@@ -43,6 +43,9 @@ struct mdp5_crtc {
/* for unref'ing cursor bo's after scanout completes: */
struct drm_flip_work unref_cursor_work;
+ /* for lowering down the bandwidth after previous frame is complete */
+ struct drm_flip_work lower_bw_work;
+
struct mdp_irq vblank;
struct mdp_irq err;
struct mdp_irq pp_done;
@@ -171,12 +174,28 @@ static void unref_cursor_worker(struct drm_flip_work *work, void *val)
drm_gem_object_put(val);
}
+static void lower_bw_worker(struct drm_flip_work *work, void *val)
+{
+ struct mdp5_crtc *mdp5_crtc =
+ container_of(work, struct mdp5_crtc, lower_bw_work);
+ struct drm_crtc *crtc = &mdp5_crtc->base;
+ struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc->state);
+ struct mdp5_kms *mdp5_kms = get_kms(&mdp5_crtc->base);
+
+ if (mdp5_cstate->old_crtc_bw > mdp5_cstate->new_crtc_bw) {
+ DBG("DOWN BW to %lld\n", mdp5_cstate->new_crtc_bw);
+ mdp5_kms_set_bandwidth(mdp5_kms);
+ mdp5_cstate->old_crtc_bw = mdp5_cstate->new_crtc_bw;
+ }
+}
+
static void mdp5_crtc_destroy(struct drm_crtc *crtc)
{
struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
drm_crtc_cleanup(crtc);
drm_flip_work_cleanup(&mdp5_crtc->unref_cursor_work);
+ drm_flip_work_cleanup(&mdp5_crtc->lower_bw_work);
kfree(mdp5_crtc);
}
@@ -691,6 +710,7 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state,
crtc);
struct mdp5_kms *mdp5_kms = get_kms(crtc);
+ struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc_state);
struct drm_plane *plane;
struct drm_device *dev = crtc->dev;
struct plane_state pstates[STAGE_MAX + 1];
@@ -701,6 +721,7 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
bool need_right_mixer = false;
int cnt = 0, i;
int ret;
+ u64 crtc_bw = 0;
enum mdp_mixer_stage_id start;
DBG("%s: check", crtc->name);
@@ -718,6 +739,9 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
*/
if (pstates[cnt].state->r_hwpipe)
need_right_mixer = true;
+
+ crtc_bw += pstates[cnt].state->plane_bw;
+
cnt++;
if (plane->type == DRM_PLANE_TYPE_CURSOR)
@@ -730,6 +754,10 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc,
hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
+ if (hw_cfg->perf.ab_inefficiency)
+ crtc_bw = mult_frac(crtc_bw, hw_cfg->perf.ab_inefficiency, 100);
+ mdp5_cstate->new_crtc_bw = crtc_bw;
+
/*
* we need a right hwmixer if the mode's width is greater than a single
* LM's max width
@@ -785,6 +813,7 @@ static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc,
{
struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc->state);
+ struct mdp5_kms *mdp5_kms = get_kms(crtc);
struct drm_device *dev = crtc->dev;
unsigned long flags;
@@ -808,6 +837,12 @@ static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc,
blend_setup(crtc);
+ if (mdp5_cstate->old_crtc_bw < mdp5_cstate->new_crtc_bw) {
+ DBG("UP BW to %lld\n", mdp5_cstate->new_crtc_bw);
+ mdp5_kms_set_bandwidth(mdp5_kms);
+ mdp5_cstate->old_crtc_bw = mdp5_cstate->new_crtc_bw;
+ }
+
/* PP_DONE irq is only used by command mode for now.
* It is better to request pending before FLUSH and START trigger
* to make sure no pp_done irq missed.
