinath@linaro.org>


On certain Snapdragon processors, the crypto engine clocks are enabled by
default by security firmware and the driver need not handle the
clocks. Make acquiring of all the clocks optional in crypto enginer driver
so that the driver intializes properly even if no clocks are specified in
the dt.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: bhupesh.linux@gmail.com
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

[ bhupesh.sharma@linaro.org: Make clock enablement optional only for qcom parts where
  firmware has already initialized them, using a bool variable and fix
  error paths ]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

---
 drivers/crypto/qce/core.c | 89 +++++++++++++++++++++++++--------------
 drivers/crypto/qce/core.h |  2 +
 2 files changed, 59 insertions(+), 32 deletions(-)

-- 
2.31.1

Comments

Thara Gopinath May 21, 2021, 2:11 a.m. UTC | #1
Hi Bhupesh,

On 5/19/21 10:36 AM, Bhupesh Sharma wrote:
> From: Thara Gopinath <thara.gopinath@linaro.org>
> 
> On certain Snapdragon processors, the crypto engine clocks are enabled by
> default by security firmware and the driver need not handle the
> clocks. Make acquiring of all the clocks optional in crypto enginer driver
> so that the driver intializes properly even if no clocks are specified in
> the dt.
> 
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: dmaengine@vger.kernel.org
> Cc: linux-clk@vger.kernel.org
> Cc: linux-crypto@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: bhupesh.linux@gmail.com
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> [ bhupesh.sharma@linaro.org: Make clock enablement optional only for qcom parts where
>    firmware has already initialized them, using a bool variable and fix
>    error paths ]
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>   drivers/crypto/qce/core.c | 89 +++++++++++++++++++++++++--------------
>   drivers/crypto/qce/core.h |  2 +
>   2 files changed, 59 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
> index 905378906ac7..8c3c68ba579e 100644
> --- a/drivers/crypto/qce/core.c
> +++ b/drivers/crypto/qce/core.c
> @@ -9,6 +9,7 @@
>   #include <linux/interrupt.h>
>   #include <linux/module.h>
>   #include <linux/mod_devicetable.h>
> +#include <linux/of_device.h>
>   #include <linux/platform_device.h>
>   #include <linux/spinlock.h>
>   #include <linux/types.h>
> @@ -184,10 +185,20 @@ static int qce_check_version(struct qce_device *qce)
>   	return 0;
>   }
>   
> +static const struct of_device_id qce_crypto_of_match[] = {
> +	{ .compatible = "qcom,ipq6018-qce", },
> +	{ .compatible = "qcom,sdm845-qce", },
> +	{ .compatible = "qcom,sm8250-qce", },

Adding qcom,sm8250-qce does not belong in this patch. It deserves a 
separate patch of it's own.

> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
> +
>   static int qce_crypto_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
>   	struct qce_device *qce;
> +	const struct of_device_id *of_id =
> +			of_match_device(qce_crypto_of_match, &pdev->dev);
>   	int ret;
>   
>   	qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);
> @@ -198,45 +209,65 @@ static int qce_crypto_probe(struct platform_device *pdev)
>   	platform_set_drvdata(pdev, qce);
>   
>   	qce->base = devm_platform_ioremap_resource(pdev, 0);
> -	if (IS_ERR(qce->base))
> -		return PTR_ERR(qce->base);
> +	if (IS_ERR(qce->base)) {
> +		ret = PTR_ERR(qce->base);
> +		goto err_out;
> +	}

I don't see the reason for change in error handling here or below. But 
,for whatever reason this is changed, it has to be a separate patch.

