@@ -264,22 +264,17 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
struct hnae3_ae_dev *ae_dev = pci_get_drvdata(priv->ae_handle->pdev);
struct hns3_enet_coalesce *tx_coal = &tqp_vector->tx_group.coal;
struct hns3_enet_coalesce *rx_coal = &tqp_vector->rx_group.coal;
+ struct hns3_enet_coalesce *ptx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *prx_coal = &priv->rx_coal;
- /* initialize the configuration for interrupt coalescing.
- * 1. GL (Interrupt Gap Limiter)
- * 2. RL (Interrupt Rate Limiter)
- * 3. QL (Interrupt Quantity Limiter)
- *
- * Default: enable interrupt coalescing self-adaptive and GL
- */
- tx_coal->adapt_enable = 1;
- rx_coal->adapt_enable = 1;
+ tx_coal->adapt_enable = ptx_coal->adapt_enable;
+ rx_coal->adapt_enable = prx_coal->adapt_enable;
- tx_coal->int_gl = HNS3_INT_GL_50K;
- rx_coal->int_gl = HNS3_INT_GL_50K;
+ tx_coal->int_gl = ptx_coal->int_gl;
+ rx_coal->int_gl = prx_coal->int_gl;
- rx_coal->flow_level = HNS3_FLOW_LOW;
- tx_coal->flow_level = HNS3_FLOW_LOW;
+ rx_coal->flow_level = prx_coal->flow_level;
+ tx_coal->flow_level = ptx_coal->flow_level;
/* device version above V3(include V3), GL can configure 1us
* unit, so uses 1us unit.
@@ -294,8 +289,8 @@ static void hns3_vector_coalesce_init(struct hns3_enet_tqp_vector *tqp_vector,
rx_coal->ql_enable = 1;
tx_coal->int_ql_max = ae_dev->dev_specs.int_ql_max;
rx_coal->int_ql_max = ae_dev->dev_specs.int_ql_max;
- tx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
- rx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ tx_coal->int_ql = ptx_coal->int_ql;
+ rx_coal->int_ql = prx_coal->int_ql;
}
}
@@ -3844,6 +3839,34 @@ static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
return ret;
}
+static void hns3_nic_init_coal_cfg(struct hns3_nic_priv *priv)
+{
+ struct hnae3_ae_dev *ae_dev = pci_get_drvdata(priv->ae_handle->pdev);
+ struct hns3_enet_coalesce *tx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *rx_coal = &priv->rx_coal;
+
+ /* initialize the configuration for interrupt coalescing.
+ * 1. GL (Interrupt Gap Limiter)
+ * 2. RL (Interrupt Rate Limiter)
+ * 3. QL (Interrupt Quantity Limiter)
+ *
+ * Default: enable interrupt coalescing self-adaptive and GL
+ */
+ tx_coal->adapt_enable = 1;
+ rx_coal->adapt_enable = 1;
+
+ tx_coal->int_gl = HNS3_INT_GL_50K;
+ rx_coal->int_gl = HNS3_INT_GL_50K;
+
+ rx_coal->flow_level = HNS3_FLOW_LOW;
+ tx_coal->flow_level = HNS3_FLOW_LOW;
+
+ if (ae_dev->dev_specs.int_ql_max) {
+ tx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ rx_coal->int_ql = HNS3_INT_QL_DEFAULT_CFG;
+ }
+}
+
static int hns3_nic_alloc_vector_data(struct hns3_nic_priv *priv)
{
struct hnae3_handle *h = priv->ae_handle;
@@ -4295,6 +4318,8 @@ static int hns3_client_init(struct hnae3_handle *handle)
goto out_get_ring_cfg;
}
+ hns3_nic_init_coal_cfg(priv);
+
ret = hns3_nic_alloc_vector_data(priv);
if (ret) {
ret = -ENOMEM;
@@ -4571,31 +4596,6 @@ int hns3_nic_reset_all_ring(struct hnae3_handle *h)
return 0;
}
-static void hns3_store_coal(struct hns3_nic_priv *priv)
-{
- /* ethtool only support setting and querying one coal
- * configuration for now, so save the vector 0' coal
- * configuration here in order to restore it.
