diff mbox series

[4.19,170/425] serial: stm32: fix tx_empty condition

Message ID 20210520092137.033957589@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH May 20, 2021, 9:18 a.m. UTC
From: Erwan Le Ray <erwan.leray@foss.st.com>

[ Upstream commit 3db1d52466dc11dca4e47ef12a6e6e97f846af62 ]

In "tx_empty", we should poll TC bit in both DMA and PIO modes (instead of
TXE) to check transmission data register has been transmitted independently
of the FIFO mode. TC indicates that both transmit register and shift
register are empty. When shift register is empty, tx_empty should return
TIOCSER_TEMT instead of TC value.

Cleans the USART_CR_TC TCCF register define (transmission complete clear
flag) as it is duplicate of USART_ICR_TCCF.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-13-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/stm32-usart.c | 5 ++++-
 drivers/tty/serial/stm32-usart.h | 3 ---
 2 files changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 09cecd34d13e..50073ead5881 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -472,7 +472,10 @@  static unsigned int stm32_tx_empty(struct uart_port *port)
 	struct stm32_port *stm32_port = to_stm32_port(port);
 	struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 
-	return readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE;
+	if (readl_relaxed(port->membase + ofs->isr) & USART_SR_TC)
+		return TIOCSER_TEMT;
+
+	return 0;
 }
 
 static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 30d2433e27c3..00daee7f83ee 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -123,9 +123,6 @@  struct stm32_usart_info stm32h7_info = {
 /* Dummy bits */
 #define USART_SR_DUMMY_RX	BIT(16)
 
-/* USART_ICR (F7) */
-#define USART_CR_TC		BIT(6)
-
 /* USART_DR */
 #define USART_DR_MASK		GENMASK(8, 0)