>   
>   	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>   	if (ret < 0)
> -		return ret;
> +		goto err_out;
>   
>   	qce->mem_path = devm_of_icc_get(qce->dev, "memory");
>   	if (IS_ERR(qce->mem_path))
>   		return dev_err_probe(dev, PTR_ERR(qce->mem_path),
>   				     "Failed to get mem path\n");
>   
> -	qce->core = devm_clk_get(qce->dev, "core");
> -	if (IS_ERR(qce->core))
> -		return PTR_ERR(qce->core);
> -
> -	qce->iface = devm_clk_get(qce->dev, "iface");
> -	if (IS_ERR(qce->iface))
> -		return PTR_ERR(qce->iface);
> -
> -	qce->bus = devm_clk_get(qce->dev, "bus");
> -	if (IS_ERR(qce->bus))
> -		return PTR_ERR(qce->bus);
> -
>   	ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);
>   	if (ret)
> -		return ret;
> +		goto err_out;
>   
> -	ret = clk_prepare_enable(qce->core);
> -	if (ret)
> -		return ret;
> +	/* On some qcom parts the crypto clocks are already configured by
> +	 * the firmware running before linux. In such cases we don't need to
> +	 * enable/configure them again. Check here for the same.
> +	 */
> +	if (!strcmp(of_id->compatible, "qcom,ipq6018-qce") ||
> +	    !strcmp(of_id->compatible, "qcom,sdm845-qce"))

You can avoid this and most of this patch by using 
devm_clk_get_optional. This patch can be like just three lines of code 
change. clk_prepare_enable returns 0 if the clock is null. There is no 
need to check for the compatibles above. Use devm_clk_get_optional 
instead of devm_clk_get and everything else can be left as is.

Warm Regards
Thara

> +		qce->clks_configured_by_fw = false;
> +	else
> +		qce->clks_configured_by_fw = true;
> +
> +	if (!qce->clks_configured_by_fw) {
> +		qce->core = devm_clk_get(qce->dev, "core");
> +		if (IS_ERR(qce->core)) {
> +			ret = PTR_ERR(qce->core);
> +			goto err_out;
> +		}
> +
> +		qce->iface = devm_clk_get(qce->dev, "iface");
> +		if (IS_ERR(qce->iface)) {
> +			ret = PTR_ERR(qce->iface);
> +			goto err_out;
> +		}
> +
> +		qce->bus = devm_clk_get(qce->dev, "bus");
> +		if (IS_ERR(qce->bus)) {
> +			ret = PTR_ERR(qce->bus);
> +			goto err_out;
> +		}
> +
> +		ret = clk_prepare_enable(qce->core);
> +		if (ret)
> +			goto err_out;
>   
> -	ret = clk_prepare_enable(qce->iface);
> -	if (ret)
> -		goto err_clks_core;
> +		ret = clk_prepare_enable(qce->iface);
> +		if (ret)
> +			goto err_clks_core;
>   
> -	ret = clk_prepare_enable(qce->bus);
> -	if (ret)
> -		goto err_clks_iface;
> +		ret = clk_prepare_enable(qce->bus);
> +		if (ret)
> +			goto err_clks_iface;
> +	}
>   
>   	ret = qce_dma_request(qce->dev, &qce->dma);
>   	if (ret)
> @@ -268,6 +299,7 @@ static int qce_crypto_probe(struct platform_device *pdev)
>   	clk_disable_unprepare(qce->iface);
>   err_clks_core:
>   	clk_disable_unprepare(qce->core);
> +err_out:
>   	return ret;
>   }
>   
> @@ -284,13 +316,6 @@ static int qce_crypto_remove(struct platform_device *pdev)
>   	return 0;
>   }
>   
> -static const struct of_device_id qce_crypto_of_match[] = {
> -	{ .compatible = "qcom,ipq6018-qce", },
> -	{ .compatible = "qcom,sdm845-qce", },
> -	{}
> -};
> -MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
> -
>   static struct platform_driver qce_crypto_driver = {
>   	.probe = qce_crypto_probe,
>   	.remove = qce_crypto_remove,
> diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
> index 228fcd69ec51..d9bf05babecc 100644
> --- a/drivers/crypto/qce/core.h
> +++ b/drivers/crypto/qce/core.h
> @@ -23,6 +23,7 @@
>    * @dma: pointer to dma data
>    * @burst_size: the crypto burst size
>    * @pipe_pair_id: which pipe pair id the device using
> + * @clks_configured_by_fw: clocks are already configured by fw
>    * @async_req_enqueue: invoked by every algorithm to enqueue a request
>    * @async_req_done: invoked by every algorithm to finish its request
>    */
> @@ -39,6 +40,7 @@ struct qce_device {
>   	struct qce_dma_data dma;
>   	int burst_size;
>   	unsigned int pipe_pair_id;
> +	bool clks_configured_by_fw;
>   	int (*async_req_enqueue)(struct qce_device *qce,
>   				 struct crypto_async_request *req);
>   	void (*async_req_done)(struct qce_device *qce, int ret);
>
Bhupesh Sharma June 5, 2021, 8:31 a.m. UTC | #2
Hi Thara

