[03/10] i2c: xiic: Fix coding style issues

Message ID 20210531131948.19477-4-raviteja.narayanam@xilinx.com
State New
Headers show
Series
  • Untitled series #132169
Related show

Commit Message

Raviteja Narayanam May 31, 2021, 1:19 p.m.
From: Michal Simek <michal.simek@xilinx.com>

Most of these stuff are reported by checkpatch.
But fixes are:
- Incorrect indetation
- Missing blank line after variable declaration
- Additional ()
- Missing spaces around +
- Else after if with return
- Missing parenthesis when if has them
- Newlines
- Remove MODULE_ALIAS - none is really using it
- Changing msleep to usleep_range
- Other trivial fixes

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
---
 drivers/i2c/busses/i2c-xiic.c | 69 +++++++++++++++++------------------
 1 file changed, 34 insertions(+), 35 deletions(-)

Comments

Joe Perches May 31, 2021, 3:49 p.m. | #1
On Mon, 2021-05-31 at 07:19 -0600, Raviteja Narayanam wrote:
> From: Michal Simek <michal.simek@xilinx.com>
> 
> Most of these stuff are reported by checkpatch.

trivia:

> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
[]
> @@ -519,8 +522,8 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
>  
> 
>  	/* Service requesting interrupt */
>  	if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
> -		((pend & XIIC_INTR_TX_ERROR_MASK) &&
> -		!(pend & XIIC_INTR_RX_FULL_MASK))) {
> +	    ((pend & XIIC_INTR_TX_ERROR_MASK) &&
> +	    !(pend & XIIC_INTR_RX_FULL_MASK))) {

This last line would more commonly be indented one more space to
align to the appropriate open parenthesis depth.

tab then 4 spaces for
	    ((pend & XIIC_INTR_TX_ERROR_MASK) &&
tab then 5 spaces for
	     !(pend & XIIC_INTR_RX_FULL_MASK))) {

Patch

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 004103267e9c..fa2eef9e622f 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -69,7 +69,7 @@  struct xiic_i2c {
 	wait_queue_head_t wait;
 	struct i2c_adapter adap;
 	struct i2c_msg *tx_msg;
-	struct mutex lock;
+	struct mutex lock; /* Locking between isr and new xfer */
 	unsigned int tx_pos;
 	unsigned int nmsgs;
 	struct i2c_msg *rx_msg;
@@ -82,24 +82,23 @@  struct xiic_i2c {
 	bool prev_msg_tx;
 };
 
-
 #define XIIC_MSB_OFFSET 0
-#define XIIC_REG_OFFSET (0x100+XIIC_MSB_OFFSET)
+#define XIIC_REG_OFFSET (0x100 + XIIC_MSB_OFFSET)
 