- */
- memcpy(&priv->tx_coal, &priv->tqp_vector[0].tx_group.coal,
- sizeof(struct hns3_enet_coalesce));
- memcpy(&priv->rx_coal, &priv->tqp_vector[0].rx_group.coal,
- sizeof(struct hns3_enet_coalesce));
-}
-
-static void hns3_restore_coal(struct hns3_nic_priv *priv)
-{
- u16 vector_num = priv->vector_num;
- int i;
-
- for (i = 0; i < vector_num; i++) {
- memcpy(&priv->tqp_vector[i].tx_group.coal, &priv->tx_coal,
- sizeof(struct hns3_enet_coalesce));
- memcpy(&priv->tqp_vector[i].rx_group.coal, &priv->rx_coal,
- sizeof(struct hns3_enet_coalesce));
- }
-}
-
static int hns3_reset_notify_down_enet(struct hnae3_handle *handle)
{
struct hnae3_knic_private_info *kinfo = &handle->kinfo;
@@ -4654,8 +4654,6 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
if (ret)
goto err_put_ring;
- hns3_restore_coal(priv);
-
ret = hns3_nic_init_vector_data(priv);
if (ret)
goto err_dealloc_vector;
@@ -4721,8 +4719,6 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
hns3_nic_uninit_vector_data(priv);
- hns3_store_coal(priv);
-
hns3_nic_dealloc_vector_data(priv);
hns3_uninit_all_ring(priv);
@@ -1134,50 +1134,32 @@ static void hns3_get_channels(struct net_device *netdev,
h->ae_algo->ops->get_channels(h, ch);
}
-static int hns3_get_coalesce_per_queue(struct net_device *netdev, u32 queue,
- struct ethtool_coalesce *cmd)
+static int hns3_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *cmd)
{
- struct hns3_enet_tqp_vector *tx_vector, *rx_vector;
struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hns3_enet_coalesce *tx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *rx_coal = &priv->rx_coal;
struct hnae3_handle *h = priv->ae_handle;
- u16 queue_num = h->kinfo.num_tqps;
if (hns3_nic_resetting(netdev))
return -EBUSY;
- if (queue >= queue_num) {
- netdev_err(netdev,
- "Invalid queue value %u! Queue max id=%u\n",
- queue, queue_num - 1);
- return -EINVAL;
- }
-
- tx_vector = priv->ring[queue].tqp_vector;
- rx_vector = priv->ring[queue_num + queue].tqp_vector;
+ cmd->use_adaptive_tx_coalesce = tx_coal->adapt_enable;
+ cmd->use_adaptive_rx_coalesce = rx_coal->adapt_enable;
- cmd->use_adaptive_tx_coalesce =
- tx_vector->tx_group.coal.adapt_enable;
- cmd->use_adaptive_rx_coalesce =
- rx_vector->rx_group.coal.adapt_enable;
-
- cmd->tx_coalesce_usecs = tx_vector->tx_group.coal.int_gl;
- cmd->rx_coalesce_usecs = rx_vector->rx_group.coal.int_gl;
+ cmd->tx_coalesce_usecs = tx_coal->int_gl;
+ cmd->rx_coalesce_usecs = rx_coal->int_gl;
cmd->tx_coalesce_usecs_high = h->kinfo.int_rl_setting;
cmd->rx_coalesce_usecs_high = h->kinfo.int_rl_setting;
- cmd->tx_max_coalesced_frames = tx_vector->tx_group.coal.int_ql;
- cmd->rx_max_coalesced_frames = rx_vector->rx_group.coal.int_ql;
+ cmd->tx_max_coalesced_frames = tx_coal->int_ql;
+ cmd->rx_max_coalesced_frames = rx_coal->int_ql;
return 0;
}
-static int hns3_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *cmd)
-{
- return hns3_get_coalesce_per_queue(netdev, 0, cmd);
-}
-
static int hns3_check_gl_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
@@ -1292,19 +1274,7 @@ static int hns3_check_coalesce_para(struct net_device *netdev,
return ret;
}
- ret = hns3_check_ql_coalesce_param(netdev, cmd);
- if (ret)
- return ret;
-
- if (cmd->use_adaptive_tx_coalesce == 1 ||
- cmd->use_adaptive_rx_coalesce == 1) {
- netdev_info(netdev,
- "adaptive-tx=%u and adaptive-rx=%u, tx_usecs or rx_usecs will changed dynamically.\n",
- cmd->use_adaptive_tx_coalesce,
- cmd->use_adaptive_rx_coalesce);
- }
-
- return 0;
+ return hns3_check_ql_coalesce_param(netdev, cmd);
}
static void hns3_set_coalesce_per_queue(struct net_device *netdev,
@@ -1350,6 +1320,9 @@ static int hns3_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
struct hnae3_handle *h = hns3_get_handle(netdev);
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hns3_enet_coalesce *tx_coal = &priv->tx_coal;
+ struct hns3_enet_coalesce *rx_coal = &priv->rx_coal;
u16 queue_num = h->kinfo.num_tqps;
int ret;
int i;
@@ -1364,6 +1337,15 @@ static int hns3_set_coalesce(struct net_device *netdev,
h->kinfo.int_rl_setting =
hns3_rl_round_down(cmd->rx_coalesce_usecs_high);
+ tx_coal->adapt_enable = cmd->use_adaptive_tx_coalesce;
+ rx_coal->adapt_enable = cmd->use_adaptive_rx_coalesce;
+
+ tx_coal->int_gl = cmd->tx_coalesce_usecs;
+ rx_coal->int_gl = cmd->rx_coalesce_usecs;
+
+ tx_coal->int_ql = cmd->tx_max_coalesced_frames;
+ rx_coal->int_ql = cmd->rx_max_coalesced_frames;
+
for (i = 0; i < queue_num; i++)
hns3_set_coalesce_per_queue(netdev, cmd, i);
Currently, when adaptive is on, the user's coalesce configuration may be overwritten by the dynamic one. The reason is that user's configurations are saved in struct hns3_enet_tqp_vector whose value maybe changed by the dynamic algorithm. To fix it, use struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to save and get the user's configuration. BTW, operations of storing and restoring coalesce info in the reset process are unnecessary now, so remove them as well. Fixes: 434776a5fae2 ("net: hns3: add ethtool_ops.set_coalesce support to PF") Fixes: 7e96adc46633 ("net: hns3: add ethtool_ops.get_coalesce support to PF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 84 +++++++++++----------- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 64 ++++++----------- 2 files changed, 63 insertions(+), 85 deletions(-)