On Fri, 21 May 2021 at 07:41, Thara Gopinath <thara.gopinath@linaro.org> wrote:
>

> Hi Bhupesh,

>

> On 5/19/21 10:36 AM, Bhupesh Sharma wrote:

> > From: Thara Gopinath <thara.gopinath@linaro.org>

> >

> > On certain Snapdragon processors, the crypto engine clocks are enabled by

> > default by security firmware and the driver need not handle the

> > clocks. Make acquiring of all the clocks optional in crypto enginer driver

> > so that the driver intializes properly even if no clocks are specified in

> > the dt.

> >

> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>

> > Cc: Rob Herring <robh+dt@kernel.org>

> > Cc: Andy Gross <agross@kernel.org>

> > Cc: Herbert Xu <herbert@gondor.apana.org.au>

> > Cc: David S. Miller <davem@davemloft.net>

> > Cc: Stephen Boyd <sboyd@kernel.org>

> > Cc: Michael Turquette <mturquette@baylibre.com>

> > Cc: Vinod Koul <vkoul@kernel.org>

> > Cc: dmaengine@vger.kernel.org

> > Cc: linux-clk@vger.kernel.org

> > Cc: linux-crypto@vger.kernel.org

> > Cc: devicetree@vger.kernel.org

> > Cc: linux-kernel@vger.kernel.org

> > Cc: bhupesh.linux@gmail.com

> > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

> > [ bhupesh.sharma@linaro.org: Make clock enablement optional only for qcom parts where

> >    firmware has already initialized them, using a bool variable and fix

> >    error paths ]

> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

> > ---

> >   drivers/crypto/qce/core.c | 89 +++++++++++++++++++++++++--------------

> >   drivers/crypto/qce/core.h |  2 +

> >   2 files changed, 59 insertions(+), 32 deletions(-)

> >

> > diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c

> > index 905378906ac7..8c3c68ba579e 100644

> > --- a/drivers/crypto/qce/core.c

> > +++ b/drivers/crypto/qce/core.c

> > @@ -9,6 +9,7 @@

> >   #include <linux/interrupt.h>

> >   #include <linux/module.h>

> >   #include <linux/mod_devicetable.h>

> > +#include <linux/of_device.h>

> >   #include <linux/platform_device.h>

> >   #include <linux/spinlock.h>

> >   #include <linux/types.h>

> > @@ -184,10 +185,20 @@ static int qce_check_version(struct qce_device *qce)

> >       return 0;

> >   }

> >

> > +static const struct of_device_id qce_crypto_of_match[] = {

> > +     { .compatible = "qcom,ipq6018-qce", },

> > +     { .compatible = "qcom,sdm845-qce", },

> > +     { .compatible = "qcom,sm8250-qce", },

>

> Adding qcom,sm8250-qce does not belong in this patch. It deserves a

> separate patch of it's own.


Ok, I will fix it in v4.