@@ -1155,6 +1190,7 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus)
{
struct mdp5_crtc *mdp5_crtc = container_of(irq, struct mdp5_crtc, vblank);
struct drm_crtc *crtc = &mdp5_crtc->base;
+ struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc->state);
struct msm_drm_private *priv = crtc->dev->dev_private;
unsigned pending;
@@ -1162,6 +1198,11 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus)
pending = atomic_xchg(&mdp5_crtc->pending, 0);
+ if (mdp5_cstate->old_crtc_bw > mdp5_cstate->new_crtc_bw) {
+ drm_flip_work_queue(&mdp5_crtc->lower_bw_work, NULL);
+ drm_flip_work_commit(&mdp5_crtc->lower_bw_work, priv->wq);
+ }
+
if (pending & PENDING_FLIP) {
complete_flip(crtc, NULL);
}
@@ -1318,6 +1359,9 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
drm_flip_work_init(&mdp5_crtc->unref_cursor_work,
"unref cursor", unref_cursor_worker);
+ drm_flip_work_init(&mdp5_crtc->lower_bw_work,
+ "lower bw", lower_bw_worker);
+
drm_crtc_helper_add(crtc, &mdp5_crtc_helper_funcs);
return crtc;
@@ -19,6 +19,8 @@
#include "msm_mmu.h"
#include "mdp5_kms.h"
+#define MDP5_DEFAULT_BW MBps_to_icc(6400)
+
static int mdp5_hw_init(struct msm_kms *kms)
{
struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(kms));
@@ -296,6 +298,28 @@ static const struct mdp_kms_funcs kms_funcs = {
.set_irqmask = mdp5_set_irqmask,
};
+void mdp5_kms_set_bandwidth(struct mdp5_kms *mdp5_kms)
+{
+ int i;
+ u32 full_bw = 0;
+ struct drm_crtc *tmp_crtc;
+
+ if (!mdp5_kms->num_paths)
+ return;
+
+ drm_for_each_crtc(tmp_crtc, mdp5_kms->dev) {
+ if (!tmp_crtc->enabled)
+ continue;
+
+ full_bw += Bps_to_icc(to_mdp5_crtc_state(tmp_crtc->state)->new_crtc_bw / mdp5_kms->num_paths);
+ }
+
+ DBG("SET BW to %d\n", full_bw);
+
+ for (i = 0; i < mdp5_kms->num_paths; i++)
+ icc_set_bw(mdp5_kms->paths[i], full_bw, full_bw);
+}
+
static int mdp5_disable(struct mdp5_kms *mdp5_kms)
{
DBG("");
@@ -313,6 +337,14 @@ static int mdp5_disable(struct mdp5_kms *mdp5_kms)
if (mdp5_kms->lut_clk)
clk_disable_unprepare(mdp5_kms->lut_clk);
+ if (!mdp5_kms->enable_count) {
+ int i;
+
+ for (i = 0; i < mdp5_kms->num_paths; i++)
+ icc_set_bw(mdp5_kms->paths[i], 0, 0);
+ icc_set_bw(mdp5_kms->path_rot, 0, 0);
+ }
+
return 0;
}
@@ -322,6 +354,14 @@ static int mdp5_enable(struct mdp5_kms *mdp5_kms)
mdp5_kms->enable_count++;
+ if (mdp5_kms->enable_count == 1) {
+ int i;
+
+ for (i = 0; i < mdp5_kms->num_paths; i++)
+ icc_set_bw(mdp5_kms->paths[i], 0, MDP5_DEFAULT_BW);
+ icc_set_bw(mdp5_kms->path_rot, 0, MDP5_DEFAULT_BW);
+ }
+
clk_prepare_enable(mdp5_kms->ahb_clk);
clk_prepare_enable(mdp5_kms->axi_clk);
clk_prepare_enable(mdp5_kms->core_clk);
@@ -828,6 +868,40 @@ static int interface_init(struct mdp5_kms *mdp5_kms)
return 0;
}
+static int mdp5_setup_interconnect(struct mdp5_kms *mdp5_kms)
+{
+ struct icc_path *path0 = of_icc_get(&mdp5_kms->pdev->dev, "mdp0-mem");
+ struct icc_path *path1 = of_icc_get(&mdp5_kms->pdev->dev, "mdp1-mem");
+ struct icc_path *path_rot = of_icc_get(&mdp5_kms->pdev->dev, "rotator-mem");
+
+ if (IS_ERR(path0))
+ return PTR_ERR(path0);
+
+ if (!path0) {
+ /* no interconnect support is not necessarily a fatal
+ * condition, the platform may simply not have an
+ * interconnect driver yet. But warn about it in case
+ * bootloader didn't setup bus clocks high enough for
+ * scanout.
