| Message ID | 20210603224007.120560-6-djrscally@gmail.com |
|---|---|
| State | Accepted |
| Commit | 5de691bffe57fd0fc2b4dcdcf13815c56d11db10 |
| Headers | show |
| Series | Introduce intel_skl_int3472 module | expand |
Hi Daniel,
I love your patch! Perhaps something to improve:
[auto build test WARNING on pm/linux-next]
[also build test WARNING on lee-mfd/for-mfd-next linus/master v5.13-rc4 next-20210603]
[cannot apply to gpio/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Daniel-Scally/Introduce-intel_skl_int3472-module/20210604-064345
base: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
reproduce (this is a W=1 build):
# https://github.com/0day-ci/linux/commit/3edcad8c200f211063a35d125e9fd350a2efeb40
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Daniel-Scally/Introduce-intel_skl_int3472-module/20210604-064345
git checkout 3edcad8c200f211063a35d125e9fd350a2efeb40
# save the attached .config to linux build tree
make W=1 ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c:76:5: warning: no previous prototype for 'skl_int3472_tps68470_calc_type' [-Wmissing-prototypes]
76 | int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vim +/skl_int3472_tps68470_calc_type +76 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c
52
53 /** skl_int3472_tps68470_calc_type: Check what platform a device is designed for
54 * @adev: A pointer to a &struct acpi_device
55 *
56 * Check CLDB buffer against the PMIC's adev. If present, then we check
57 * the value of control_logic_type field and follow one of the
58 * following scenarios:
59 *
60 * 1. No CLDB - likely ACPI tables designed for ChromeOS. We
61 * create platform devices for the GPIOs and OpRegion drivers.
62 *
63 * 2. CLDB, with control_logic_type = 2 - probably ACPI tables
64 * made for Windows 2-in-1 platforms. Register pdevs for GPIO,
65 * Clock and Regulator drivers to bind to.
66 *
67 * 3. Any other value in control_logic_type, we should never have
68 * gotten to this point; fail probe and return.
69 *
70 * Return:
71 * * 1 Device intended for ChromeOS
72 * * 2 Device intended for Windows
73 * * -EINVAL Where @adev has an object named CLDB but it does not conform to
74 * our expectations
75 */
> 76 int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
77 {
78 struct int3472_cldb cldb = { 0 };
79 int ret;
80
81 /*
82 * A CLDB buffer that exists, but which does not match our expectations
83 * should trigger an error so we don't blindly continue.
84 */
85 ret = skl_int3472_fill_cldb(adev, &cldb);
86 if (ret && ret != -ENODEV)
87 return ret;
88
89 if (ret)
90 return DESIGNED_FOR_CHROMEOS;
91
92 if (cldb.control_logic_type != 2)
93 return -EINVAL;
94
95 return DESIGNED_FOR_WINDOWS;
96 }
97
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Hi Daniel,
I love your patch! Perhaps something to improve:
[auto build test WARNING on pm/linux-next]
[also build test WARNING on lee-mfd/for-mfd-next linus/master v5.13-rc4 next-20210603]
[cannot apply to gpio/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Daniel-Scally/Introduce-intel_skl_int3472-module/20210604-064345
base: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next
config: x86_64-randconfig-r012-20210604 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 5c0d1b2f902aa6a9cf47cc7e42c5b83bb2217cf9)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/3edcad8c200f211063a35d125e9fd350a2efeb40
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Daniel-Scally/Introduce-intel_skl_int3472-module/20210604-064345
git checkout 3edcad8c200f211063a35d125e9fd350a2efeb40
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c:76:5: warning: no previous prototype for function 'skl_int3472_tps68470_calc_type' [-Wmissing-prototypes]
int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
^
drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c:76:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
^
static
1 warning generated.
vim +/skl_int3472_tps68470_calc_type +76 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c
52
53 /** skl_int3472_tps68470_calc_type: Check what platform a device is designed for
54 * @adev: A pointer to a &struct acpi_device
55 *
56 * Check CLDB buffer against the PMIC's adev. If present, then we check
57 * the value of control_logic_type field and follow one of the
58 * following scenarios:
59 *
60 * 1. No CLDB - likely ACPI tables designed for ChromeOS. We
61 * create platform devices for the GPIOs and OpRegion drivers.
62 *
63 * 2. CLDB, with control_logic_type = 2 - probably ACPI tables
64 * made for Windows 2-in-1 platforms. Register pdevs for GPIO,
65 * Clock and Regulator drivers to bind to.
66 *
67 * 3. Any other value in control_logic_type, we should never have
68 * gotten to this point; fail probe and return.
69 *
70 * Return:
71 * * 1 Device intended for ChromeOS
72 * * 2 Device intended for Windows
73 * * -EINVAL Where @adev has an object named CLDB but it does not conform to
74 * our expectations
75 */
> 76 int skl_int3472_tps68470_calc_type(struct acpi_device *adev)
77 {
78 struct int3472_cldb cldb = { 0 };
79 int ret;
80
81 /*
82 * A CLDB buffer that exists, but which does not match our expectations
83 * should trigger an error so we don't blindly continue.
84 */
85 ret = skl_int3472_fill_cldb(adev, &cldb);
86 if (ret && ret != -ENODEV)
87 return ret;
88
89 if (ret)
90 return DESIGNED_FOR_CHROMEOS;
91
92 if (cldb.control_logic_type != 2)
93 return -EINVAL;
94
95 return DESIGNED_FOR_WINDOWS;
96 }
97
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Ah - forgot to make the function static, let me sent another of this patch. On 04/06/2021 02:31, kernel test robot wrote: > Hi Daniel, > > I love your patch! Perhaps something to improve: > > [auto build test WARNING on pm/linux-next] > [also build test WARNING on lee-mfd/for-mfd-next linus/master v5.13-rc4 next-20210603] > [cannot apply to gpio/for-next] > [If your patch is applied to the wrong git tree, kindly drop us a note. > And when submitting patch, we suggest to use '--base' as documented in > https://git-scm.com/docs/git-format-patch] > > url: https://github.com/0day-ci/linux/commits/Daniel-Scally/Introduce-intel_skl_int3472-module/20210604-064345 > base: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next > config: x86_64-allyesconfig (attached as .config) > compiler: gcc-9 (Debian 9.3.0-22) 9.3.0 > reproduce (this is a W=1 build): > # https://github.com/0day-ci/linux/commit/3edcad8c200f211063a35d125e9fd350a2efeb40 > git remote add linux-review https://github.com/0day-ci/linux > git fetch --no-tags linux-review Daniel-Scally/Introduce-intel_skl_int3472-module/20210604-064345 > git checkout 3edcad8c200f211063a35d125e9fd350a2efeb40 > # save the attached .config to linux build tree > make W=1 ARCH=x86_64 > > If you fix the issue, kindly add following tag as appropriate > Reported-by: kernel test robot <lkp@intel.com> > > All warnings (new ones prefixed by >>): > >>> drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c:76:5: warning: no previous prototype for 'skl_int3472_tps68470_calc_type' [-Wmissing-prototypes] > 76 | int skl_int3472_tps68470_calc_type(struct acpi_device *adev) > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > vim +/skl_int3472_tps68470_calc_type +76 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c > > 52 > 53 /** skl_int3472_tps68470_calc_type: Check what platform a device is designed for > 54 * @adev: A pointer to a &struct acpi_device > 55 * > 56 * Check CLDB buffer against the PMIC's adev. If present, then we check > 57 * the value of control_logic_type field and follow one of the > 58 * following scenarios: > 59 * > 60 * 1. No CLDB - likely ACPI tables designed for ChromeOS. We > 61 * create platform devices for the GPIOs and OpRegion drivers. > 62 * > 63 * 2. CLDB, with control_logic_type = 2 - probably ACPI tables > 64 * made for Windows 2-in-1 platforms. Register pdevs for GPIO, > 65 * Clock and Regulator drivers to bind to. > 66 * > 67 * 3. Any other value in control_logic_type, we should never have > 68 * gotten to this point; fail probe and return. > 69 * > 70 * Return: > 71 * * 1 Device intended for ChromeOS > 72 * * 2 Device intended for Windows > 73 * * -EINVAL Where @adev has an object named CLDB but it does not conform to > 74 * our expectations > 75 */ > > 76 int skl_int3472_tps68470_calc_type(struct acpi_device *adev) > 77 { > 78 struct int3472_cldb cldb = { 0 }; > 79 int ret; > 80 > 81 /* > 82 * A CLDB buffer that exists, but which does not match our expectations > 83 * should trigger an error so we don't blindly continue. > 84 */ > 85 ret = skl_int3472_fill_cldb(adev, &cldb); > 86 if (ret && ret != -ENODEV) > 87 return ret; > 88 > 89 if (ret) > 90 return DESIGNED_FOR_CHROMEOS; > 91 > 92 if (cldb.control_logic_type != 2) > 93 return -EINVAL; > 94 > 95 return DESIGNED_FOR_WINDOWS; > 96 } > 97 > > --- > 0-DAY CI Kernel Test Service, Intel Corporation > https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Hi, On 6/4/21 12:40 AM, Daniel Scally wrote: > ACPI devices with _HID INT3472 are currently matched to the tps68470 > driver, however this does not cover all situations in which that _HID > occurs. We've encountered three possibilities: > > 1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing > a physical TPS68470 device) that requires a GPIO and OpRegion driver > 2. On devices designed for Windows, an ACPI device with _HID INT3472 > (again representing a physical TPS68470 device) which requires GPIO, > Clock and Regulator drivers. > 3. On other devices designed for Windows, an ACPI device with _HID > INT3472 which does **not** represent a physical TPS68470, and is instead > used as a dummy device to group some system GPIO lines which are meant > to be consumed by the sensor that is dependent on this entry. > > This commit adds a new module, registering a platform driver to deal > with the 3rd scenario plus an i2c driver to deal with #1 and #2, by > querying the CLDB buffer found against INT3472 entries to determine > which is most appropriate. > > Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Daniel Scally <djrscally@gmail.com> Thank you for your patch, I've applied this patch to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans I've fixed up the missing static marking of skl_int3472_tps68470_calc_type() spotted by lkp@intel.com while applying the patch to my tree. Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > --- > Changes since v4: > - Some formatting and commenting tidy up > - Cleared up some function exit paths to avoid gotos > - Refactored skl_int3472_get_sensor_module_config() and also > skl_int3472_tps68470_probe(), which involved adding a new function. > > Andy - I didn't look at the reg-fixed-voltage suggestion yet, but I think I > covered the rest of your suggestions from v4. > > MAINTAINERS | 5 + > drivers/platform/x86/Kconfig | 2 + > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/intel-int3472/Kconfig | 30 ++ > drivers/platform/x86/intel-int3472/Makefile | 5 + > .../intel_skl_int3472_clk_and_regulator.c | 196 ++++++++ > .../intel-int3472/intel_skl_int3472_common.c | 106 +++++ > .../intel-int3472/intel_skl_int3472_common.h | 118 +++++ > .../intel_skl_int3472_discrete.c | 417 ++++++++++++++++++ > .../intel_skl_int3472_tps68470.c | 137 ++++++ > 10 files changed, 1017 insertions(+) > create mode 100644 drivers/platform/x86/intel-int3472/Kconfig > create mode 100644 drivers/platform/x86/intel-int3472/Makefile > create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c > create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c > create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h > create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c > create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 008fcad7ac00..8dcc7e005ace 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9378,6 +9378,11 @@ S: Maintained > F: arch/x86/include/asm/intel_scu_ipc.h > F: drivers/platform/x86/intel_scu_* > > +INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER > +M: Daniel Scally <djrscally@gmail.com> > +S: Maintained > +F: drivers/platform/x86/intel-int3472/ > + > INTEL SPEED SELECT TECHNOLOGY > M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > L: platform-driver-x86@vger.kernel.org > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 2714f7c3843e..1263b8efcd50 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -697,6 +697,8 @@ config INTEL_CHT_INT33FE > device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m > for Type-C device. > > +source "drivers/platform/x86/intel-int3472/Kconfig" > + > config INTEL_HID_EVENT > tristate "INTEL HID Event" > depends on ACPI > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index dcc8cdb95b4d..c0612c02d037 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -76,6 +76,7 @@ obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o > obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o > obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o > obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o > +obj-$(CONFIG_INTEL_SKL_INT3472) += intel-int3472/ > obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o > > # MSI > diff --git a/drivers/platform/x86/intel-int3472/Kconfig b/drivers/platform/x86/intel-int3472/Kconfig > new file mode 100644 > index 000000000000..c112878e833b > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/Kconfig > @@ -0,0 +1,30 @@ > +config INTEL_SKL_INT3472 > + tristate "Intel SkyLake ACPI INT3472 Driver" > + depends on ACPI > + depends on COMMON_CLK && CLKDEV_LOOKUP > + depends on I2C > + depends on GPIOLIB > + depends on REGULATOR > + select MFD_CORE > + select REGMAP_I2C > + help > + This driver adds power controller support for the Intel SkyCam > + devices found on the Intel SkyLake platforms. > + > + The INT3472 is a camera power controller, a logical device found on > + Intel Skylake-based systems that can map to different hardware > + devices depending on the platform. On machines designed for Chrome OS > + it maps to a TPS68470 camera PMIC. On machines designed for Windows, > + it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a > + set of discrete GPIOs and power gates. > + > + If your device was designed for Chrome OS, this driver will provide > + an ACPI OpRegion, which must be available before any of the devices > + using it are probed. For this reason, you should select Y if your > + device was designed for ChromeOS. For the same reason the > + I2C_DESIGNWARE_PLATFORM option must be set to Y too. > + > + Say Y or M here if you have a SkyLake device designed for use > + with Windows or ChromeOS. Say N here if you are not sure. > + > + The module will be named "intel-skl-int3472". > diff --git a/drivers/platform/x86/intel-int3472/Makefile b/drivers/platform/x86/intel-int3472/Makefile > new file mode 100644 > index 000000000000..48bd97f0a04e > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/Makefile > @@ -0,0 +1,5 @@ > +obj-$(CONFIG_INTEL_SKL_INT3472) += intel_skl_int3472.o > +intel_skl_int3472-objs := intel_skl_int3472_common.o \ > + intel_skl_int3472_discrete.o \ > + intel_skl_int3472_tps68470.o \ > + intel_skl_int3472_clk_and_regulator.o > diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c > new file mode 100644 > index 000000000000..ceee860e2c07 > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c > @@ -0,0 +1,196 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Author: Dan Scally <djrscally@gmail.com> */ > + > +#include <linux/acpi.h> > +#include <linux/clkdev.h> > +#include <linux/clk-provider.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/regulator/driver.h> > +#include <linux/slab.h> > + > +#include "intel_skl_int3472_common.h" > + > +/* > + * The regulators have to have .ops to be valid, but the only ops we actually > + * support are .enable and .disable which are handled via .ena_gpiod. Pass an > + * empty struct to clear the check without lying about capabilities. > + */ > +static const struct regulator_ops int3472_gpio_regulator_ops; > + > +static int skl_int3472_clk_prepare(struct clk_hw *hw) > +{ > + struct int3472_gpio_clock *clk = to_int3472_clk(hw); > + > + gpiod_set_value_cansleep(clk->ena_gpio, 1); > + gpiod_set_value_cansleep(clk->led_gpio, 1); > + > + return 0; > +} > + > +static void skl_int3472_clk_unprepare(struct clk_hw *hw) > +{ > + struct int3472_gpio_clock *clk = to_int3472_clk(hw); > + > + gpiod_set_value_cansleep(clk->ena_gpio, 0); > + gpiod_set_value_cansleep(clk->led_gpio, 0); > +} > + > +static int skl_int3472_clk_enable(struct clk_hw *hw) > +{ > + /* > + * We're just turning a GPIO on to enable the clock, which operation > + * has the potential to sleep. Given .enable() cannot sleep, but > + * .prepare() can, we toggle the GPIO in .prepare() instead. Thus, > + * nothing to do here. > + */ > + return 0; > +} > + > +static void skl_int3472_clk_disable(struct clk_hw *hw) > +{ > + /* Likewise, nothing to do here... */ > +} > + > +static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472) > +{ > + union acpi_object *obj; > + unsigned int freq; > + > + obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB"); > + if (IS_ERR(obj)) > + return 0; /* report rate as 0 on error */ > + > + if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) { > + dev_err(int3472->dev, "The buffer is too small\n"); > + kfree(obj); > + return 0; > + } > + > + freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET); > + > + kfree(obj); > + return freq; > +} > + > +static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct int3472_gpio_clock *clk = to_int3472_clk(hw); > + > + return clk->frequency; > +} > + > +static const struct clk_ops skl_int3472_clock_ops = { > + .prepare = skl_int3472_clk_prepare, > + .unprepare = skl_int3472_clk_unprepare, > + .enable = skl_int3472_clk_enable, > + .disable = skl_int3472_clk_disable, > + .recalc_rate = skl_int3472_clk_recalc_rate, > +}; > + > +int skl_int3472_register_clock(struct int3472_discrete_device *int3472) > +{ > + struct clk_init_data init = { > + .ops = &skl_int3472_clock_ops, > + .flags = CLK_GET_RATE_NOCACHE, > + }; > + int ret; > + > + init.name = kasprintf(GFP_KERNEL, "%s-clk", > + acpi_dev_name(int3472->adev)); > + if (!init.name) > + return -ENOMEM; > + > + int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472); > + > + int3472->clock.clk_hw.init = &init; > + int3472->clock.clk = clk_register(&int3472->adev->dev, > + &int3472->clock.clk_hw); > + if (IS_ERR(int3472->clock.clk)) { > + ret = PTR_ERR(int3472->clock.clk); > + goto out_free_init_name; > + } > + > + int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL, > + int3472->sensor_name); > + if (!int3472->clock.cl) { > + ret = -ENOMEM; > + goto err_unregister_clk; > + } > + > + kfree(init.name); > + return 0; > + > +err_unregister_clk: > + clk_unregister(int3472->clock.clk); > +out_free_init_name: > + kfree(init.name); > + > + return ret; > +} > + > +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, > + struct acpi_resource *ares) > +{ > + char *path = ares->data.gpio.resource_source.string_ptr; > + const struct int3472_sensor_config *sensor_config; > + struct regulator_consumer_supply supply_map; > + struct regulator_init_data init_data = { }; > + struct regulator_config cfg = { }; > + int ret; > + > + sensor_config = int3472->sensor_config; > + if (IS_ERR(sensor_config)) { > + dev_err(int3472->dev, "No sensor module config\n"); > + return PTR_ERR(sensor_config); > + } > + > + if (!sensor_config->supply_map.supply) { > + dev_err(int3472->dev, "No supply name defined\n"); > + return -ENODEV; > + } > + > + init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; > + init_data.num_consumer_supplies = 1; > + supply_map = sensor_config->supply_map; > + supply_map.dev_name = int3472->sensor_name; > + init_data.consumer_supplies = &supply_map; > + > + snprintf(int3472->regulator.regulator_name, > + sizeof(int3472->regulator.regulator_name), "%s-regulator", > + acpi_dev_name(int3472->adev)); > + snprintf(int3472->regulator.supply_name, > + GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0"); > + > + int3472->regulator.rdesc = INT3472_REGULATOR( > + int3472->regulator.regulator_name, > + int3472->regulator.supply_name, > + &int3472_gpio_regulator_ops); > + > + int3472->regulator.gpio = acpi_get_and_request_gpiod(path, > + ares->data.gpio.pin_table[0], > + "int3472,regulator"); > + if (IS_ERR(int3472->regulator.gpio)) { > + dev_err(int3472->dev, "Failed to get regulator GPIO line\n"); > + return PTR_ERR(int3472->regulator.gpio); > + } > + > + cfg.dev = &int3472->adev->dev; > + cfg.init_data = &init_data; > + cfg.ena_gpiod = int3472->regulator.gpio; > + > + int3472->regulator.rdev = regulator_register(&int3472->regulator.rdesc, > + &cfg); > + if (IS_ERR(int3472->regulator.rdev)) { > + ret = PTR_ERR(int3472->regulator.rdev); > + goto err_free_gpio; > + } > + > + return 0; > + > +err_free_gpio: > + gpiod_put(int3472->regulator.gpio); > + > + return ret; > +} > diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c > new file mode 100644 > index 000000000000..497e74fba75f > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c > @@ -0,0 +1,106 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Author: Dan Scally <djrscally@gmail.com> */ > + > +#include <linux/acpi.h> > +#include <linux/i2c.