> > +     {}

> > +};

> > +MODULE_DEVICE_TABLE(of, qce_crypto_of_match);

> > +

> >   static int qce_crypto_probe(struct platform_device *pdev)

> >   {

> >       struct device *dev = &pdev->dev;

> >       struct qce_device *qce;

> > +     const struct of_device_id *of_id =

> > +                     of_match_device(qce_crypto_of_match, &pdev->dev);

> >       int ret;

> >

> >       qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);

> > @@ -198,45 +209,65 @@ static int qce_crypto_probe(struct platform_device *pdev)

> >       platform_set_drvdata(pdev, qce);

> >

> >       qce->base = devm_platform_ioremap_resource(pdev, 0);

> > -     if (IS_ERR(qce->base))

> > -             return PTR_ERR(qce->base);

> > +     if (IS_ERR(qce->base)) {

> > +             ret = PTR_ERR(qce->base);

> > +             goto err_out;

> > +     }

>

> I don't see the reason for change in error handling here or below. But

> ,for whatever reason this is changed, it has to be a separate patch.


Ok, I will fix it in v4.

> >       ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));

> >       if (ret < 0)

> > -             return ret;

> > +             goto err_out;

> >

> >       qce->mem_path = devm_of_icc_get(qce->dev, "memory");

> >       if (IS_ERR(qce->mem_path))

> >               return dev_err_probe(dev, PTR_ERR(qce->mem_path),

> >                                    "Failed to get mem path\n");

> >

> > -     qce->core = devm_clk_get(qce->dev, "core");

> > -     if (IS_ERR(qce->core))

> > -             return PTR_ERR(qce->core);

> > -

> > -     qce->iface = devm_clk_get(qce->dev, "iface");

> > -     if (IS_ERR(qce->iface))

> > -             return PTR_ERR(qce->iface);

> > -

> > -     qce->bus = devm_clk_get(qce->dev, "bus");

> > -     if (IS_ERR(qce->bus))

> > -             return PTR_ERR(qce->bus);

> > -

> >       ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);

> >       if (ret)

> > -             return ret;

> > +             goto err_out;

> >

> > -     ret = clk_prepare_enable(qce->core);

> > -     if (ret)

> > -             return ret;

> > +     /* On some qcom parts the crypto clocks are already configured by

> > +      * the firmware running before linux. In such cases we don't need to

> > +      * enable/configure them again. Check here for the same.

> > +      */

> > +     if (!strcmp(of_id->compatible, "qcom,ipq6018-qce") ||

> > +         !strcmp(of_id->compatible, "qcom,sdm845-qce"))

>

> You can avoid this and most of this patch by using

> devm_clk_get_optional. This patch can be like just three lines of code

> change. clk_prepare_enable returns 0 if the clock is null. There is no

> need to check for the compatibles above. Use devm_clk_get_optional

> instead of devm_clk_get and everything else can be left as is.


Ok, I will fix it in v4.

Thanks,
Bhupesh

> Warm Regards

> Thara

>

> > +             qce->clks_configured_by_fw = false;

> > +     else

> > +             qce->clks_configured_by_fw = true;

> > +

> > +     if (!qce->clks_configured_by_fw) {

> > +             qce->core = devm_clk_get(qce->dev, "core");

> > +             if (IS_ERR(qce->core)) {

> > +                     ret = PTR_ERR(qce->core);

> > +                     goto err_out;

> > +             }

> > +

> > +             qce->iface = devm_clk_get(qce->dev, "iface");

> > +             if (IS_ERR(qce->iface)) {

> > +                     ret = PTR_ERR(qce->iface);

> > +                     goto err_out;

> > +             }

> > +

> > +             qce->bus = devm_clk_get(qce->dev, "bus");

> > +             if (IS_ERR(qce->bus)) {

> > +                     ret = PTR_ERR(qce->bus);

> > +                     goto err_out;

> > +             }

> > +

> > +             ret = clk_prepare_enable(qce->core);

> > +             if (ret)

> > +                     goto err_out;

