diff mbox series

[6/8] MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc

Message ID 20210530171802.23649-7-paul@crapouillou.net
State Accepted
Commit 318951afb3af26af5526b21896cb3a035c5f8a34
Headers show
Series Misc Ingenic patches | expand

Commit Message

Paul Cercueil May 30, 2021, 5:18 p.m. UTC 
The "ingenic,jz4780-i2c" should have "ingenic,jz4770-i2c" as a fallback
compatible, as per the Device Tree documentation found in
Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 8d01feef7ff5..9e34f433b9b5 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -339,7 +339,7 @@  uart4: serial@10034000 {
 	};
 
 	i2c0: i2c@10050000 {
-		compatible = "ingenic,jz4780-i2c";
+		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -357,7 +357,7 @@  i2c0: i2c@10050000 {
 	};
 
 	i2c1: i2c@10051000 {
-		compatible = "ingenic,jz4780-i2c";
+		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10051000 0x1000>;
@@ -374,7 +374,7 @@  i2c1: i2c@10051000 {
 	};
 
 	i2c2: i2c@10052000 {
-		compatible = "ingenic,jz4780-i2c";
+		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10052000 0x1000>;
@@ -391,7 +391,7 @@  i2c2: i2c@10052000 {
 	};
 
 	i2c3: i2c@10053000 {
-		compatible = "ingenic,jz4780-i2c";
+		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10053000 0x1000>;
@@ -408,7 +408,7 @@  i2c3: i2c@10053000 {
 	};
 
 	i2c4: i2c@10054000 {
-		compatible = "ingenic,jz4780-i2c";
+		compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10054000 0x1000>;