diff mbox series

usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

Message ID 20210601084830.260196-1-narmstrong@baylibre.com
State New
Headers show
Series usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled | expand

Commit Message

Neil Armstrong June 1, 2021, 8:48 a.m. UTC
When only PHY1 is used (for example on Odroid-HC4), the regmap init code
uses the usb2 ports when doesn't initialize the PHY1 regmap entry.

This fixes:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
pc : regmap_update_bits_base+0x40/0xa0
lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
...
Call trace:
regmap_update_bits_base+0x40/0xa0
dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
dwc3_meson_g12a_usb2_init+0x7c/0xc8
dwc3_meson_g12a_usb_init+0x28/0x48
dwc3_meson_g12a_probe+0x298/0x540
platform_probe+0x70/0xe0
really_probe+0xf0/0x4d8
driver_probe_device+0xfc/0x168
...

Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Martin Blumenstingl June 3, 2021, 6:20 p.m. UTC | #1
On Tue, Jun 1, 2021 at 10:49 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>

> When only PHY1 is used (for example on Odroid-HC4), the regmap init code

> uses the usb2 ports when doesn't initialize the PHY1 regmap entry.

>

> This fixes:

> Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020

> ...

> pc : regmap_update_bits_base+0x40/0xa0

> lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8

> ...

> Call trace:

> regmap_update_bits_base+0x40/0xa0

> dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8

> dwc3_meson_g12a_usb2_init+0x7c/0xc8

> dwc3_meson_g12a_usb_init+0x28/0x48

> dwc3_meson_g12a_probe+0x298/0x540

> platform_probe+0x70/0xe0

> really_probe+0xf0/0x4d8

> driver_probe_device+0xfc/0x168

> ...

>

> Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Greg Kroah-Hartman June 4, 2021, 10:58 a.m. UTC | #2
On Tue, Jun 01, 2021 at 10:48:30AM +0200, Neil Armstrong wrote:
> When only PHY1 is used (for example on Odroid-HC4), the regmap init code

> uses the usb2 ports when doesn't initialize the PHY1 regmap entry.


<snip>

Meta comment, you signed this, and it worked!

Looking up https://lore.kernel.org/r/20210601084830.260196-1-narmstrong%40baylibre.com
Grabbing thread from lore.kernel.org/linux-amlogic/20210601084830.260196-1-narmstrong%40baylibre.com/t.mbox.gz
Analyzing 2 messages in the thread
Checking attestation on all messages, may take a moment...
---
  ✓ [PATCH] usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled
    + Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (✓ DKIM/lists.infradead.org)
  ---
  ✓ Signed: openpgp/narmstrong@baylibre.com
  ✗ BADSIG: DKIM/baylibre-com.20150623.gappssmtp.com
  ✓ Signed: DKIM/lists.infradead.org (From: narmstrong@baylibre.com)
---
Total patches: 1
---
 Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com
 Base: not found
Applying: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled


Odd that DKIM didn't work for baylibre-com, but hey, I'll take a real
signature over DKIM anyday!

thanks for doing this.

greg k-h
Konstantin Ryabitsev June 4, 2021, 3:07 p.m. UTC | #3
On Fri, Jun 04, 2021 at 12:58:16PM +0200, Greg KH wrote:
> Meta comment, you signed this, and it worked!


NOICE. \o/

> Looking up https://lore.kernel.org/r/20210601084830.260196-1-narmstrong%40baylibre.com

> Grabbing thread from lore.kernel.org/linux-amlogic/20210601084830.260196-1-narmstrong%40baylibre.com/t.mbox.gz

> Analyzing 2 messages in the thread

> Checking attestation on all messages, may take a moment...

> ---

>   ✓ [PATCH] usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

>     + Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (✓ DKIM/lists.infradead.org)

>   ---

>   ✓ Signed: openpgp/narmstrong@baylibre.com

>   ✗ BADSIG: DKIM/baylibre-com.20150623.gappssmtp.com

>   ✓ Signed: DKIM/lists.infradead.org (From: narmstrong@baylibre.com)

> ---

> Total patches: 1

> ---

>  Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com

>  Base: not found

> Applying: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

> 

> 

> Odd that DKIM didn't work for baylibre-com, but hey, I'll take a real

> signature over DKIM anyday!


That lookup happened to grab the thread from linux-amlogic, which is
mailman2-managed and is known to break DKIM. I'll try to fix our configuration
so that known-DKIM-friendly sources are given priority. This way, when a thread
exists on multiple lists, you'll get the one more likely to pass DKIM checks.

> thanks for doing this.


Yes, thanks! Hopefully, more people will start doing this.

-K
Konstantin Ryabitsev June 4, 2021, 4:46 p.m. UTC | #4
On Fri, Jun 04, 2021 at 11:07:42AM -0400, Konstantin Ryabitsev wrote:
> > Odd that DKIM didn't work for baylibre-com, but hey, I'll take a real

> > signature over DKIM anyday!

> 

> That lookup happened to grab the thread from linux-amlogic, which is

> mailman2-managed and is known to break DKIM. I'll try to fix our configuration

> so that known-DKIM-friendly sources are given priority. This way, when a thread

> exists on multiple lists, you'll get the one more likely to pass DKIM checks.


This is now in place -- lore will now prefer results from DKIM-friendly
sources. E.g. grabbing the same message-id will now return the thread from
linux-usb (via vger) instead of linux-amlogic (via infradead).