 /*
  * Register offsets in bytes from RegisterBase. Three is added to the
  * base offset to access LSB (IBM style) of the word
  */
-#define XIIC_CR_REG_OFFSET   (0x00+XIIC_REG_OFFSET)	/* Control Register   */
-#define XIIC_SR_REG_OFFSET   (0x04+XIIC_REG_OFFSET)	/* Status Register    */
-#define XIIC_DTR_REG_OFFSET  (0x08+XIIC_REG_OFFSET)	/* Data Tx Register   */
-#define XIIC_DRR_REG_OFFSET  (0x0C+XIIC_REG_OFFSET)	/* Data Rx Register   */
-#define XIIC_ADR_REG_OFFSET  (0x10+XIIC_REG_OFFSET)	/* Address Register   */
-#define XIIC_TFO_REG_OFFSET  (0x14+XIIC_REG_OFFSET)	/* Tx FIFO Occupancy  */
-#define XIIC_RFO_REG_OFFSET  (0x18+XIIC_REG_OFFSET)	/* Rx FIFO Occupancy  */
-#define XIIC_TBA_REG_OFFSET  (0x1C+XIIC_REG_OFFSET)	/* 10 Bit Address reg */
-#define XIIC_RFD_REG_OFFSET  (0x20+XIIC_REG_OFFSET)	/* Rx FIFO Depth reg  */
-#define XIIC_GPO_REG_OFFSET  (0x24+XIIC_REG_OFFSET)	/* Output Register    */
+#define XIIC_CR_REG_OFFSET   (0x00 + XIIC_REG_OFFSET)	/* Control Register   */
+#define XIIC_SR_REG_OFFSET   (0x04 + XIIC_REG_OFFSET)	/* Status Register    */
+#define XIIC_DTR_REG_OFFSET  (0x08 + XIIC_REG_OFFSET)	/* Data Tx Register   */
+#define XIIC_DRR_REG_OFFSET  (0x0C + XIIC_REG_OFFSET)	/* Data Rx Register   */
+#define XIIC_ADR_REG_OFFSET  (0x10 + XIIC_REG_OFFSET)	/* Address Register   */
+#define XIIC_TFO_REG_OFFSET  (0x14 + XIIC_REG_OFFSET)	/* Tx FIFO Occupancy  */
+#define XIIC_RFO_REG_OFFSET  (0x18 + XIIC_REG_OFFSET)	/* Rx FIFO Occupancy  */
+#define XIIC_TBA_REG_OFFSET  (0x1C + XIIC_REG_OFFSET)	/* 10 Bit Address reg */
+#define XIIC_RFD_REG_OFFSET  (0x20 + XIIC_REG_OFFSET)	/* Rx FIFO Depth reg  */
+#define XIIC_GPO_REG_OFFSET  (0x24 + XIIC_REG_OFFSET)	/* Output Register    */
 
 /* Control Register masks */
 #define XIIC_CR_ENABLE_DEVICE_MASK        0x01	/* Device enable = 1      */
@@ -237,18 +236,21 @@  static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
 static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
 {
 	u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+
 	xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier & ~mask);
 }
 
 static inline void xiic_irq_en(struct xiic_i2c *i2c, u32 mask)
 {
 	u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+
 	xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier | mask);
 }
 
 static inline void xiic_irq_clr(struct xiic_i2c *i2c, u32 mask)
 {
 	u32 isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+
 	xiic_setreg32(i2c, XIIC_IISR_OFFSET, isr & mask);
 }
 
@@ -418,7 +420,8 @@  static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
 
 	while (len--) {
 		u16 data = i2c->tx_msg->buf[i2c->tx_pos++];
-		if ((xiic_tx_space(i2c) == 0) && (i2c->nmsgs == 1)) {
+
+		if (!xiic_tx_space(i2c) && i2c->nmsgs == 1) {
 			/* last message in transfer -> STOP */
 			data |= XIIC_TX_DYN_STOP_MASK;
 			dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
@@ -519,8 +522,8 @@  static irqreturn_t xiic_process(int irq, void *dev_id)
 
 	/* Service requesting interrupt */
 	if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
-		((pend & XIIC_INTR_TX_ERROR_MASK) &&
-		!(pend & XIIC_INTR_RX_FULL_MASK))) {
+	    ((pend & XIIC_INTR_TX_ERROR_MASK) &&
+	    !(pend & XIIC_INTR_RX_FULL_MASK))) {
 		/* bus arbritration lost, or...
 		 * Transmit error _OR_ RX completed
 		 * if this happens when RX_FULL is not set
@@ -662,9 +665,8 @@  static int xiic_busy(struct xiic_i2c *i2c)
 	 * should ignore it, since bus will never be released and i2c will be
 	 * stuck forever.
 	 */
-	if (i2c->singlemaster) {
+	if (i2c->singlemaster)
 		return 0;
-	}
 
 	/* for instance if previous transfer was terminated due to TX error
 	 * it might be that the bus is on it's way to become available
@@ -672,7 +674,7 @@  static int xiic_busy(struct xiic_i2c *i2c)
 	 */
 	err = xiic_bus_busy(i2c);
 	while (err && tries--) {
-		msleep(1);
+		usleep_range(1000, 2000);
 		err = xiic_bus_busy(i2c);
 	}
 