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +#include "intel_skl_int3472_common.h" > + > +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id) > +{ > + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; > + acpi_handle handle = adev->handle; > + union acpi_object *obj; > + acpi_status status; > + > + status = acpi_evaluate_object(handle, id, NULL, &buffer); > + if (ACPI_FAILURE(status)) > + return ERR_PTR(-ENODEV); > + > + obj = buffer.pointer; > + if (!obj) > + return ERR_PTR(-ENODEV); > + > + if (obj->type != ACPI_TYPE_BUFFER) { > + acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id); > + kfree(obj); > + return ERR_PTR(-EINVAL); > + } > + > + return obj; > +} > + > +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb) > +{ > + union acpi_object *obj; > + int ret; > + > + obj = skl_int3472_get_acpi_buffer(adev, "CLDB"); > + if (IS_ERR(obj)) > + return PTR_ERR(obj); > + > + if (obj->buffer.length > sizeof(*cldb)) { > + acpi_handle_err(adev->handle, "The CLDB buffer is too large\n"); > + ret = -EINVAL; > + goto out_free_obj; > + } > + > + memcpy(cldb, obj->buffer.pointer, obj->buffer.length); > + ret = 0; > + > +out_free_obj: > + kfree(obj); > + return ret; > +} > + > +static const struct acpi_device_id int3472_device_id[] = { > + { "INT3472", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, int3472_device_id); > + > +static struct platform_driver int3472_discrete = { > + .driver = { > + .name = "int3472-discrete", > + .acpi_match_table = int3472_device_id, > + }, > + .probe = skl_int3472_discrete_probe, > + .remove = skl_int3472_discrete_remove, > +}; > + > +static struct i2c_driver int3472_tps68470 = { > + .driver = { > + .name = "int3472-tps68470", > + .acpi_match_table = int3472_device_id, > + }, > + .probe_new = skl_int3472_tps68470_probe, > +}; > + > +static int skl_int3472_init(void) > +{ > + int ret; > + > + ret = platform_driver_register(&int3472_discrete); > + if (ret) > + return ret; > + > + ret = i2c_register_driver(THIS_MODULE, &int3472_tps68470); > + if (ret) > + platform_driver_unregister(&int3472_discrete); > + > + return ret; > +} > +module_init(skl_int3472_init); > + > +static void skl_int3472_exit(void) > +{ > + platform_driver_unregister(&int3472_discrete); > + i2c_del_driver(&int3472_tps68470); > +} > +module_exit(skl_int3472_exit); > + > +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Device Driver"); > +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h > new file mode 100644 > index 000000000000..6fdf78584219 > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h > @@ -0,0 +1,118 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* Author: Dan Scally <djrscally@gmail.com> */ > + > +#ifndef _INTEL_SKL_INT3472_H > +#define _INTEL_SKL_INT3472_H > + > +#include <linux/clk-provider.h> > +#include <linux/gpio/machine.h> > +#include <linux/regulator/driver.h> > +#include <linux/regulator/machine.h> > +#include <linux/types.h> > + > +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ > +#ifndef I2C_DEV_NAME_FORMAT > +#define I2C_DEV_NAME_FORMAT "i2c-%s" > +#endif > + > +/* PMIC GPIO Types */ > +#define INT3472_GPIO_TYPE_RESET 0x00 > +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 > +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b > +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c > +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d > + > +#define INT3472_PDEV_MAX_NAME_LEN 23 > +#define INT3472_MAX_SENSOR_GPIOS 3 > + > +#define GPIO_REGULATOR_NAME_LENGTH 21 > +#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH 9 > + > +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 > + > +#define INT3472_REGULATOR(_name, _supply, _ops) \ > + (const struct regulator_desc) { \ > + .name = _name, \ > + .supply_name = _supply, \ > + .type = REGULATOR_VOLTAGE, \ > + .ops = _ops, \ > + .owner = THIS_MODULE, \ > + } > + > +#define to_int3472_clk(hw) \ > + container_of(hw, struct int3472_gpio_clock, clk_hw) > + > +#define to_int3472_device(clk) \ > + container_of(clk, struct int3472_discrete_device, clock) > + > +struct acpi_device; > +struct i2c_client; > +struct platform_device; > + > +struct int3472_cldb { > + u8 version; > + /* > + * control logic type > + * 0: UNKNOWN > + * 1: DISCRETE(CRD-D) > + * 2: PMIC TPS68470 > + * 3: PMIC uP6641 > + */ > + u8 control_logic_type; > + u8 control_logic_id; > + u8 sensor_card_sku; > + u8 reserved[28]; > +}; > + > +struct int3472_gpio_function_remap { > + const char *documented; > + const char *actual; > +}; > + > +struct int3472_sensor_config { > + const char *sensor_module_name; > + struct regulator_consumer_supply supply_map; > + const struct int3472_gpio_function_remap *function_maps; > +}; > + > +struct int3472_discrete_device { > + struct acpi_device *adev; > + struct device *dev; > + struct acpi_device *sensor; > + const char *sensor_name; > + > + const struct int3472_sensor_config *sensor_config; > + > + struct int3472_gpio_regulator { > + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; > + char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH]; > + struct gpio_desc *gpio; > + struct regulator_dev *rdev; > + struct regulator_desc rdesc; > + } regulator; > + > + struct int3472_gpio_clock { > + struct clk *clk; > + struct clk_hw clk_hw; > + struct clk_lookup *cl; > + struct gpio_desc *ena_gpio; > + struct gpio_desc *led_gpio; > + u32 frequency; > + } clock; > + > + unsigned int ngpios; /* how many GPIOs have we seen */ > + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ > + struct gpiod_lookup_table gpios; > +}; > + > +int skl_int3472_discrete_probe(struct platform_device *pdev); > +int skl_int3472_discrete_remove(struct platform_device *pdev); > +int skl_int3472_tps68470_probe(struct i2c_client *client); > +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, > + char *id); > +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); > +int skl_int3472_register_clock(struct int3472_discrete_device *int3472); > +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, > + struct acpi_resource *ares); > + > +#endif > diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c > new file mode 100644 > index 000000000000..8c18dbff1c43 > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c > @@ -0,0 +1,417 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Author: Dan Scally <djrscally@gmail.com> */ > + > +#include <linux/acpi.h> > +#include <linux/clkdev.h> > +#include <linux/clk-provider.h> > +#include <linux/device.h> > +#include <linux/gpio/consumer.h> > +#include <linux/gpio/machine.h> > +#include <linux/i2c.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/overflow.h> > +#include <linux/platform_device.h> > +#include <linux/uuid.h> > + > +#include "intel_skl_int3472_common.h" > + > +/* > + * 79234640-9e10-4fea-a5c1-b5aa8b19756f > + * This _DSM GUID returns information about the GPIO lines mapped to a > + * discrete INT3472 device. Function number 1 returns a count of the GPIO > + * lines that are mapped. Subsequent functions return 32 bit ints encoding > + * information about the GPIO line, including its purpose. > + */ > +static const guid_t int3472_gpio_guid = > + GUID_INIT(0x79234640, 0x9e10, 0x4fea, > + 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f); > + > +/* > + * 822ace8f-2814-4174-a56b-5f029fe079ee > + * This _DSM GUID returns a string from the sensor device, which acts as a > + * module identifier. > + */ > +static const guid_t cio2_sensor_module_guid = > + GUID_INIT(0x822ace8f, 0x2814, 0x4174, > + 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee); > + > +/* > + * Here follows platform specific mapping information that we can pass to > + * the functions mapping resources to the sensors. Where the sensors have > + * a power enable pin defined in DSDT we need to provide a supply name so > + * the sensor drivers can find the regulator. The device name will be derived > + * from the sensor's ACPI device within the code. Optionally, we can provide a > + * NULL terminated array of function name mappings to deal with any platform > + * specific deviations from the documented behaviour of GPIOs. > + * > + * Map a GPIO function name to NULL to prevent the driver from mapping that > + * GPIO at all. > + */ > + > +static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = { > + { "reset", NULL }, > + { "powerdown", "reset" }, > + { } > +}; > + > +static const struct int3472_sensor_config int3472_sensor_configs[] = { > + /* Lenovo Miix 510-12ISK - OV2680, Front */ > + { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps }, > + /* Lenovo Miix 510-12ISK - OV5648, Rear */ > + { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL }, > + /* Surface Go 1&2 - OV5693, Front */ > + { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL }, > +}; > + > +static const struct int3472_sensor_config * > +skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472) > +{ > + union acpi_object *obj; > + unsigned int i; > + > + obj = acpi_evaluate_dsm_typed(int3472->sensor->handle, > + &cio2_sensor_module_guid, 0x00, > + 0x01, NULL, ACPI_TYPE_STRING); > + > + if (!obj) { > + dev_err(int3472->dev, > + "Failed to get sensor module string from _DSM\n"); > + return ERR_PTR(-ENODEV); > + } > + > + if (obj->string.type != ACPI_TYPE_STRING) { > + dev_err(int3472->dev, > + "Sensor _DSM returned a non-string value\n"); > + > + ACPI_FREE(obj); > + return ERR_PTR(-EINVAL); > + } > + > + for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) { > + if (!strcmp(int3472_sensor_configs[i].sensor_module_name, > + obj->string.pointer)) > + break; > + } > + > + ACPI_FREE(obj); > + > + if (i >= ARRAY_SIZE(int3472_sensor_configs)) > + return ERR_PTR(-EINVAL); > + > + return &int3472_sensor_configs[i]; > +} > + > +static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, > + struct acpi_resource *ares, > + const char *func, u32 polarity) > +{ > + char *path = ares->data.gpio.resource_source.string_ptr; > + const struct int3472_sensor_config *sensor_config; > + struct gpiod_lookup *table_entry; > + struct acpi_device *adev; > + acpi_handle handle; > + acpi_status status; > + int ret; > + > + if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) { > + dev_warn(int3472->dev, "Too many GPIOs mapped\n"); > + return -EINVAL; > + } > + > + sensor_config = int3472->sensor_config; > + if (!IS_ERR(sensor_config) && sensor_config->function_maps) { > + const struct int3472_gpio_function_remap *remap; > + > + for (remap = sensor_config->function_maps; remap->documented; remap++) { > + if (!strcmp(func, remap->documented)) { > + func = remap->actual; > + break; > + } > + } > + } > + > + /* Functions mapped to NULL should not be mapped to the sensor */ > + if (!func) > + return 0; > + > + status = acpi_get_handle(NULL, path, &handle); > + if (ACPI_FAILURE(status)) > + return -EINVAL; > + > + ret = acpi_bus_get_device(handle, &adev); > + if (ret) > + return -ENODEV; > + > + table_entry = &int3472->gpios.table[int3472->n_sensor_gpios]; > + table_entry->key = acpi_dev_name(adev); > + table_entry->chip_hwnum = ares->data.gpio.pin_table[0]; > + table_entry->con_id = func; > + table_entry->idx = 0; > + table_entry->flags = polarity; > + > + int3472->n_sensor_gpios++; > + > + return 0; > +} > + > +static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472, > + struct