@@ -216,6 +216,10 @@
};
};
+&adm_dma {
+ status = "okay";
+};
+
&gmac0 {
status = "okay";
@@ -251,6 +255,39 @@
status = "okay";
};
+&hs_phy_1 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "qcom,nandcs";
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "RouterBoard NAND 1 Boot";
+ reg = <0x0000000 0x0800000>;
+ };
+
+ main@800000 {
+ label = "RouterBoard NAND 1 Main";
+ reg = <0x0800000 0x7800000>;
+ };
+ };
+ };
+};
+
&qcom_pinmux {
buttons_pins: buttons_pins {
mux {
@@ -305,4 +342,25 @@
input-disable;
};
};
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&ss_phy_1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
Enable the NAND + USB devices for the MikroTik RB3011 platform now they're in the main IPQ806x DT. Signed-off-by: Jonathan McDowell <noodles@earth.li> --- arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 58 +++++++++++++++++++++++ 1 file changed, 58 insertions(+)