diff mbox series

[net-next] net: neterion: fix doc warnings in s2io.c

Message ID 20210531124859.3847016-1-yangyingliang@huawei.com
State New
Headers show
Series [net-next] net: neterion: fix doc warnings in s2io.c | expand

Commit Message

Yang Yingliang May 31, 2021, 12:48 p.m. UTC 
Add description for may_sleep to fix the W=1 warnings:

  drivers/net/ethernet/neterion/s2io.c:1110: warning: Function parameter or member 'may_sleep' not described in 'init_tti'
  drivers/net/ethernet/neterion/s2io.c:3335: warning: Function parameter or member 'may_sleep' not described in 'wait_for_cmd_complete'
  drivers/net/ethernet/neterion/s2io.c:4881: warning: Function parameter or member 'may_sleep' not described in 's2io_set_multicast'

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/net/ethernet/neterion/s2io.c | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

patchwork-bot+netdevbpf@kernel.org June 1, 2021, 10:10 p.m. UTC | #1 
Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Mon, 31 May 2021 20:48:59 +0800 you wrote:
> Add description for may_sleep to fix the W=1 warnings:

> 

>   drivers/net/ethernet/neterion/s2io.c:1110: warning: Function parameter or member 'may_sleep' not described in 'init_tti'

>   drivers/net/ethernet/neterion/s2io.c:3335: warning: Function parameter or member 'may_sleep' not described in 'wait_for_cmd_complete'

>   drivers/net/ethernet/neterion/s2io.c:4881: warning: Function parameter or member 'may_sleep' not described in 's2io_set_multicast'

> 

> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>

> 

> [...]


Here is the summary with links:
  - [net-next] net: neterion: fix doc warnings in s2io.c
    https://git.kernel.org/netdev/net-next/c/0bf4d9af2efe

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 27a65ab3d501..0b017d4f5c08 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -1101,6 +1101,8 @@  static int s2io_print_pci_mode(struct s2io_nic *nic)
  *  @nic: device private variable
  *  @link: link status (UP/DOWN) used to enable/disable continuous
  *  transmit interrupts
+ *  @may_sleep: parameter indicates if sleeping when waiting for
+ *  command complete
  *  Description: The function configures transmit traffic interrupts
  *  Return Value:  SUCCESS on success and
  *  '-1' on failure
@@ -3323,6 +3325,8 @@  static void s2io_updt_xpak_counter(struct net_device *dev)
  *  @addr: address
  *  @busy_bit: bit to check for busy
  *  @bit_state: state to check
+ *  @may_sleep: parameter indicates if sleeping when waiting for
+ *  command complete
  *  Description: Function that waits for a command to Write into RMAC
  *  ADDR DATA registers to be completed and returns either success or
  *  error depending on whether the command was complete or not.
@@ -4868,6 +4872,8 @@  static struct net_device_stats *s2io_get_stats(struct net_device *dev)
 /**
  *  s2io_set_multicast - entry point for multicast address enable/disable.
  *  @dev : pointer to the device structure
+ *  @may_sleep: parameter indicates if sleeping when waiting for command
+ *  complete
  *  Description:
  *  This function is a driver entry point which gets called by the kernel
  *  whenever multicast addresses must be enabled/disabled. This also gets