acpi_resource *ares, u8 type) > +{ > + char *path = ares->data.gpio.resource_source.string_ptr; > + struct gpio_desc *gpio; > + > + switch (type) { > + case INT3472_GPIO_TYPE_CLK_ENABLE: > + gpio = acpi_get_and_request_gpiod(path, ares->data.gpio.pin_table[0], > + "int3472,clk-enable"); > + if (IS_ERR(gpio)) > + return (PTR_ERR(gpio)); > + > + int3472->clock.ena_gpio = gpio; > + break; > + case INT3472_GPIO_TYPE_PRIVACY_LED: > + gpio = acpi_get_and_request_gpiod(path, ares->data.gpio.pin_table[0], > + "int3472,privacy-led"); > + if (IS_ERR(gpio)) > + return (PTR_ERR(gpio)); > + > + int3472->clock.led_gpio = gpio; > + break; > + default: > + dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type); > + break; > + } > + > + return 0; > +} > + > +/** > + * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor > + * @ares: A pointer to a &struct acpi_resource > + * @data: A pointer to a &struct int3472_discrete_device > + * > + * This function handles GPIO resources that are against an INT3472 > + * ACPI device, by checking the value of the corresponding _DSM entry. > + * This will return a 32bit int, where the lowest byte represents the > + * function of the GPIO pin: > + * > + * 0x00 Reset > + * 0x01 Power down > + * 0x0b Power enable > + * 0x0c Clock enable > + * 0x0d Privacy LED > + * > + * There are some known platform specific quirks where that does not quite > + * hold up; for example where a pin with type 0x01 (Power down) is mapped to > + * a sensor pin that performs a reset function or entries in _CRS and _DSM that > + * do not actually correspond to a physical connection. These will be handled > + * by the mapping sub-functions. > + * > + * GPIOs will either be mapped directly to the sensor device or else used > + * to create clocks and regulators via the usual frameworks. > + * > + * Return: > + * * 1 - To continue the loop > + * * 0 - When all resources found are handled properly. > + * * -EINVAL - If the resource is not a GPIO IO resource > + * * -ENODEV - If the resource has no corresponding _DSM entry > + * * -Other - Errors propagated from one of the sub-functions. > + */ > +static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, > + void *data) > +{ > + struct int3472_discrete_device *int3472 = data; > + struct acpi_resource_gpio *agpio; > + union acpi_object *obj; > + const char *err_msg; > + int ret; > + u8 type; > + > + if (!acpi_gpio_get_io_resource(ares, &agpio)) > + return 1; > + > + /* > + * ngpios + 2 because the index of this _DSM function is 1-based and > + * the first function is just a count. > + */ > + obj = acpi_evaluate_dsm_typed(int3472->adev->handle, > + &int3472_gpio_guid, 0x00, > + int3472->ngpios + 2, > + NULL, ACPI_TYPE_INTEGER); > + > + if (!obj) { > + dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n", > + ares->data.gpio.pin_table[0]); > + return 1; > + } > + > + type = obj->integer.value & 0xff; > + > + switch (type) { > + case INT3472_GPIO_TYPE_RESET: > + ret = skl_int3472_map_gpio_to_sensor(int3472, ares, "reset", > + GPIO_ACTIVE_LOW); > + if (ret) > + err_msg = "Failed to map reset pin to sensor\n"; > + > + break; > + case INT3472_GPIO_TYPE_POWERDOWN: > + ret = skl_int3472_map_gpio_to_sensor(int3472, ares, > + "powerdown", > + GPIO_ACTIVE_LOW); > + if (ret) > + err_msg = "Failed to map powerdown pin to sensor\n"; > + > + break; > + case INT3472_GPIO_TYPE_CLK_ENABLE: > + case INT3472_GPIO_TYPE_PRIVACY_LED: > + ret = skl_int3472_map_gpio_to_clk(int3472, ares, type); > + if (ret) > + err_msg = "Failed to map GPIO to clock\n"; > + > + break; > + case INT3472_GPIO_TYPE_POWER_ENABLE: > + ret = skl_int3472_register_regulator(int3472, ares); > + if (ret) > + err_msg = "Failed to map regulator to sensor\n"; > + > + break; > + default: > + dev_warn(int3472->dev, > + "GPIO type 0x%02x unknown; the sensor may not work\n", > + type); > + ret = 1; > + break; > + } > + > + int3472->ngpios++; > + ACPI_FREE(obj); > + > + if (ret) > + return dev_err_probe(int3472->dev, ret, err_msg); > + > + return 0; > +} > + > +static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) > +{ > + LIST_HEAD(resource_list); > + int ret; > + > + /* > + * No error check, because not having a sensor config is not necessarily > + * a failure mode. > + */ > + int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472); > + > + ret = acpi_dev_get_resources(int3472->adev, &resource_list, > + skl_int3472_handle_gpio_resources, > + int3472); > + if (ret) > + goto out_free_res_list; > + > + /* > + * If we find no clock enable GPIO pin then the privacy LED won't work. > + * We've never seen that situation, but it's possible. Warn the user so > + * it's clear what's happened. > + */ > + if (int3472->clock.ena_gpio) { > + ret = skl_int3472_register_clock(int3472); > + if (ret) > + goto out_free_res_list; > + } else { > + if (int3472->clock.led_gpio) > + dev_warn(int3472->dev, > + "No clk GPIO. The privacy LED won't work\n"); > + } > + > + int3472->gpios.dev_id = int3472->sensor_name; > + gpiod_add_lookup_table(&int3472->gpios); > + > +out_free_res_list: > + acpi_dev_free_resource_list(&resource_list); > + > + return ret; > +} > + > +int skl_int3472_discrete_probe(struct platform_device *pdev) > +{ > + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); > + struct int3472_discrete_device *int3472; > + struct int3472_cldb cldb; > + int ret; > + > + ret = skl_int3472_fill_cldb(adev, &cldb); > + if (ret) { > + dev_err(&pdev->dev, "Couldn't fill CLDB structure\n"); > + return ret; > + } > + > + if (cldb.control_logic_type != 1) { > + dev_err(&pdev->dev, "Unsupported control logic type %u\n", > + cldb.control_logic_type); > + return -EINVAL; > + } > + > + /* Max num GPIOs we've seen plus a terminator */ > + int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table, > + INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL); > + if (!int3472) > + return -ENOMEM; > + > + int3472->adev = adev; > + int3472->dev = &pdev->dev; > + platform_set_drvdata(pdev, int3472); > + > + int3472->sensor = acpi_dev_get_first_consumer_dev(adev); > + if (!int3472->sensor) { > + dev_err(&pdev->dev, "INT3472 seems to have no dependents.\n"); > + return -ENODEV; > + } > + > + int3472->sensor_name = devm_kasprintf(int3472->dev, GFP_KERNEL, > + I2C_DEV_NAME_FORMAT, > + acpi_dev_name(int3472->sensor)); > + if (!int3472->sensor_name) { > + ret = -ENOMEM; > + goto err_put_sensor; > + } > + > + /* > + * Initialising this list means we can call gpiod_remove_lookup_table() > + * in failure paths without issue. > + */ > + INIT_LIST_HEAD(&int3472->gpios.list); > + > + ret = skl_int3472_parse_crs(int3472); > + if (ret) { > + skl_int3472_discrete_remove(pdev); > + return ret; > + } > + > + return 0; > + > +err_put_sensor: > + acpi_dev_put(int3472->sensor); > + > + return ret; > +} > + > +int skl_int3472_discrete_remove(struct platform_device *pdev) > +{ > + struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); > + > + gpiod_remove_lookup_table(&int3472->gpios); > + regulator_unregister(int3472->regulator.rdev); > + clk_unregister(int3472->clock.clk); > + > + if (int3472->clock.cl) > + clkdev_drop(int3472->clock.cl); > + > + gpiod_put(int3472->regulator.gpio); > + gpiod_put(int3472->clock.ena_gpio); > + gpiod_put(int3472->clock.led_gpio); > + > + return 0; > +} > diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c > new file mode 100644 > index 000000000000..6306ba24e0bc > --- /dev/null > +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c > @@ -0,0 +1,137 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Author: Dan Scally <djrscally@gmail.com> */ > + > +#include <linux/i2c.h> > +#include <linux/mfd/core.h> > +#include <linux/mfd/tps68470.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > + > +#include "intel_skl_int3472_common.h" > + > +#define DESIGNED_FOR_CHROMEOS 1 > +#define DESIGNED_FOR_WINDOWS 2 > + > +static const struct mfd_cell tps68470_cros[] = { > + { .name = "tps68470-gpio" }, > + { .name = "tps68470_pmic_opregion" }, > +}; > + > +static const struct mfd_cell tps68470_win[] = { > + { .name = "tps68470-gpio" }, > + { .name = "tps68470-clk" }, > + { .name = "tps68470-regulator" }, > +}; > + > +static const struct regmap_config tps68470_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .max_register = TPS68470_REG_MAX, > +}; > + > +static int tps68470_chip_init(struct device *dev, struct regmap *regmap) > +{ > + unsigned int version; > + int ret; > + > + /* Force software reset */ > + ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); > + if (ret) > + return ret; > + > + ret = regmap_read(regmap, TPS68470_REG_REVID, &version); > + if (ret) { > + dev_err(dev, "Failed to read revision register: %d\n", ret); > + return ret; > + } > + > + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); > + > + return 0; > +} > + > +/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for > + * @adev: A pointer to a &struct acpi_device > + * > + * Check CLDB buffer against the PMIC's adev. If present, then we check > + * the value of control_logic_type field and follow one of the > + * following scenarios: > + * > + * 1. No CLDB - likely ACPI tables designed for ChromeOS. We > + * create platform devices for the GPIOs and OpRegion drivers. > + * > + * 2. CLDB, with control_logic_type = 2 - probably ACPI tables > + * made for Windows 2-in-1 platforms. Register pdevs for GPIO, > + * Clock and Regulator drivers to bind to. > + * > + * 3. Any other value in control_logic_type, we should never have > + * gotten to this point; fail probe and return. > + * > + * Return: > + * * 1 Device intended for ChromeOS > + * * 2 Device intended for Windows > + * * -EINVAL Where @adev has an object named CLDB but it does not conform to > + * our expectations > + */ > +int skl_int3472_tps68470_calc_type(struct acpi_device *adev) > +{ > + struct int3472_cldb cldb = { 0 }; > + int ret; > + > + /* > + * A CLDB buffer that exists, but which does not match our expectations > + * should trigger an error so we don't blindly continue. > + */ > + ret = skl_int3472_fill_cldb(adev, &cldb); > + if (ret && ret != -ENODEV) > + return ret; > + > + if (ret) > + return DESIGNED_FOR_CHROMEOS; > + > + if (cldb.control_logic_type != 2) > + return -EINVAL; > + > + return DESIGNED_FOR_WINDOWS; > +} > + > +int skl_int3472_tps68470_probe(struct i2c_client *client) > +{ > + struct acpi_device *adev = ACPI_COMPANION(&client->dev); > + struct regmap *regmap; > + int device_type; > + int ret; > + > + regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + i2c_set_clientdata(client, regmap); > + > + ret = tps68470_chip_init(&client->dev, regmap); > + if (ret < 0) { > + dev_err(&client->dev, "TPS68470 init error %d\n", ret); > + return ret; > + } > + > + device_type = skl_int3472_tps68470_calc_type(adev); > + switch (device_type) { > + case DESIGNED_FOR_WINDOWS: > + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, > + tps68470_win, ARRAY_SIZE(tps68470_win), > + NULL, 0, NULL); > + break; > + case DESIGNED_FOR_CHROMEOS: > + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, > + tps68470_cros, ARRAY_SIZE(tps68470_cros), > + NULL, 0, NULL); > + break; > + default: > + dev_err(&client->dev, "Failed to add MFD devices\n"); > + return device_type; > + } > + > + return ret; > +} >