> >

> > -     ret = clk_prepare_enable(qce->iface);

> > -     if (ret)

> > -             goto err_clks_core;

> > +             ret = clk_prepare_enable(qce->iface);

> > +             if (ret)

> > +                     goto err_clks_core;

> >

> > -     ret = clk_prepare_enable(qce->bus);

> > -     if (ret)

> > -             goto err_clks_iface;

> > +             ret = clk_prepare_enable(qce->bus);

> > +             if (ret)

> > +                     goto err_clks_iface;

> > +     }

> >

> >       ret = qce_dma_request(qce->dev, &qce->dma);

> >       if (ret)

> > @@ -268,6 +299,7 @@ static int qce_crypto_probe(struct platform_device *pdev)

> >       clk_disable_unprepare(qce->iface);

> >   err_clks_core:

> >       clk_disable_unprepare(qce->core);

> > +err_out:

> >       return ret;

> >   }

> >

> > @@ -284,13 +316,6 @@ static int qce_crypto_remove(struct platform_device *pdev)

> >       return 0;

> >   }

> >

> > -static const struct of_device_id qce_crypto_of_match[] = {

> > -     { .compatible = "qcom,ipq6018-qce", },

> > -     { .compatible = "qcom,sdm845-qce", },

> > -     {}

> > -};

> > -MODULE_DEVICE_TABLE(of, qce_crypto_of_match);

> > -

> >   static struct platform_driver qce_crypto_driver = {

> >       .probe = qce_crypto_probe,

> >       .remove = qce_crypto_remove,

> > diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h

> > index 228fcd69ec51..d9bf05babecc 100644

> > --- a/drivers/crypto/qce/core.h

> > +++ b/drivers/crypto/qce/core.h

> > @@ -23,6 +23,7 @@

> >    * @dma: pointer to dma data

> >    * @burst_size: the crypto burst size

> >    * @pipe_pair_id: which pipe pair id the device using

> > + * @clks_configured_by_fw: clocks are already configured by fw

> >    * @async_req_enqueue: invoked by every algorithm to enqueue a request

> >    * @async_req_done: invoked by every algorithm to finish its request

> >    */

> > @@ -39,6 +40,7 @@ struct qce_device {

> >       struct qce_dma_data dma;

> >       int burst_size;

> >       unsigned int pipe_pair_id;

> > +     bool clks_configured_by_fw;

> >       int (*async_req_enqueue)(struct qce_device *qce,

> >                                struct crypto_async_request *req);

> >       void (*async_req_done)(struct qce_device *qce, int ret);

> >

>

>
diff mbox series

Patch

diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
index 905378906ac7..8c3c68ba579e 100644
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -9,6 +9,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
@@ -184,10 +185,20 @@  static int qce_check_version(struct qce_device *qce)
 	return 0;
 }
 
+static const struct of_device_id qce_crypto_of_match[] = {
+	{ .compatible = "qcom,ipq6018-qce", },
+	{ .compatible = "qcom,sdm845-qce", },
+	{ .compatible = "qcom,sm8250-qce", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
+
 static int qce_crypto_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qce_device *qce;
+	const struct of_device_id *of_id =
+			of_match_device(qce_crypto_of_match, &pdev->dev);
 	int ret;
 
 	qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);
@@ -198,45 +209,65 @@  static int qce_crypto_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, qce);
 
 	qce->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(qce->base))
-		return PTR_ERR(qce->base);
+	if (IS_ERR(qce->base)) {
+		ret = PTR_ERR(qce->base);
+		goto err_out;
+	}
 
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret < 0)
-		return ret;
+		goto err_out;
 
 	qce->mem_path = devm_of_icc_get(qce->dev, "memory");
 	if (IS_ERR(qce->mem_path))
 		return dev_err_probe(dev, PTR_ERR(qce->mem_path),
 				     "Failed to get mem path\n");
 
