From patchwork Tue May 25 10:15:29 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 448674 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CD2E6C47087 for ; Tue, 25 May 2021 10:15:44 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A541761417 for ; Tue, 25 May 2021 10:15:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231127AbhEYKRM (ORCPT ); Tue, 25 May 2021 06:17:12 -0400 Received: from mail-lf1-f43.google.com ([209.85.167.43]:44014 "EHLO mail-lf1-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230480AbhEYKRJ (ORCPT ); Tue, 25 May 2021 06:17:09 -0400 Received: by mail-lf1-f43.google.com with SMTP id i22so45010690lfl.10; Tue, 25 May 2021 03:15:37 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=seZUu0kly7qUQY9D4WEj572AA9PWt5Avbkieq9/ZXZc=; b=cn7d7sc01tkIaW7uxAq0pYM0GjK+nhQ1eDTn3QnZ1HID9fLBD4a67QXCdwby65bMjn IlgShg/vtMLoq9q2lPgNsyoIN10IEnd7mYg5YjPSd/hXDS70vqPpql+UNYIV8RLPLCKE 3m8YWGo72BQCUgvuA3nzi7mUzWAOUf4vfaAEBcM0VTRaUgvw6sIg2rGQYQkz5ZozWqyZ fmPlfi7jAmcQJJdgzQidORkfoqF2ZFJEcpWKbE/BEAYbfNCdKk5aAwtk3TB+arPLLX44 GtlaVDuS2tRGA7Qx7/6QXkf6UQ/33KEl/Q6UirYh/l8g4/uEA/M9qOCXz1IL97qp8Oj6 OJNA== X-Gm-Message-State: AOAM531ozdH8QsxQm1R+AjRHKzzJ6GbxIP+1lZqJTD1RdUJMRqRMITnO caqnBjOdLUpwvOCqV0vKam+VTVCoerA= X-Google-Smtp-Source: ABdhPJx+qpJC2nnOjZ73A+e3qxugGIF5D53AQJ6Hrzv34fBPhixap0lgJUeCTQBdMurQMf3KZG9IFQ== X-Received: by 2002:a05:6512:3287:: with SMTP id p7mr13789924lfe.394.1621937736341; Tue, 25 May 2021 03:15:36 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyycy-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::4]) by smtp.gmail.com with ESMTPSA id z21sm2041357ljh.122.2021.05.25.03.15.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 25 May 2021 03:15:35 -0700 (PDT) Date: Tue, 25 May 2021 13:15:29 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Michael Turquette , Stephen Boyd , Matti Vaittinen , Linus Walleij , Bartosz Golaszewski , Sebastian Reichel , Alessandro Zummo , Alexandre Belloni , Wim Van Sebroeck , Guenter Roeck , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-power@fi.rohmeurope.com, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH 6/9] gpio: bd70528 Drop BD70528 support Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-watchdog@vger.kernel.org The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen Acked-by: Bartosz Golaszewski --- Please let me know if some of you think the driver is needed. --- drivers/gpio/Kconfig | 11 -- drivers/gpio/Makefile | 1 - drivers/gpio/gpio-bd70528.c | 230 ------------------------------------ 3 files changed, 242 deletions(-) delete mode 100644 drivers/gpio/gpio-bd70528.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 1dd0ec6727fd..459ec388cc00 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1106,17 +1106,6 @@ config GPIO_ARIZONA help Support for GPIOs on Wolfson Arizona class devices. -config GPIO_BD70528 - tristate "ROHM BD70528 GPIO support" - depends on MFD_ROHM_BD70528 - help - Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs - available on the ROHM PMIC in total. The GPIOs can also - generate interrupts. - - This driver can also be built as a module. If so, the module - will be called gpio-bd70528. - config GPIO_BD71815 tristate "ROHM BD71815 PMIC GPIO support" depends on MFD_ROHM_BD71828 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index d7c81e1611a4..e9c4423b582a 