Hi, On 6/16/21 8:08 PM, Andy Shevchenko wrote: > On Wed, Jun 16, 2021 at 8:58 PM Hans de Goede <hdegoede@redhat.com> wrote: >> On 6/4/21 12:40 AM, Daniel Scally wrote: >>> ACPI devices with _HID INT3472 are currently matched to the tps68470 >>> driver, however this does not cover all situations in which that _HID >>> occurs. We've encountered three possibilities: >>> >>> 1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing >>> a physical TPS68470 device) that requires a GPIO and OpRegion driver >>> 2. On devices designed for Windows, an ACPI device with _HID INT3472 >>> (again representing a physical TPS68470 device) which requires GPIO, >>> Clock and Regulator drivers. >>> 3. On other devices designed for Windows, an ACPI device with _HID >>> INT3472 which does **not** represent a physical TPS68470, and is instead >>> used as a dummy device to group some system GPIO lines which are meant >>> to be consumed by the sensor that is dependent on this entry. >>> >>> This commit adds a new module, registering a platform driver to deal >>> with the 3rd scenario plus an i2c driver to deal with #1 and #2, by >>> querying the CLDB buffer found against INT3472 entries to determine >>> which is most appropriate. >>> >>> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >>> Signed-off-by: Daniel Scally <djrscally@gmail.com> >> >> Thank you for your patch, I've applied this patch to my review-hans >> branch: >> https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans >> >> I've fixed up the missing static marking of skl_int3472_tps68470_calc_type() >> spotted by lkp@intel.com while applying the patch to my tree. > > Are you going to apply patch 6 as well? > IIRC it's acked by Lee. Ah you are right, it is Acked, but I'm not sure if that ack was for Lee being ok with it being merged through the pdx86 tree. I'll coordinate this with Lee off list. Regards, Hans
Hi Hans On 16/06/2021 18:58, Hans de Goede wrote: > Hi, > > On 6/4/21 12:40 AM, Daniel Scally wrote: >> ACPI devices with _HID INT3472 are currently matched to the tps68470 >> driver, however this does not cover all situations in which that _HID >> occurs. We've encountered three possibilities: >> >> 1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing >> a physical TPS68470 device) that requires a GPIO and OpRegion driver >> 2. On devices designed for Windows, an ACPI device with _HID INT3472 >> (again representing a physical TPS68470 device) which requires GPIO, >> Clock and Regulator drivers. >> 3. On other devices designed for Windows, an ACPI device with _HID >> INT3472 which does **not** represent a physical TPS68470, and is instead >> used as a dummy device to group some system GPIO lines which are meant >> to be consumed by the sensor that is dependent on this entry. >> >> This commit adds a new module, registering a platform driver to deal >> with the 3rd scenario plus an i2c driver to deal with #1 and #2, by >> querying the CLDB buffer found against INT3472 entries to determine >> which is most appropriate. >> >> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> Signed-off-by: Daniel Scally <djrscally@gmail.com> > Thank you for your patch, I've applied this patch to my review-hans > branch: > https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans > > I've fixed up the missing static marking of skl_int3472_tps68470_calc_type() > spotted by lkp@intel.com while applying the patch to my tree. Fantastic, thanks very much. > > Once I've run some tests on this branch the patches there will be > added to the platform-drivers-x86/for-next branch and eventually > will be included in the pdx86 pull-request to Linus for the next > merge-window. Excellent :) > > Regards, > > Hans > > > > >> --- >> Changes since v4: >> - Some formatting and commenting tidy up >> - Cleared up some function exit paths to avoid gotos >> - Refactored skl_int3472_get_sensor_module_config() and also >> skl_int3472_tps68470_probe(), which involved adding a new function. >> >> Andy - I didn't look at the reg-fixed-voltage suggestion yet, but I think I >> covered the rest of your suggestions from v4. >> >> MAINTAINERS | 5 + >> drivers/platform/x86/Kconfig | 2 + >> drivers/platform/x86/Makefile | 1 + >> drivers/platform/x86/intel-int3472/Kconfig | 30 ++ >> drivers/platform/x86/intel-int3472/Makefile | 5 + >> .../intel_skl_int3472_clk_and_regulator.c | 196 ++++++++ >> .../intel-int3472/intel_skl_int3472_common.c | 106 +++++ >> .../intel-int3472/intel_skl_int3472_common.h | 118 +++++ >> .../intel_skl_int3472_discrete.c | 417 ++++++++++++++++++ >> .../intel_skl_int3472_tps68470.c | 137 ++++++ >> 10 files changed, 1017 insertions(+) >> create mode 100644 drivers/platform/x86/intel-int3472/Kconfig >> create mode 100644 drivers/platform/x86/intel-int3472/Makefile >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c >> create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 008fcad7ac00..8dcc7e005ace 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -9378,6 +9378,11 @@ S: Maintained >> F: arch/x86/include/asm/intel_scu_ipc.h >> F: drivers/platform/x86/intel_scu_* >> >> +INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER >> +M: Daniel Scally <djrscally@gmail.com> >> +S: Maintained >> +F: drivers/platform/x86/intel-int3472/ >> + >> INTEL SPEED SELECT TECHNOLOGY >> M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> >> L: platform-driver-x86@vger.kernel.org >> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig >> index 2714f7c3843e..1263b8efcd50 100644 >> --- a/drivers/platform/x86/Kconfig >> +++ b/drivers/platform/x86/Kconfig >> @@ -697,6 +697,8 @@ config INTEL_CHT_INT33FE >> device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m >> for Type-C device. >> >> +source "drivers/platform/x86/intel-int3472/Kconfig" >> + >> config INTEL_HID_EVENT >> tristate "INTEL HID Event" >> depends on ACPI >> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile >> index dcc8cdb95b4d..c0612c02d037 100644 >> --- a/drivers/platform/x86/Makefile >> +++ b/drivers/platform/x86/Makefile >> @@ -76,6 +76,7 @@ obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o >> obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o >> obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o >> obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o >> +obj-$(CONFIG_INTEL_SKL_INT3472) += intel-int3472/ >> obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o >> >> # MSI >> diff --git a/drivers/platform/x86/intel-int3472/Kconfig b/drivers/platform/x86/intel-int3472/Kconfig >> new file mode 100644 >> index 000000000000..c112878e833b >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/Kconfig >> @@ -0,0 +1,30 @@ >> +config INTEL_SKL_INT3472 >> + tristate "Intel SkyLake ACPI INT3472 Driver" >> + depends on ACPI >> + depends on COMMON_CLK && CLKDEV_LOOKUP >> + depends on I2C >> + depends on GPIOLIB >> + depends on REGULATOR >> + select MFD_CORE >> + select REGMAP_I2C >> + help >> + This driver adds power controller support for the Intel SkyCam >> + devices found on the Intel SkyLake platforms. >> + >> + The INT3472 is a camera power controller, a logical device found on >> + Intel Skylake-based systems that can map to different hardware >> + devices depending on the platform. On machines designed for Chrome OS >> + it maps to a TPS68470 camera PMIC. On machines designed for Windows, >> + it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a >> + set of discrete GPIOs and power gates. >> + >> + If your device was designed for Chrome OS, this driver will provide >> + an ACPI OpRegion, which must be available before any of the devices >> + using it are probed. For this reason, you should select Y if your >> + device was designed for ChromeOS. For the same reason the >> + I2C_DESIGNWARE_PLATFORM option must be set to Y too. >> + >> + Say Y or M here if you have a SkyLake device designed for use >> + with Windows or ChromeOS. Say N here if you are not sure. >> + >> + The module will be named "intel-skl-int3472". >> diff --git a/drivers/platform/x86/intel-int3472/Makefile b/drivers/platform/x86/intel-int3472/Makefile >> new file mode 100644 >> index 000000000000..48bd97f0a04e >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/Makefile >> @@ -0,0 +1,5 @@ >> +obj-$(CONFIG_INTEL_SKL_INT3472) += intel_skl_int3472.o >> +intel_skl_int3472-objs := intel_skl_int3472_common.o \ >> + intel_skl_int3472_discrete.o \ >> + intel_skl_int3472_tps68470.o \ >> + intel_skl_int3472_clk_and_regulator.o >> diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c >> new file mode 100644 >> index 000000000000..ceee860e2c07 >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c >> @@ -0,0 +1,196 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* Author: Dan Scally <djrscally@gmail.com> */ >> + >> +#include <linux/acpi.h> >> +#include <linux/clkdev.h> >> +#include <linux/clk-provider.h> >> +#include <linux/device.