new file mode 100644
@@ -0,0 +1,6 @@
+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
new file mode 100644
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clkl {
+ compatible = "fsl,imx6q-clkl", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clkh {
+ compatible = "fsl,imx6q-clkh", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx6q-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ aips-bus@02100000 { /* AIPS2 */
+ enet@02188000 {
+ phy-mode = "rgmii";
+ local-mac-address = [00 04 9F 01 1B 61];
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+ wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+ status = "okay";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart3: uart@021f0000 { /* UART4 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 25 0>; /* GPIO3_25 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,555 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer@00a00600 {
+ compatible = "arm,smp-twd";
+ reg = <0x00a00600 0x100>;
+ interrupts = <1 13 0xf4>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips-bus@02000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif@02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi@02008000 { /* eCSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@0200c000 { /* eCSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02010000 { /* eCSPI3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02014000 { /* eCSPI4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02018000 { /* eCSPI5 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 35 0x04>;
+ status = "disabled";
+ };
+
+ uart0: uart@02020000 { /* UART1 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ status = "disabled";
+ };
+
+ esai@02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ };
+
+ ssi@02028000 { /* SSI1 */
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ };
+
+ ssi@0202c000 { /* SSI2 */
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ };
+
+ ssi@02030000 { /* SSI3 */
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ };
+
+ asrc@02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 0x04>;
+ };
+
+ spba@0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ interrupts = <0 3 0x04 0 12 0x04>;
+ };
+
+ aipstz@0207c000 { /* AIPSTZ1 */
+ reg = <0x0207c000 0x4000>;
+ };
+
+ pwm@02080000 { /* PWM1 */
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ };
+
+ pwm@02084000 { /* PWM2 */
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ };
+
+ pwm@02088000 { /* PWM3 */
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ };
+
+ pwm@0208c000 { /* PWM4 */
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ };
+
+ flexcan@02090000 { /* CAN1 */
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 0x04>;
+ };
+
+ flexcan@02094000 { /* CAN2 */
+ reg = <0x02094000 0x4000>;
+ interrupts = <0 111 0x04>;
+ };
+
+ gpt@02098000 {
+ compatible = "fsl,imx6q-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ };
+
+ gpio0: gpio@0209c000 { /* GPIO1 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@020a0000 { /* GPIO2 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@020a4000 { /* GPIO3 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@020a8000 { /* GPIO4 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@020ac000 { /* GPIO5 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@020b0000 { /* GPIO6 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <0 76 0x04 0 77 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@020b4000 { /* GPIO7 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <0 78 0x04 0 79 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ kpp@020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog@020bc000 { /* WDOG1 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ status = "disabled";
+ };
+
+ wdog@020c0000 { /* WDOG2 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ status = "disabled";
+ };
+
+ ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ };
+
+ anatop@020c8000 {
+ compatible = "fsl,imx6q-anatop";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ };
+
+ usbphy@020c9000 { /* USBPHY1 */
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ };
+
+ usbphy@020ca000 { /* USBPHY2 */
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ };
+
+ snvs@020cc000 {
+ reg = <0x020cc000 0x4000>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+
+ epit@020d0000 { /* EPIT1 */
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit@020d4000 { /* EPIT2 */
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src@020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ };
+
+ gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04 0 90 0x04>;
+ };
+
+ iomuxc@020e0000 {
+ reg = <0x020e0000 0x4000>;
+ };
+
+ dcic@020e4000 { /* DCIC1 */
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 124 0x04>;
+ };
+
+ dcic@020e8000 { /* DCIC2 */
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 125 0x04>;
+ };
+
+ sdma@020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ caam@02100000 {
+ reg = <0x02100000 0x40000>;
+ interrupts = <0 105 0x04 0 106 0x04>;
+ };
+
+ aipstz@0217c000 { /* AIPSTZ2 */
+ reg = <0x0217c000 0x4000>;
+ };
+
+ enet@02188000 {
+ compatible = "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ status = "disabled";
+ };
+
+ mlb@0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ };
+
+ usdhc@02190000 { /* uSDHC1 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@02194000 { /* uSDHC2 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a0000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a8000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ status = "disabled";
+ };
+
+ romcp@021ac000 {
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc@021b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ mmdc@021b4000 { /* MMDC1 */
+ reg = <0x021b4000 0x4000>;
+ };
+
+ weim@021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp@021bc000 {
+ reg = <0x021bc000 0x4000>;
+ };
+
+ ocotp@021c0000 {
+ reg = <0x021c0000 0x4000>;
+ interrupts = <0 21 0x04>;
+ };
+
+ tzasc@021d0000 { /* TZASC1 */
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ tzasc@021d4000 { /* TZASC2 */
+ reg = <0x021d4000 0x4000>;
+ interrupts = <0 109 0x04>;
+ };
+
+ audmux@021d8000 {
+ reg = <0x021d8000 0x4000>;
+ };
+
+ mipi@021dc000 { /* MIPI-CSI */
+ reg = <0x021dc000 0x4000>;
+ };
+
+ mipi@021e0000 { /* MIPI-DSI */
+ reg = <0x021e0000 0x4000>;
+ };
+
+ vdoa@021e4000 {
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 0x04>;
+ };
+
+ uart1: uart@021e8000 { /* UART2 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ status = "disabled";
+ };
+
+ uart2: uart@021ec000 { /* UART3 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <0 28 0x04>;
+ status = "disabled";
+ };
+
+ uart3: uart@021f0000 { /* UART4 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <0 29 0x04>;
+ status = "disabled";
+ };
+
+ uart4: uart@021f4000 { /* UART5 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <0 30 0x04>;
+ status = "disabled";
+ };
+ };
+ };
+};
It adds device tree source and documentation for imx6q platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- Documentation/devicetree/bindings/arm/fsl.txt | 6 + arch/arm/boot/dts/imx6q-sabreauto.dts | 82 ++++ arch/arm/boot/dts/imx6q.dtsi | 555 +++++++++++++++++++++++++ 3 files changed, 643 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/fsl.txt create mode 100644 arch/arm/boot/dts/imx6q-sabreauto.dts create mode 100644 arch/arm/boot/dts/imx6q.dtsi