-	qce->core = devm_clk_get(qce->dev, "core");
-	if (IS_ERR(qce->core))
-		return PTR_ERR(qce->core);
-
-	qce->iface = devm_clk_get(qce->dev, "iface");
-	if (IS_ERR(qce->iface))
-		return PTR_ERR(qce->iface);
-
-	qce->bus = devm_clk_get(qce->dev, "bus");
-	if (IS_ERR(qce->bus))
-		return PTR_ERR(qce->bus);
-
 	ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);
 	if (ret)
-		return ret;
+		goto err_out;
 
-	ret = clk_prepare_enable(qce->core);
-	if (ret)
-		return ret;
+	/* On some qcom parts the crypto clocks are already configured by
+	 * the firmware running before linux. In such cases we don't need to
+	 * enable/configure them again. Check here for the same.
+	 */
+	if (!strcmp(of_id->compatible, "qcom,ipq6018-qce") ||
+	    !strcmp(of_id->compatible, "qcom,sdm845-qce"))
+		qce->clks_configured_by_fw = false;
+	else
+		qce->clks_configured_by_fw = true;
+
+	if (!qce->clks_configured_by_fw) {
+		qce->core = devm_clk_get(qce->dev, "core");
+		if (IS_ERR(qce->core)) {
+			ret = PTR_ERR(qce->core);
+			goto err_out;
+		}
+
+		qce->iface = devm_clk_get(qce->dev, "iface");
+		if (IS_ERR(qce->iface)) {
+			ret = PTR_ERR(qce->iface);
+			goto err_out;
+		}
+
+		qce->bus = devm_clk_get(qce->dev, "bus");
+		if (IS_ERR(qce->bus)) {
+			ret = PTR_ERR(qce->bus);
+			goto err_out;
+		}
+
+		ret = clk_prepare_enable(qce->core);
+		if (ret)
+			goto err_out;
 
-	ret = clk_prepare_enable(qce->iface);
-	if (ret)
-		goto err_clks_core;
+		ret = clk_prepare_enable(qce->iface);
+		if (ret)
+			goto err_clks_core;
 
-	ret = clk_prepare_enable(qce->bus);
-	if (ret)
-		goto err_clks_iface;
+		ret = clk_prepare_enable(qce->bus);
+		if (ret)
+			goto err_clks_iface;
+	}
 
 	ret = qce_dma_request(qce->dev, &qce->dma);
 	if (ret)
@@ -268,6 +299,7 @@  static int qce_crypto_probe(struct platform_device *pdev)
 	clk_disable_unprepare(qce->iface);
 err_clks_core:
 	clk_disable_unprepare(qce->core);
+err_out:
 	return ret;
 }
 
@@ -284,13 +316,6 @@  static int qce_crypto_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qce_crypto_of_match[] = {
-	{ .compatible = "qcom,ipq6018-qce", },
-	{ .compatible = "qcom,sdm845-qce", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
-
 static struct platform_driver qce_crypto_driver = {
 	.probe = qce_crypto_probe,
 	.remove = qce_crypto_remove,
diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
index 228fcd69ec51..d9bf05babecc 100644
--- a/drivers/crypto/qce/core.h
+++ b/drivers/crypto/qce/core.h
@@ -23,6 +23,7 @@ 
  * @dma: pointer to dma data
  * @burst_size: the crypto burst size
  * @pipe_pair_id: which pipe pair id the device using
+ * @clks_configured_by_fw: clocks are already configured by fw
  * @async_req_enqueue: invoked by every algorithm to enqueue a request
  * @async_req_done: invoked by every algorithm to finish its request
  */
@@ -39,6 +40,7 @@  struct qce_device {
 	struct qce_dma_data dma;
 	int burst_size;
 	unsigned int pipe_pair_id;
+	bool clks_configured_by_fw;
 	int (*async_req_enqueue)(struct qce_device *qce,
 				 struct crypto_async_request *req);
 	void (*async_req_done)(struct qce_device *qce, int ret);