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/regulator/driver.h> >> +#include <linux/slab.h> >> + >> +#include "intel_skl_int3472_common.h" >> + >> +/* >> + * The regulators have to have .ops to be valid, but the only ops we actually >> + * support are .enable and .disable which are handled via .ena_gpiod. Pass an >> + * empty struct to clear the check without lying about capabilities. >> + */ >> +static const struct regulator_ops int3472_gpio_regulator_ops; >> + >> +static int skl_int3472_clk_prepare(struct clk_hw *hw) >> +{ >> + struct int3472_gpio_clock *clk = to_int3472_clk(hw); >> + >> + gpiod_set_value_cansleep(clk->ena_gpio, 1); >> + gpiod_set_value_cansleep(clk->led_gpio, 1); >> + >> + return 0; >> +} >> + >> +static void skl_int3472_clk_unprepare(struct clk_hw *hw) >> +{ >> + struct int3472_gpio_clock *clk = to_int3472_clk(hw); >> + >> + gpiod_set_value_cansleep(clk->ena_gpio, 0); >> + gpiod_set_value_cansleep(clk->led_gpio, 0); >> +} >> + >> +static int skl_int3472_clk_enable(struct clk_hw *hw) >> +{ >> + /* >> + * We're just turning a GPIO on to enable the clock, which operation >> + * has the potential to sleep. Given .enable() cannot sleep, but >> + * .prepare() can, we toggle the GPIO in .prepare() instead. Thus, >> + * nothing to do here. >> + */ >> + return 0; >> +} >> + >> +static void skl_int3472_clk_disable(struct clk_hw *hw) >> +{ >> + /* Likewise, nothing to do here... */ >> +} >> + >> +static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472) >> +{ >> + union acpi_object *obj; >> + unsigned int freq; >> + >> + obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB"); >> + if (IS_ERR(obj)) >> + return 0; /* report rate as 0 on error */ >> + >> + if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) { >> + dev_err(int3472->dev, "The buffer is too small\n"); >> + kfree(obj); >> + return 0; >> + } >> + >> + freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET); >> + >> + kfree(obj); >> + return freq; >> +} >> + >> +static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw, >> + unsigned long parent_rate) >> +{ >> + struct int3472_gpio_clock *clk = to_int3472_clk(hw); >> + >> + return clk->frequency; >> +} >> + >> +static const struct clk_ops skl_int3472_clock_ops = { >> + .prepare = skl_int3472_clk_prepare, >> + .unprepare = skl_int3472_clk_unprepare, >> + .enable = skl_int3472_clk_enable, >> + .disable = skl_int3472_clk_disable, >> + .recalc_rate = skl_int3472_clk_recalc_rate, >> +}; >> + >> +int skl_int3472_register_clock(struct int3472_discrete_device *int3472) >> +{ >> + struct clk_init_data init = { >> + .ops = &skl_int3472_clock_ops, >> + .flags = CLK_GET_RATE_NOCACHE, >> + }; >> + int ret; >> + >> + init.name = kasprintf(GFP_KERNEL, "%s-clk", >> + acpi_dev_name(int3472->adev)); >> + if (!init.name) >> + return -ENOMEM; >> + >> + int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472); >> + >> + int3472->clock.clk_hw.init = &init; >> + int3472->clock.clk = clk_register(&int3472->adev->dev, >> + &int3472->clock.clk_hw); >> + if (IS_ERR(int3472->clock.clk)) { >> + ret = PTR_ERR(int3472->clock.clk); >> + goto out_free_init_name; >> + } >> + >> + int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL, >> + int3472->sensor_name); >> + if (!int3472->clock.cl) { >> + ret = -ENOMEM; >> + goto err_unregister_clk; >> + } >> + >> + kfree(init.name); >> + return 0; >> + >> +err_unregister_clk: >> + clk_unregister(int3472->clock.clk); >> +out_free_init_name: >> + kfree(init.name); >> + >> + return ret; >> +} >> + >> +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, >> + struct acpi_resource *ares) >> +{ >> + char *path = ares->data.gpio.resource_source.string_ptr; >> + const struct int3472_sensor_config *sensor_config; >> + struct regulator_consumer_supply supply_map; >> + struct regulator_init_data init_data = { }; >> + struct regulator_config cfg = { }; >> + int ret; >> + >> + sensor_config = int3472->sensor_config; >> + if (IS_ERR(sensor_config)) { >> + dev_err(int3472->dev, "No sensor module config\n"); >> + return PTR_ERR(sensor_config); >> + } >> + >> + if (!sensor_config->supply_map.supply) { >> + dev_err(int3472->dev, "No supply name defined\n"); >> + return -ENODEV; >> + } >> + >> + init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; >> + init_data.num_consumer_supplies = 1; >> + supply_map = sensor_config->supply_map; >> + supply_map.dev_name = int3472->sensor_name; >> + init_data.consumer_supplies = &supply_map; >> + >> + snprintf(int3472->regulator.regulator_name, >> + sizeof(int3472->regulator.regulator_name), "%s-regulator", >> + acpi_dev_name(int3472->adev)); >> + snprintf(int3472->regulator.supply_name, >> + GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0"); >> + >> + int3472->regulator.rdesc = INT3472_REGULATOR( >> + int3472->regulator.regulator_name, >> + int3472->regulator.supply_name, >> + &int3472_gpio_regulator_ops); >> + >> + int3472->regulator.gpio = acpi_get_and_request_gpiod(path, >> + ares->data.gpio.pin_table[0], >> + "int3472,regulator"); >> + if (IS_ERR(int3472->regulator.gpio)) { >> + dev_err(int3472->dev, "Failed to get regulator GPIO line\n"); >> + return PTR_ERR(int3472->regulator.gpio); >> + } >> + >> + cfg.dev = &int3472->adev->dev; >> + cfg.init_data = &init_data; >> + cfg.ena_gpiod = int3472->regulator.gpio; >> + >> + int3472->regulator.rdev = regulator_register(&int3472->regulator.rdesc, >> + &cfg); >> + if (IS_ERR(int3472->regulator.rdev)) { >> + ret = PTR_ERR(int3472->regulator.rdev); >> + goto err_free_gpio; >> + } >> + >> + return 0; >> + >> +err_free_gpio: >> + gpiod_put(int3472->regulator.gpio); >> + >> + return ret; >> +} >> diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c >> new file mode 100644 >> index 000000000000..497e74fba75f >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c >> @@ -0,0 +1,106 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* Author: Dan Scally <djrscally@gmail.com> */ >> + >> +#include <linux/acpi.h> >> +#include <linux/i2c.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> + >> +#include "intel_skl_int3472_common.h" >> + >> +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id) >> +{ >> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; >> + acpi_handle handle = adev->handle; >> + union acpi_object *obj; >> + acpi_status status; >> + >> + status = acpi_evaluate_object(handle, id, NULL, &buffer); >> + if (ACPI_FAILURE(status)) >> + return ERR_PTR(-ENODEV); >> + >> + obj = buffer.pointer; >> + if (!obj) >> + return ERR_PTR(-ENODEV); >> + >> + if (obj->type != ACPI_TYPE_BUFFER) { >> + acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id); >> + kfree(obj); >> + return ERR_PTR(-EINVAL); >> + } >> + >> + return obj; >> +} >> + >> +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb) >> +{ >> + union acpi_object *obj; >> + int ret; >> + >> + obj = skl_int3472_get_acpi_buffer(adev, "CLDB"); >> + if (IS_ERR(obj)) >> + return PTR_ERR(obj); >> + >> + if (obj->buffer.length > sizeof(*cldb)) { >> + acpi_handle_err(adev->handle, "The CLDB buffer is too large\n"); >> + ret = -EINVAL; >> + goto out_free_obj; >> + } >> + >> + memcpy(cldb, obj->buffer.pointer, obj->buffer.length); >> + ret = 0; >> + >> +out_free_obj: >> + kfree(obj); >> + return ret; >> +} >> + >> +static const struct acpi_device_id int3472_device_id[] = { >> + { "INT3472", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(acpi, int3472_device_id); >> + >> +static struct platform_driver int3472_discrete = { >> + .driver = { >> + .name = "int3472-discrete", >> + .acpi_match_table = int3472_device_id, >> + }, >> + .probe = skl_int3472_discrete_probe, >> + .remove = skl_int3472_discrete_remove, >> +}; >> + >> +static struct i2c_driver int3472_tps68470 = { >> + .driver = { >> + .name = "int3472-tps68470", >> + .acpi_match_table = int3472_device_id, >> + }, >> + .probe_new = skl_int3472_tps68470_probe, >> +}; >> + >> +static int skl_int3472_init(void) >> +{ >> + int ret; >> + >> + ret = platform_driver_register(&int3472_discrete); >> + if (ret) >> + return ret; >> + >> + ret = i2c_register_driver(THIS_MODULE, &int3472_tps68470); >> + if (ret) >> + platform_driver_unregister(&int3472_discrete); >> + >> + return ret; >> +} >> +module_init(skl_int3472_init); >> + >> +static void skl_int3472_exit(void) >> +{ >> + platform_driver_unregister(&int3472_discrete); >> + i2c_del_driver(&int3472_tps68470); >> +} >> +module_exit(skl_int3472_exit); >> + >> +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Device Driver"); >> +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); >> +MODULE_LICENSE("GPL v2"); >> diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h >> new file mode 100644 >> index 000000000000..6fdf78584219 >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h >> @@ -0,0 +1,118 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* Author: Dan Scally <djrscally@gmail.com> */ >> + >> +#ifndef _INTEL_SKL_INT3472_H >> +#define _INTEL_SKL_INT3472_H >> + >> +#include <linux/clk-provider.h> >> +#include <linux/gpio/machine.h> >> +#include <linux/regulator/driver.h> >> +#include <linux/regulator/machine.h> >> +#include <linux/types.h> >> + >> +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ >> +#ifndef I2C_DEV_NAME_FORMAT >> +#define I2C_DEV_NAME_FORMAT "i2c-%s" >> +#endif >> + >> +/* PMIC GPIO Types */ >> +#define INT3472_GPIO_TYPE_RESET 0x00 >> +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 >> +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b >> +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c >> +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d >> + >> +#define INT3472_PDEV_MAX_NAME_LEN 23 >> +#define INT3472_MAX_SENSOR_GPIOS 3 >> + >> +#define GPIO_REGULATOR_NAME_LENGTH 21 >> +#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH 9 >> + >> +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 >> + >> +#define INT3472_REGULATOR(_name, _supply, _ops) \ >> + (const struct regulator_desc) { \ >> + .name = _name, \ >> + .supply_name = _supply, \ >> + .type = REGULATOR_VOLTAGE, \ >> + .ops = _ops, \ >> + .owner = THIS_MODULE, \ >> + } >> + >> +#define to_int3472_clk(hw) \ >> + container_of(hw, struct int3472_gpio_clock, clk_hw) >> + >> +#define to_int3472_device(clk) \ >> + container_of(clk, struct int3472_discrete_device, clock) >> + >> +struct acpi_device; >> +struct i2c_client; >> +struct platform_device; >> + >> +struct int3472_cldb { >> + u8 version; >> + /* >> + * control logic type >> + * 0: UNKNOWN >> + * 1: DISCRETE(CRD-D) >> + * 2: PMIC TPS68470 >> + * 3: PMIC uP6641 >> + */ >> + u8 control_logic_type; >> + u8 control_logic_id; >> + u8 sensor_card_sku; >> + u8 reserved[28]; >> +}; >> + >> +struct int3472_gpio_function_remap { >> + const char *documented; >> + const char *actual; >> +}; >> + >> +struct int3472_sensor_config { >> + const char *sensor_module_name; >> + struct regulator_consumer_supply supply_map; >> + const struct int3472_gpio_function_remap *function_maps; >> +}; >> + >> +struct int3472_discrete_device { >> + struct acpi_device *adev; >> + struct device *dev; >> + struct acpi_device *sensor; >> + const char *sensor_name; >> + >> + const struct int3472_sensor_config *sensor_config; >> + >> + struct int3472_gpio_regulator { >> + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; >> + char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH]; >> + struct gpio_desc *gpio; >> + struct regulator_dev *rdev; >> + struct regulator_desc rdesc; >> + } regulator; >> + >> + struct int3472_gpio_clock { >> + struct clk *clk; >> + struct clk_hw clk_hw; >> + struct clk_lookup *cl; >> + struct gpio_desc *ena_gpio; >> + struct gpio_desc *led_gpio; >> + u32 frequency; >> + } clock; >> + >> + unsigned int ngpios; /* how many GPIOs have we seen */ >> + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ >> + struct gpiod_lookup_table gpios; >> +}; >> + >> +int skl_int3472_discrete_probe(struct platform_device *pdev); >> +int skl_int3472_discrete_remove(struct platform_device *pdev); >> +int skl_int3472_tps68470_probe(struct i2c_client *client); >> +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, >> + char *id); >> +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); >> +int skl_int3472_register_clock(struct int3472_discrete_device *int3472); >> +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, >> + struct acpi_resource *ares); >> + >> +#endif >> diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c >> new file mode 100644 >> index 000000000000..8c18dbff1c43 >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c >> @@ -0,0 +1,417 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* Author: Dan Scally <djrscally@gmail.com> */ >> + >> +#include <linux/acpi.h> >> +#include <linux/clkdev.h> >> +#include <linux/clk-provider.h> >> +#include <linux/device.