@@ -2922,13 +2922,13 @@ static int sja1105_setup(struct dsa_swit
rc = sja1105_static_config_load(priv, ports);
if (rc < 0) {
dev_err(ds->dev, "Failed to load static config: %d\n", rc);
- return rc;
+ goto out_ptp_clock_unregister;
}
/* Configure the CGU (PHY link modes and speeds) */
rc = sja1105_clocking_setup(priv);
if (rc < 0) {
dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
- return rc;
+ goto out_static_config_free;
}
/* On SJA1105, VLAN filtering per se is always enabled in hardware.
* The only thing we can do to disable it is lie about what the 802.1Q
@@ -2949,7 +2949,7 @@ static int sja1105_setup(struct dsa_swit
rc = sja1105_devlink_setup(ds);
if (rc < 0)
- return rc;
+ goto out_static_config_free;
/* The DSA/switchdev model brings up switch ports in standalone mode by
* default, and that means vlan_filtering is 0 since they're not under
@@ -2958,6 +2958,17 @@ static int sja1105_setup(struct dsa_swit
rtnl_lock();
rc = sja1105_setup_8021q_tagging(ds, true);
rtnl_unlock();
+ if (rc)
+ goto out_devlink_teardown;
+
+ return 0;
+
+out_devlink_teardown:
+ sja1105_devlink_teardown(ds);
+out_ptp_clock_unregister:
+ sja1105_ptp_clock_unregister(ds);
+out_static_config_free:
+ sja1105_static_config_free(&priv->static_config);
return rc;
}