diff mbox series

[2/2] ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes

Message ID 20210526115956.3065-2-vigneshr@ti.com
State New
Headers show
Series None | expand

Commit Message

Vignesh Raghavendra May 26, 2021, 11:59 a.m. UTC 
ti,omap2-uart was kept around to work with legacy omap-serial driver.
Now that we have completed move to 8250-omap.c drop legacy compatible.
This will simplify writing YAML schema.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
 arch/arm/boot/dts/am437x-l4.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e217ffc09770..d4daf2f84de9 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -194,7 +194,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x9000 0x1000>;
 
 			uart0: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -712,7 +712,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -740,7 +740,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1399,7 +1399,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0xa6000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1427,7 +1427,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0xa8000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1455,7 +1455,7 @@  SYSC_OMAP2_SOFTRESET |
 			ranges = <0x0 0xaa000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";