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/gpio/machine.h> >> +#include <linux/i2c.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/overflow.h> >> +#include <linux/platform_device.h> >> +#include <linux/uuid.h> >> + >> +#include "intel_skl_int3472_common.h" >> + >> +/* >> + * 79234640-9e10-4fea-a5c1-b5aa8b19756f >> + * This _DSM GUID returns information about the GPIO lines mapped to a >> + * discrete INT3472 device. Function number 1 returns a count of the GPIO >> + * lines that are mapped. Subsequent functions return 32 bit ints encoding >> + * information about the GPIO line, including its purpose. >> + */ >> +static const guid_t int3472_gpio_guid = >> + GUID_INIT(0x79234640, 0x9e10, 0x4fea, >> + 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f); >> + >> +/* >> + * 822ace8f-2814-4174-a56b-5f029fe079ee >> + * This _DSM GUID returns a string from the sensor device, which acts as a >> + * module identifier. >> + */ >> +static const guid_t cio2_sensor_module_guid = >> + GUID_INIT(0x822ace8f, 0x2814, 0x4174, >> + 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee); >> + >> +/* >> + * Here follows platform specific mapping information that we can pass to >> + * the functions mapping resources to the sensors. Where the sensors have >> + * a power enable pin defined in DSDT we need to provide a supply name so >> + * the sensor drivers can find the regulator. The device name will be derived >> + * from the sensor's ACPI device within the code. Optionally, we can provide a >> + * NULL terminated array of function name mappings to deal with any platform >> + * specific deviations from the documented behaviour of GPIOs. >> + * >> + * Map a GPIO function name to NULL to prevent the driver from mapping that >> + * GPIO at all. >> + */ >> + >> +static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = { >> + { "reset", NULL }, >> + { "powerdown", "reset" }, >> + { } >> +}; >> + >> +static const struct int3472_sensor_config int3472_sensor_configs[] = { >> + /* Lenovo Miix 510-12ISK - OV2680, Front */ >> + { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps }, >> + /* Lenovo Miix 510-12ISK - OV5648, Rear */ >> + { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL }, >> + /* Surface Go 1&2 - OV5693, Front */ >> + { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL }, >> +}; >> + >> +static const struct int3472_sensor_config * >> +skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472) >> +{ >> + union acpi_object *obj; >> + unsigned int i; >> + >> + obj = acpi_evaluate_dsm_typed(int3472->sensor->handle, >> + &cio2_sensor_module_guid, 0x00, >> + 0x01, NULL, ACPI_TYPE_STRING); >> + >> + if (!obj) { >> + dev_err(int3472->dev, >> + "Failed to get sensor module string from _DSM\n"); >> + return ERR_PTR(-ENODEV); >> + } >> + >> + if (obj->string.type != ACPI_TYPE_STRING) { >> + dev_err(int3472->dev, >> + "Sensor _DSM returned a non-string value\n"); >> + >> + ACPI_FREE(obj); >> + return ERR_PTR(-EINVAL); >> + } >> + >> + for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) { >> + if (!strcmp(int3472_sensor_configs[i].sensor_module_name, >> + obj->string.pointer)) >> + break; >> + } >> + >> + ACPI_FREE(obj); >> + >> + if (i >= ARRAY_SIZE(int3472_sensor_configs)) >> + return ERR_PTR(-EINVAL); >> + >> + return &int3472_sensor_configs[i]; >> +} >> + >> +static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, >> + struct acpi_resource *ares, >> + const char *func, u32 polarity) >> +{ >> + char *path = ares->data.gpio.resource_source.string_ptr; >> + const struct int3472_sensor_config *sensor_config; >> + struct gpiod_lookup *table_entry; >> + struct acpi_device *adev; >> + acpi_handle handle; >> + acpi_status status; >> + int ret; >> + >> + if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) { >> + dev_warn(int3472->dev, "Too many GPIOs mapped\n"); >> + return -EINVAL; >> + } >> + >> + sensor_config = int3472->sensor_config; >> + if (!IS_ERR(sensor_config) && sensor_config->function_maps) { >> + const struct int3472_gpio_function_remap *remap; >> + >> + for (remap = sensor_config->function_maps; remap->documented; remap++) { >> + if (!strcmp(func, remap->documented)) { >> + func = remap->actual; >> + break; >> + } >> + } >> + } >> + >> + /* Functions mapped to NULL should not be mapped to the sensor */ >> + if (!func) >> + return 0; >> + >> + status = acpi_get_handle(NULL, path, &handle); >> + if (ACPI_FAILURE(status)) >> + return -EINVAL; >> + >> + ret = acpi_bus_get_device(handle, &adev); >> + if (ret) >> + return -ENODEV; >> + >> + table_entry = &int3472->gpios.table[int3472->n_sensor_gpios]; >> + table_entry->key = acpi_dev_name(adev); >> + table_entry->chip_hwnum = ares->data.gpio.pin_table[0]; >> + table_entry->con_id = func; >> + table_entry->idx = 0; >> + table_entry->flags = polarity; >> + >> + int3472->n_sensor_gpios++; >> + >> + return 0; >> +} >> + >> +static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472, >> + struct acpi_resource *ares, u8 type) >> +{ >> + char *path = ares->data.gpio.resource_source.string_ptr; >> + struct gpio_desc *gpio; >> + >> + switch (type) { >> + case INT3472_GPIO_TYPE_CLK_ENABLE: >> + gpio = acpi_get_and_request_gpiod(path, ares->data.gpio.pin_table[0], >> + "int3472,clk-enable"); >> + if (IS_ERR(gpio)) >> + return (PTR_ERR(gpio)); >> + >> + int3472->clock.ena_gpio = gpio; >> + break; >> + case INT3472_GPIO_TYPE_PRIVACY_LED: >> + gpio = acpi_get_and_request_gpiod(path, ares->data.gpio.pin_table[0], >> + "int3472,privacy-led"); >> + if (IS_ERR(gpio)) >> + return (PTR_ERR(gpio)); >> + >> + int3472->clock.led_gpio = gpio; >> + break; >> + default: >> + dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type); >> + break; >> + } >> + >> + return 0; >> +} >> + >> +/** >> + * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor >> + * @ares: A pointer to a &struct acpi_resource >> + * @data: A pointer to a &struct int3472_discrete_device >> + * >> + * This function handles GPIO resources that are against an INT3472 >> + * ACPI device, by checking the value of the corresponding _DSM entry. >> + * This will return a 32bit int, where the lowest byte represents the >> + * function of the GPIO pin: >> + * >> + * 0x00 Reset >> + * 0x01 Power down >> + * 0x0b Power enable >> + * 0x0c Clock enable >> + * 0x0d Privacy LED >> + * >> + * There are some known platform specific quirks where that does not quite >> + * hold up; for example where a pin with type 0x01 (Power down) is mapped to >> + * a sensor pin that performs a reset function or entries in _CRS and _DSM that >> + * do not actually correspond to a physical connection. These will be handled >> + * by the mapping sub-functions. >> + * >> + * GPIOs will either be mapped directly to the sensor device or else used >> + * to create clocks and regulators via the usual frameworks. >> + * >> + * Return: >> + * * 1 - To continue the loop >> + * * 0 - When all resources found are handled properly. >> + * * -EINVAL - If the resource is not a GPIO IO resource >> + * * -ENODEV - If the resource has no corresponding _DSM entry >> + * * -Other - Errors propagated from one of the sub-functions. >> + */ >> +static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, >> + void *data) >> +{ >> + struct int3472_discrete_device *int3472 = data; >> + struct acpi_resource_gpio *agpio; >> + union acpi_object *obj; >> + const char *err_msg; >> + int ret; >> + u8 type; >> + >> + if (!acpi_gpio_get_io_resource(ares, &agpio)) >> + return 1; >> + >> + /* >> + * ngpios + 2 because the index of this _DSM function is 1-based and >> + * the first function is just a count. >> + */ >> + obj = acpi_evaluate_dsm_typed(int3472->adev->handle, >> + &int3472_gpio_guid, 0x00, >> + int3472->ngpios + 2, >> + NULL, ACPI_TYPE_INTEGER); >> + >> + if (!obj) { >> + dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n", >> + ares->data.gpio.pin_table[0]); >> + return 1; >> + } >> + >> + type = obj->integer.value & 0xff; >> + >> + switch (type) { >> + case INT3472_GPIO_TYPE_RESET: >> + ret = skl_int3472_map_gpio_to_sensor(int3472, ares, "reset", >> + GPIO_ACTIVE_LOW); >> + if (ret) >> + err_msg = "Failed to map reset pin to sensor\n"; >> + >> + break; >> + case INT3472_GPIO_TYPE_POWERDOWN: >> + ret = skl_int3472_map_gpio_to_sensor(int3472, ares, >> + "powerdown", >> + GPIO_ACTIVE_LOW); >> + if (ret) >> + err_msg = "Failed to map powerdown pin to sensor\n"; >> + >> + break; >> + case INT3472_GPIO_TYPE_CLK_ENABLE: >> + case INT3472_GPIO_TYPE_PRIVACY_LED: >> + ret = skl_int3472_map_gpio_to_clk(int3472, ares, type); >> + if (ret) >> + err_msg = "Failed to map GPIO to clock\n"; >> + >> + break; >> + case INT3472_GPIO_TYPE_POWER_ENABLE: >> + ret = skl_int3472_register_regulator(int3472, ares); >> + if (ret) >> + err_msg = "Failed to map regulator to sensor\n"; >> + >> + break; >> + default: >> + dev_warn(int3472->dev, >> + "GPIO type 0x%02x unknown; the sensor may not work\n", >> + type); >> + ret = 1; >> + break; >> + } >> + >> + int3472->ngpios++; >> + ACPI_FREE(obj); >> + >> + if (ret) >> + return dev_err_probe(int3472->dev, ret, err_msg); >> + >> + return 0; >> +} >> + >> +static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) >> +{ >> + LIST_HEAD(resource_list); >> + int ret; >> + >> + /* >> + * No error check, because not having a sensor config is not necessarily >> + * a failure mode. >> + */ >> + int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472); >> + >> + ret = acpi_dev_get_resources(int3472->adev, &resource_list, >> + skl_int3472_handle_gpio_resources, >> + int3472); >> + if (ret) >> + goto out_free_res_list; >> + >> + /* >> + * If we find no clock enable GPIO pin then the privacy LED won't work. >> + * We've never seen that situation, but it's possible. Warn the user so >> + * it's clear what's happened. >> + */ >> + if (int3472->clock.ena_gpio) { >> + ret = skl_int3472_register_clock(int3472); >> + if (ret) >> + goto out_free_res_list; >> + } else { >> + if (int3472->clock.led_gpio) >> + dev_warn(int3472->dev, >> + "No clk GPIO. The privacy LED won't work\n"); >> + } >> + >> + int3472->gpios.dev_id = int3472->sensor_name; >> + gpiod_add_lookup_table(&int3472->gpios); >> + >> +out_free_res_list: >> + acpi_dev_free_resource_list(&resource_list); >> + >> + return ret; >> +} >> + >> +int skl_int3472_discrete_probe(struct platform_device *pdev) >> +{ >> + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); >> + struct int3472_discrete_device *int3472; >> + struct int3472_cldb cldb; >> + int ret; >> + >> + ret = skl_int3472_fill_cldb(adev, &cldb); >> + if (ret) { >> + dev_err(&pdev->dev, "Couldn't fill CLDB structure\n"); >> + return ret; >> + } >> + >> + if (cldb.control_logic_type != 1) { >> + dev_err(&pdev->dev, "Unsupported control logic type %u\n", >> + cldb.control_logic_type); >> + return -EINVAL; >> + } >> + >> + /* Max num GPIOs we've seen plus a terminator */ >> + int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table, >> + INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL); >> + if (!int3472) >> + return -ENOMEM; >> + >> + int3472->adev = adev; >> + int3472->dev = &pdev->dev; >> + platform_set_drvdata(pdev, int3472); >> + >> + int3472->sensor = acpi_dev_get_first_consumer_dev(adev); >> + if (!int3472->sensor) { >> + dev_err(&pdev->dev, "INT3472 seems to have no dependents.