+ */
+ dev_warn(&mdp5_kms->pdev->dev, "No interconnect support may cause display underflows!\n");
+ return 0;
+ }
+
+ mdp5_kms->paths[0] = path0;
+ mdp5_kms->num_paths = 1;
+
+ if (!IS_ERR_OR_NULL(path1)) {
+ mdp5_kms->paths[1] = path1;
+ mdp5_kms->num_paths++;
+ }
+
+ if (!IS_ERR_OR_NULL(path_rot))
+ mdp5_kms->path_rot = path_rot;
+
+ return 0;
+}
+
static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
@@ -835,6 +909,7 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
struct mdp5_cfg *config;
u32 major, minor;
int ret;
+ int i;
mdp5_kms = devm_kzalloc(&pdev->dev, sizeof(*mdp5_kms), GFP_KERNEL);
if (!mdp5_kms) {
@@ -859,6 +934,14 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev)
goto fail;
}
+ ret = mdp5_setup_interconnect(mdp5_kms);
+ if (ret)
+ goto fail;
+
+ for (i = 0; i < mdp5_kms->num_paths; i++)
+ icc_set_bw(mdp5_kms->paths[i], 0, MDP5_DEFAULT_BW);
+ icc_set_bw(mdp5_kms->path_rot, 0, MDP5_DEFAULT_BW);
+
/* mandatory clocks: */
ret = get_clk(pdev, &mdp5_kms->axi_clk, "bus", true);
if (ret)
@@ -968,46 +1051,10 @@ static const struct component_ops mdp5_ops = {
.unbind = mdp5_unbind,
};
-static int mdp5_setup_interconnect(struct platform_device *pdev)
-{
- struct icc_path *path0 = of_icc_get(&pdev->dev, "mdp0-mem");
- struct icc_path *path1 = of_icc_get(&pdev->dev, "mdp1-mem");
- struct icc_path *path_rot = of_icc_get(&pdev->dev, "rotator-mem");
-
- if (IS_ERR(path0))
- return PTR_ERR(path0);
-
- if (!path0) {
- /* no interconnect support is not necessarily a fatal
- * condition, the platform may simply not have an
- * interconnect driver yet. But warn about it in case
- * bootloader didn't setup bus clocks high enough for
- * scanout.
- */
- dev_warn(&pdev->dev, "No interconnect support may cause display underflows!\n");
- return 0;
- }
-
- icc_set_bw(path0, 0, MBps_to_icc(6400));
-
- if (!IS_ERR_OR_NULL(path1))
- icc_set_bw(path1, 0, MBps_to_icc(6400));
- if (!IS_ERR_OR_NULL(path_rot))
- icc_set_bw(path_rot, 0, MBps_to_icc(6400));
-
- return 0;
-}
-
static int mdp5_dev_probe(struct platform_device *pdev)
{
- int ret;
-
DBG("");
- ret = mdp5_setup_interconnect(pdev);
- if (ret)
- return ret;
-
return component_add(&pdev->dev, &mdp5_ops);
}
@@ -17,6 +17,7 @@
#include "mdp5_ctl.h"
#include "mdp5_smp.h"
+struct icc_path;
struct mdp5_kms {
struct mdp_kms base;
@@ -68,6 +69,10 @@ struct mdp5_kms {
struct mdp_irq error_handler;
int enable_count;
+
+ int num_paths;
+ struct icc_path *paths[2];
+ struct icc_path *path_rot;
};
#define to_mdp5_kms(x) container_of(x, struct mdp5_kms, base)
@@ -100,6 +105,8 @@ struct mdp5_plane_state {
/* assigned by crtc blender */
enum mdp_mixer_stage_id stage;
+
+ u64 plane_bw;
};
#define to_mdp5_plane_state(x) \
container_of(x, struct mdp5_plane_state, base)
@@ -130,6 +137,9 @@ struct mdp5_crtc_state {
* writing CTL[n].START until encoder->enable()
*/
bool defer_start;
+
+ u64 new_crtc_bw;
+ u64 old_crtc_bw;