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_GPIO_ASPEED_SGPIO) += gpio-aspeed-sgpio.o obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BCM_XGS_IPROC) += gpio-xgs-iproc.o -obj-$(CONFIG_GPIO_BD70528) += gpio-bd70528.o obj-$(CONFIG_GPIO_BD71815) += gpio-bd71815.o obj-$(CONFIG_GPIO_BD71828) += gpio-bd71828.o obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o diff --git a/drivers/gpio/gpio-bd70528.c b/drivers/gpio/gpio-bd70528.c deleted file mode 100644 index 397a50d6bc65..000000000000 --- a/drivers/gpio/gpio-bd70528.c +++ /dev/null @@ -1,230 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Copyright (C) 2018 ROHM Semiconductors -// gpio-bd70528.c ROHM BD70528MWV gpio driver - -#include -#include -#include -#include -#include - -#define GPIO_IN_REG(offset) (BD70528_REG_GPIO1_IN + (offset) * 2) -#define GPIO_OUT_REG(offset) (BD70528_REG_GPIO1_OUT + (offset) * 2) - -struct bd70528_gpio { - struct regmap *regmap; - struct device *dev; - struct gpio_chip gpio; -}; - -static int bd70528_set_debounce(struct bd70528_gpio *bdgpio, - unsigned int offset, unsigned int debounce) -{ - u8 val; - - switch (debounce) { - case 0: - val = BD70528_DEBOUNCE_DISABLE; - break; - case 1 ... 15000: - val = BD70528_DEBOUNCE_15MS; - break; - case 15001 ... 30000: - val = BD70528_DEBOUNCE_30MS; - break; - case 30001 ... 50000: - val = BD70528_DEBOUNCE_50MS; - break; - default: - dev_err(bdgpio->dev, - "Invalid debounce value %u\n", debounce); - return -EINVAL; - } - return regmap_update_bits(bdgpio->regmap, GPIO_IN_REG(offset), - BD70528_DEBOUNCE_MASK, val); -} - -static int bd70528_get_direction(struct gpio_chip *chip, unsigned int offset) -{ - struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); - int val, ret; - - /* Do we need to do something to IRQs here? */ - ret = regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset), &val); - if (ret) { - dev_err(bdgpio->dev, "Could not read gpio direction\n"); - return ret; - } - if (val & BD70528_GPIO_OUT_EN_MASK) - return GPIO_LINE_DIRECTION_OUT; - - return GPIO_LINE_DIRECTION_IN; -} - -static int bd70528_gpio_set_config(struct gpio_chip *chip, unsigned int offset, - unsigned long config) -{ - struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); - - switch (pinconf_to_config_param(config)) { - case PIN_CONFIG_DRIVE_OPEN_DRAIN: - return regmap_update_bits(bdgpio->regmap, - GPIO_OUT_REG(offset), - BD70528_GPIO_DRIVE_MASK, - BD70528_GPIO_OPEN_DRAIN); - break; - case PIN_CONFIG_DRIVE_PUSH_PULL: - return regmap_update_bits(bdgpio->regmap, - GPIO_OUT_REG(offset), - BD70528_GPIO_DRIVE_MASK, - BD70528_GPIO_PUSH_PULL); - break; - case PIN_CONFIG_INPUT_DEBOUNCE: - return bd70528_set_debounce(bdgpio, offset, - pinconf_to_config_argument(config)); - break; - default: - break; - } - return -ENOTSUPP; -} - -static int bd70528_direction_input(struct gpio_chip *chip, unsigned int offset) -{ - struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); - - /* Do we need to do something to IRQs here? */ - return regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset), - BD70528_GPIO_OUT_EN_MASK, - BD70528_GPIO_OUT_DISABLE); -} - -static void bd70528_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ - int ret; - struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); - u8 val = (value) ? BD70528_GPIO_OUT_HI : BD70528_GPIO_OUT_LO; - - ret = regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset), - BD70528_GPIO_OUT_MASK, val); - if (ret) - dev_err(bdgpio->dev, "Could not set gpio to %d\n", value); -} - -static int bd70528_direction_output(struct gpio_chip *chip, unsigned int offset, - int value) -{ - struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); - - bd70528_gpio_set(chip, offset, value); - return regmap_update_bits(bdgpio->regmap, GPIO_OUT_REG(offset), - BD70528_GPIO_OUT_EN_MASK, - BD70528_GPIO_OUT_ENABLE); -} - -#define GPIO_IN_STATE_MASK(offset) (BD70528_GPIO_IN_STATE_BASE << (offset)) - -static int bd70528_gpio_get_o(struct bd70528_gpio *bdgpio, unsigned int offset) -{ - int ret; - unsigned int val; - - ret = regmap_read(bdgpio->regmap, GPIO_OUT_REG(offset), &val); - if (!ret) - ret = !!(val & BD70528_GPIO_OUT_MASK); - else - dev_err(bdgpio->dev, "GPIO (out) state read failed\n"); - - return ret; -} - -static int bd70528_gpio_get_i(struct bd70528_gpio *bdgpio, unsigned int offset) -{ - unsigned int val; - int ret; - - ret = regmap_read(bdgpio->regmap, BD70528_REG_GPIO_STATE, &val); - - if (!ret) - ret = !(val & GPIO_IN_STATE_MASK(offset)); - else - dev_err(bdgpio->dev, "GPIO (in) state read failed\n"); - - return ret; -} - -static int bd70528_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - int ret; - struct bd70528_gpio *bdgpio = gpiochip_get_data(chip); - - /* - * There is a race condition where someone might be changing the - * GPIO direction after we get it but before we read the value. But - * application design where GPIO direction may be changed just when - * we read GPIO value would be pointless as reader could not know - * whether the returned high/low state is caused by input or output. - * Or then there must be other ways to mitigate the issue. Thus - * locking would make no sense. - */ - ret = bd70528_get_direction(chip, offset); - if (ret == GPIO_LINE_DIRECTION_OUT) - ret = bd70528_gpio_get_o(bdgpio, offset); - else if (ret == GPIO_LINE_DIRECTION_IN) - ret = bd70528_gpio_get_i(bdgpio, offset); - else - dev_err(bdgpio->dev, "failed to read GPIO direction\n"); - - return ret; -} - -static int bd70528_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct bd70528_gpio *bdgpio; - int ret; - - bdgpio = devm_kzalloc(dev, sizeof(*bdgpio), GFP_KERNEL); - if (!bdgpio) - return -ENOMEM; - bdgpio->dev = dev; - bdgpio->gpio.parent = dev->parent; - bdgpio->gpio.label = "bd70528-gpio"; - bdgpio->gpio.owner = THIS_MODULE; - bdgpio->gpio.get_direction = bd70528_get_direction; - bdgpio->gpio.direction_input = bd70528_direction_input; - bdgpio->gpio.direction_output = bd70528_direction_output; - bdgpio->gpio.set_config = bd70528_gpio_set_config; - bdgpio->gpio.can_sleep = true; - bdgpio->gpio.get = bd70528_gpio_get; - bdgpio->gpio.set = bd70528_gpio_set; - bdgpio->gpio.ngpio = 4; - bdgpio->gpio.base = -1; -#ifdef CONFIG_OF_GPIO - bdgpio->gpio.of_node = dev->parent->of_node; -#endif - bdgpio->regmap = dev_get_regmap(dev->parent, NULL); - if (!bdgpio->regmap) - return -ENODEV; - - ret = devm_gpiochip_add_data(dev, &bdgpio->gpio, bdgpio); - if (ret) - dev_err(dev, "gpio_init: Failed to add bd70528-gpio\n"); - - return ret; -} - -static struct platform_driver bd70528_gpio = { - .driver = { - .name = "bd70528-gpio" - }, - .probe = bd70528_probe, -}; - -module_platform_driver(bd70528_gpio); - -MODULE_AUTHOR("Matti Vaittinen "); -MODULE_DESCRIPTION("BD70528 voltage regulator driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:bd70528-gpio");