    $ b4 am -o/tmp 20210601084830.260196-1-narmstrong@baylibre.com
    Looking up https://lore.kernel.org/r/20210601084830.260196-1-narmstrong%40baylibre.com
    Grabbing thread from lore.kernel.org/linux-usb/20210601084830.260196-1-narmstrong%40baylibre.com/t.mbox.gz
    Analyzing 4 messages in the thread
    Checking attestation on all messages, may take a moment...
    ---
      ✓ [PATCH] usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled
        + Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (✓ DKIM/googlemail.com)
      ---
      ✓ Signed: openpgp/narmstrong@baylibre.com
      ✓ Signed: DKIM/baylibre-com.20150623.gappssmtp.com (From: narmstrong@baylibre.com)
    ---
    Total patches: 1
    ---
     Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com
     Base: not found
           git am /tmp/20210601_narmstrong_usb_dwc3_meson_g12a_fix_usb2_phy_glue_init_when_phy0_is_disabled.mbx

-K
Greg Kroah-Hartman June 5, 2021, 7:02 a.m. UTC | #5
On Fri, Jun 04, 2021 at 12:46:01PM -0400, Konstantin Ryabitsev wrote:
> On Fri, Jun 04, 2021 at 11:07:42AM -0400, Konstantin Ryabitsev wrote:

> > > Odd that DKIM didn't work for baylibre-com, but hey, I'll take a real

> > > signature over DKIM anyday!

> > 

> > That lookup happened to grab the thread from linux-amlogic, which is

> > mailman2-managed and is known to break DKIM. I'll try to fix our configuration

> > so that known-DKIM-friendly sources are given priority. This way, when a thread

> > exists on multiple lists, you'll get the one more likely to pass DKIM checks.

> 

> This is now in place -- lore will now prefer results from DKIM-friendly

> sources. E.g. grabbing the same message-id will now return the thread from

> linux-usb (via vger) instead of linux-amlogic (via infradead).

> 

>     $ b4 am -o/tmp 20210601084830.260196-1-narmstrong@baylibre.com

>     Looking up https://lore.kernel.org/r/20210601084830.260196-1-narmstrong%40baylibre.com

>     Grabbing thread from lore.kernel.org/linux-usb/20210601084830.260196-1-narmstrong%40baylibre.com/t.mbox.gz

>     Analyzing 4 messages in the thread

>     Checking attestation on all messages, may take a moment...

>     ---

>       ✓ [PATCH] usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

>         + Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (✓ DKIM/googlemail.com)

>       ---

>       ✓ Signed: openpgp/narmstrong@baylibre.com

>       ✓ Signed: DKIM/baylibre-com.20150623.gappssmtp.com (From: narmstrong@baylibre.com)

>     ---

>     Total patches: 1

>     ---

>      Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com

>      Base: not found

>            git am /tmp/20210601_narmstrong_usb_dwc3_meson_g12a_fix_usb2_phy_glue_init_when_phy0_is_disabled.mbx


This is great, thanks for changing this on the lore backend, and for all
of this work in the firstplace.

greg k-h
Neil Armstrong June 7, 2021, 6:46 a.m. UTC | #6
On 04/06/2021 18:46, Konstantin Ryabitsev wrote:
> On Fri, Jun 04, 2021 at 11:07:42AM -0400, Konstantin Ryabitsev wrote:

>>> Odd that DKIM didn't work for baylibre-com, but hey, I'll take a real

>>> signature over DKIM anyday!

>>

>> That lookup happened to grab the thread from linux-amlogic, which is

>> mailman2-managed and is known to break DKIM. I'll try to fix our configuration

>> so that known-DKIM-friendly sources are given priority. This way, when a thread

>> exists on multiple lists, you'll get the one more likely to pass DKIM checks.

> 

> This is now in place -- lore will now prefer results from DKIM-friendly

> sources. E.g. grabbing the same message-id will now return the thread from

> linux-usb (via vger) instead of linux-amlogic (via infradead).

> 

>     $ b4 am -o/tmp 20210601084830.260196-1-narmstrong@baylibre.com

>     Looking up https://lore.kernel.org/r/20210601084830.260196-1-narmstrong%40baylibre.com

>     Grabbing thread from lore.kernel.org/linux-usb/20210601084830.260196-1-narmstrong%40baylibre.com/t.mbox.gz

>     Analyzing 4 messages in the thread

>     Checking attestation on all messages, may take a moment...

>     ---

>       ✓ [PATCH] usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled

>         + Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> (✓ DKIM/googlemail.com)

>       ---

>       ✓ Signed: openpgp/narmstrong@baylibre.com

>       ✓ Signed: DKIM/baylibre-com.20150623.gappssmtp.com (From: narmstrong@baylibre.com)

>     ---

>     Total patches: 1

>     ---

>      Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com

>      Base: not found

>            git am /tmp/20210601_narmstrong_usb_dwc3_meson_g12a_fix_usb2_phy_glue_init_when_phy0_is_disabled.mbx

> 

> -K

> 


Nice, thanks for this !

Neil
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bdf1f98dfad8..9c944bc6d555 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -651,7 +651,7 @@  static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 		return PTR_ERR(priv->usb_glue_regmap);
 
 	/* Create a regmap for each USB2 PHY control register set */
-	for (i = 0; i < priv->usb2_ports; i++) {
+	for (i = 0; i < priv->drvdata->num_phys; i++) {
 		struct regmap_config u2p_regmap_config = {
 			.reg_bits = 8,
 			.val_bits = 32,
@@ -659,6 +659,9 @@  static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
 			.max_register = U2P_R1,
 		};
 
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
 		u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL,
 							"u2p-%d", i);
 		if (!u2p_regmap_config.name)