};
#define to_mdp5_crtc_state(x) \
container_of(x, struct mdp5_crtc_state, base)
@@ -292,6 +302,8 @@ void mdp5_encoder_set_intf_mode(struct drm_encoder *encoder, bool cmd_mode);
int mdp5_encoder_get_linecount(struct drm_encoder *encoder);
u32 mdp5_encoder_get_framecount(struct drm_encoder *encoder);
+void mdp5_kms_set_bandwidth(struct mdp5_kms *mdp5_kms);
+
#ifdef CONFIG_DRM_MSM_DSI
void mdp5_cmd_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
@@ -154,6 +154,46 @@ static void mdp5_plane_cleanup_fb(struct drm_plane *plane,
msm_framebuffer_cleanup(fb, kms->aspace);
}
+/* based on _dpu_plane_calc_bw */
+static void mdp5_plane_calc_bw(struct drm_plane_state *state, struct drm_crtc_state *crtc_state)
+{
+ struct drm_framebuffer *fb = state->fb;
+ struct mdp5_plane_state *pstate = to_mdp5_plane_state(state);
+ struct drm_display_mode *mode = &crtc_state->mode;
+ int bpp;
+ int src_width, src_height, dst_height, fps;
+ u64 plane_bw;
+ u32 hw_latency_lines;
+ u32 prefill_div;
+ u64 scale_factor;
+ int vbp, vpw, vfp;
+
+ src_width = drm_rect_width(&state->src) >> 16;
+ src_height = drm_rect_height(&state->src) >> 16;
+ dst_height = drm_rect_height(&state->dst);
+ fps = drm_mode_vrefresh(mode);
+ vbp = mode->vtotal - mode->vsync_end;
+ vpw = mode->vsync_end - mode->vsync_start;
+ vfp = mode->vsync_start - mode->vdisplay;
+ scale_factor = src_height > dst_height ?
+ mult_frac(src_height, 1, dst_height) : 1;
+
+ bpp = to_mdp_format(msm_framebuffer_format(fb))->cpp;
+
+ plane_bw = src_width * mode->vtotal * fps * bpp * scale_factor;
+
+ hw_latency_lines = 21; /* or 24? */
+ prefill_div = hw_latency_lines;
+ if (vbp + vpw > hw_latency_lines)
+ prefill_div = vbp + vpw;
+#if 0
+ else if (vbp + vpw + vfp < hw_latency_lines)
+ prefill_div = vbp + vpw + vfp;
+#endif
+
+ pstate->plane_bw = max(plane_bw, mult_frac(plane_bw, hw_latency_lines, prefill_div));
+}
+
static int mdp5_plane_atomic_check_with_state(struct drm_crtc_state *crtc_state,
struct drm_plane_state *state)
{
@@ -297,6 +337,8 @@ static int mdp5_plane_atomic_check_with_state(struct drm_crtc_state *crtc_state,
mdp5_pipe_release(state->state, old_hwpipe);
mdp5_pipe_release(state->state, old_right_hwpipe);
}
+
+ mdp5_plane_calc_bw(state, crtc_state);
} else {
mdp5_pipe_release(state->state, mdp5_state->hwpipe);
mdp5_pipe_release(state->state, mdp5_state->r_hwpipe);
Instead of using static bandwidth setup, manage bandwidth dynamically, depending on the amount of allocated planes, their format and resolution. Co-developed-with: James Willcox <jwillcox@squareup.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 44 ++++++++ drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 119 ++++++++++++++------- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.h | 12 +++ drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 42 ++++++++ 4 files changed, 181 insertions(+), 36 deletions(-) -- 2.30.2