@@ -867,7 +869,6 @@  static void xiic_start_send(struct xiic_i2c *i2c)
 		xiic_std_fill_tx_fifo(i2c);
 
 		if ((cr & XIIC_CR_MSMS_MASK) == 0) {
-
 			/* Start Tx by writing to CR */
 			cr = xiic_getreg8(i2c, XIIC_CR_REG_OFFSET);
 			xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, cr |
@@ -891,9 +892,6 @@  static irqreturn_t xiic_isr(int irq, void *dev_id)
 	/* Do not processes a devices interrupts if the device has no
 	 * interrupts pending
 	 */
-
-	dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__);
-
 	isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
 	ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
 	pend = isr & ier;
@@ -907,6 +905,7 @@  static void __xiic_start_xfer(struct xiic_i2c *i2c)
 {
 	int first = 1;
 	int fifo_space = xiic_tx_fifo_space(i2c);
+
 	dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, fifos space: %d\n",
 		__func__, i2c->tx_msg, fifo_space);
 
@@ -921,19 +920,20 @@  static void __xiic_start_xfer(struct xiic_i2c *i2c)
 			i2c->nmsgs--;
 			i2c->tx_msg++;
 			i2c->tx_pos = 0;
-		} else
+		} else {
 			first = 0;
+		}
 
 		if (i2c->tx_msg->flags & I2C_M_RD) {
 			/* we dont date putting several reads in the FIFO */
 			xiic_start_recv(i2c);
 			return;
-		} else {
-			xiic_start_send(i2c);
-			if (xiic_tx_space(i2c) != 0) {
-				/* the message could not be completely sent */
-				break;
-			}
+		}
+
+		xiic_start_send(i2c);
+		if (xiic_tx_space(i2c) != 0) {
+			/* the message could not be completely sent */
+			break;
 		}
 
 		fifo_space = xiic_tx_fifo_space(i2c);
@@ -944,12 +944,12 @@  static void __xiic_start_xfer(struct xiic_i2c *i2c)
 	 */
 	if (i2c->nmsgs > 1 || xiic_tx_space(i2c))
 		xiic_irq_clr_en(i2c, XIIC_INTR_TX_HALF_MASK);
-
 }
 
 static int xiic_start_xfer(struct xiic_i2c *i2c)
 {
 	int ret;
+
 	mutex_lock(&i2c->lock);
 
 	ret = xiic_reinit(i2c);
@@ -1001,8 +1001,8 @@  static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		goto out;
 	}
 
-	if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
-		(i2c->state == STATE_DONE), HZ)) {
+	if (wait_event_timeout(i2c->wait, i2c->state == STATE_ERROR ||
+			       i2c->state == STATE_DONE, HZ)) {
 		err = (i2c->state == STATE_DONE) ? num : -EIO;
 		goto out;
 	} else {
@@ -1035,7 +1035,6 @@  static const struct i2c_adapter xiic_adapter = {
 	.algo = &xiic_algorithm,
 };
 
-
 static int xiic_i2c_probe(struct platform_device *pdev)
 {
 	struct xiic_i2c *i2c;
@@ -1195,6 +1194,7 @@  static const struct dev_pm_ops xiic_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(xiic_i2c_runtime_suspend,
 			   xiic_i2c_runtime_resume, NULL)
 };
+
 static struct platform_driver xiic_i2c_driver = {
 	.probe   = xiic_i2c_probe,
 	.remove  = xiic_i2c_remove,
@@ -1210,4 +1210,3 @@  module_platform_driver(xiic_i2c_driver);
 MODULE_AUTHOR("info@mocean-labs.com");
 MODULE_DESCRIPTION("Xilinx I2C bus driver");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:"DRIVER_NAME);