diff mbox series

[V5,07/11] arm64: dts: qcom: pmk8350: Add peripherals for pmk8350

Message ID 1621937466-1502-8-git-send-email-skakit@codeaurora.org
State Accepted
Commit b2de4313605834cb9d50baa3901b2c1956092ca1
Headers show
Series Add PMIC DT files for sc7280 | expand

Commit Message

Satya Priya May 25, 2021, 10:11 a.m. UTC 
Add PON, RTC, VADC and ACD_TM support for PMK8350.

Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in RESEND V4:
 - No Changes.

Changes in V5:
 - Split this patch into two. One for adding pmk8350 peripherals and
   next one to correct GPIO node.

 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1530b8f..ecd5ccd 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -3,6 +3,8 @@ 
  * Copyright (c) 2021, Linaro Limited
  */
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
@@ -13,6 +15,52 @@ 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmk8350_pon: pon@1300 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x1300>;
+
+			pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+			};
+
+			resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+
+		pmk8350_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eoc-int-en-set";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+		};
+
+		pmk8350_adc_tm: adc-tm@3400 {
+			compatible = "qcom,adc-tm7";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "threshold";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8350_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pmk8350_gpios: gpio@b000 {
 			compatible = "qcom,pmk8350-gpio";
 			reg = <0xb000>;