\n"); >> + return -ENODEV; >> + } >> + >> + int3472->sensor_name = devm_kasprintf(int3472->dev, GFP_KERNEL, >> + I2C_DEV_NAME_FORMAT, >> + acpi_dev_name(int3472->sensor)); >> + if (!int3472->sensor_name) { >> + ret = -ENOMEM; >> + goto err_put_sensor; >> + } >> + >> + /* >> + * Initialising this list means we can call gpiod_remove_lookup_table() >> + * in failure paths without issue. >> + */ >> + INIT_LIST_HEAD(&int3472->gpios.list); >> + >> + ret = skl_int3472_parse_crs(int3472); >> + if (ret) { >> + skl_int3472_discrete_remove(pdev); >> + return ret; >> + } >> + >> + return 0; >> + >> +err_put_sensor: >> + acpi_dev_put(int3472->sensor); >> + >> + return ret; >> +} >> + >> +int skl_int3472_discrete_remove(struct platform_device *pdev) >> +{ >> + struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); >> + >> + gpiod_remove_lookup_table(&int3472->gpios); >> + regulator_unregister(int3472->regulator.rdev); >> + clk_unregister(int3472->clock.clk); >> + >> + if (int3472->clock.cl) >> + clkdev_drop(int3472->clock.cl); >> + >> + gpiod_put(int3472->regulator.gpio); >> + gpiod_put(int3472->clock.ena_gpio); >> + gpiod_put(int3472->clock.led_gpio); >> + >> + return 0; >> +} >> diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c >> new file mode 100644 >> index 000000000000..6306ba24e0bc >> --- /dev/null >> +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c >> @@ -0,0 +1,137 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* Author: Dan Scally <djrscally@gmail.com> */ >> + >> +#include <linux/i2c.h> >> +#include <linux/mfd/core.h> >> +#include <linux/mfd/tps68470.h> >> +#include <linux/platform_device.h> >> +#include <linux/regmap.h> >> + >> +#include "intel_skl_int3472_common.h" >> + >> +#define DESIGNED_FOR_CHROMEOS 1 >> +#define DESIGNED_FOR_WINDOWS 2 >> + >> +static const struct mfd_cell tps68470_cros[] = { >> + { .name = "tps68470-gpio" }, >> + { .name = "tps68470_pmic_opregion" }, >> +}; >> + >> +static const struct mfd_cell tps68470_win[] = { >> + { .name = "tps68470-gpio" }, >> + { .name = "tps68470-clk" }, >> + { .name = "tps68470-regulator" }, >> +}; >> + >> +static const struct regmap_config tps68470_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + .max_register = TPS68470_REG_MAX, >> +}; >> + >> +static int tps68470_chip_init(struct device *dev, struct regmap *regmap) >> +{ >> + unsigned int version; >> + int ret; >> + >> + /* Force software reset */ >> + ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); >> + if (ret) >> + return ret; >> + >> + ret = regmap_read(regmap, TPS68470_REG_REVID, &version); >> + if (ret) { >> + dev_err(dev, "Failed to read revision register: %d\n", ret); >> + return ret; >> + } >> + >> + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); >> + >> + return 0; >> +} >> + >> +/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for >> + * @adev: A pointer to a &struct acpi_device >> + * >> + * Check CLDB buffer against the PMIC's adev. If present, then we check >> + * the value of control_logic_type field and follow one of the >> + * following scenarios: >> + * >> + * 1. No CLDB - likely ACPI tables designed for ChromeOS. We >> + * create platform devices for the GPIOs and OpRegion drivers. >> + * >> + * 2. CLDB, with control_logic_type = 2 - probably ACPI tables >> + * made for Windows 2-in-1 platforms. Register pdevs for GPIO, >> + * Clock and Regulator drivers to bind to. >> + * >> + * 3. Any other value in control_logic_type, we should never have >> + * gotten to this point; fail probe and return. >> + * >> + * Return: >> + * * 1 Device intended for ChromeOS >> + * * 2 Device intended for Windows >> + * * -EINVAL Where @adev has an object named CLDB but it does not conform to >> + * our expectations >> + */ >> +int skl_int3472_tps68470_calc_type(struct acpi_device *adev) >> +{ >> + struct int3472_cldb cldb = { 0 }; >> + int ret; >> + >> + /* >> + * A CLDB buffer that exists, but which does not match our expectations >> + * should trigger an error so we don't blindly continue. >> + */ >> + ret = skl_int3472_fill_cldb(adev, &cldb); >> + if (ret && ret != -ENODEV) >> + return ret; >> + >> + if (ret) >> + return DESIGNED_FOR_CHROMEOS; >> + >> + if (cldb.control_logic_type != 2) >> + return -EINVAL; >> + >> + return DESIGNED_FOR_WINDOWS; >> +} >> + >> +int skl_int3472_tps68470_probe(struct i2c_client *client) >> +{ >> + struct acpi_device *adev = ACPI_COMPANION(&client->dev); >> + struct regmap *regmap; >> + int device_type; >> + int ret; >> + >> + regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); >> + if (IS_ERR(regmap)) { >> + dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap)); >> + return PTR_ERR(regmap); >> + } >> + >> + i2c_set_clientdata(client, regmap); >> + >> + ret = tps68470_chip_init(&client->dev, regmap); >> + if (ret < 0) { >> + dev_err(&client->dev, "TPS68470 init error %d\n", ret); >> + return ret; >> + } >> + >> + device_type = skl_int3472_tps68470_calc_type(adev); >> + switch (device_type) { >> + case DESIGNED_FOR_WINDOWS: >> + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, >> + tps68470_win, ARRAY_SIZE(tps68470_win), >> + NULL, 0, NULL); >> + break; >> + case DESIGNED_FOR_CHROMEOS: >> + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, >> + tps68470_cros, ARRAY_SIZE(tps68470_cros), >> + NULL, 0, NULL); >> + break; >> + default: >> + dev_err(&client->dev, "Failed to add MFD devices\n"); >> + return device_type; >> + } >> + >> + return ret; >> +} >>
diff --git a/MAINTAINERS b/MAINTAINERS index 008fcad7ac00..8dcc7e005ace 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9378,6 +9378,11 @@ S: Maintained F: arch/x86/include/asm/intel_scu_ipc.h F: drivers/platform/x86/intel_scu_* +INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER +M: Daniel Scally <djrscally@gmail.com> +S: Maintained +F: drivers/platform/x86/intel-int3472/ + INTEL SPEED SELECT TECHNOLOGY M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> L: platform-driver-x86@vger.kernel.org diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2714f7c3843e..1263b8efcd50 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -697,6 +697,8 @@ config INTEL_CHT_INT33FE device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m for Type-C device. +source "drivers/platform/x86/intel-int3472/Kconfig" + config INTEL_HID_EVENT tristate "INTEL HID Event" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index dcc8cdb95b4d..c0612c02d037 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o +obj-$(CONFIG_INTEL_SKL_INT3472) += intel-int3472/ obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o # MSI diff --git a/drivers/platform/x86/intel-int3472/Kconfig b/drivers/platform/x86/intel-int3472/Kconfig new file mode 100644 index 000000000000..c112878e833b --- /dev/null +++ b/drivers/platform/x86/intel-int3472/Kconfig @@ -0,0 +1,30 @@ +config INTEL_SKL_INT3472 + tristate "Intel SkyLake ACPI INT3472 Driver" + depends on ACPI + depends on COMMON_CLK && CLKDEV_LOOKUP + depends on I2C + depends on GPIOLIB + depends on REGULATOR + select MFD_CORE + select REGMAP_I2C + help + This driver adds power controller support for the Intel SkyCam + devices found on the Intel SkyLake platforms. + + The INT3472 is a camera power controller, a logical device found on + Intel Skylake-based systems that can map to different hardware + devices depending on the platform. On machines designed for Chrome OS + it maps to a TPS68470 camera PMIC. On machines designed for Windows, + it maps to either a TP68470 camera PMIC, a uP6641Q sensor PMIC, or a + set of discrete GPIOs and power gates. + + If your device was designed for Chrome OS, this driver will provide + an ACPI OpRegion, which must be available before any of the devices + using it are probed. For this reason, you should select Y if your + device was designed for ChromeOS. For the same reason the + I2C_DESIGNWARE_PLATFORM option must be set to Y too. + + Say Y or M here if you have a SkyLake device designed for use + with Windows or ChromeOS. Say N here if you are not sure. + + The module will be named "intel-skl-int3472". diff --git a/drivers/platform/x86/intel-int3472/Makefile b/drivers/platform/x86/intel-int3472/Makefile new file mode 100644 index 000000000000..48bd97f0a04e --- /dev/null +++ b/drivers/platform/x86/intel-int3472/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_INTEL_SKL_INT3472) += intel_skl_int3472.o +intel_skl_int3472-objs := intel_skl_int3472_common.o \ + intel_skl_int3472_discrete.o \ + intel_skl_int3472_tps68470.o \ + intel_skl_int3472_clk_and_regulator.o diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c new file mode 100644 index 000000000000..ceee860e2c07 --- /dev/null +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/slab.h> + +#include "intel_skl_int3472_common.h" + +/* + * The regulators have to have .ops to be valid, but the only ops we actually + * support are .enable and .disable which are handled via .ena_gpiod. Pass an + * empty struct to clear the check without lying about capabilities. + */ +static const struct regulator_ops int3472_gpio_regulator_ops; + +static int skl_int3472_clk_prepare(struct clk_hw *hw) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + gpiod_set_value_cansleep(clk->ena_gpio, 1); + gpiod_set_value_cansleep(clk->led_gpio, 1); + + return 0; +} + +static void skl_int3472_clk_unprepare(struct clk_hw *hw) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + gpiod_set_value_cansleep(clk->ena_gpio, 0); + gpiod_set_value_cansleep(clk->led_gpio, 0); +} + +static int skl_int3472_clk_enable(struct clk_hw *hw) +{ + /* + * We're just turning a GPIO on to enable the clock, which operation + * has the potential to sleep. Given .enable() cannot sleep, but + * .prepare() can, we toggle the GPIO in .prepare() instead. Thus, + * nothing to do here. + */ + return 0; +} + +static void skl_int3472_clk_disable(struct clk_hw *hw) +{ + /* Likewise, nothing to do here... */ +} + +static unsigned int skl_int3472_get_clk_frequency(struct int3472_discrete_device *int3472) +{ + union acpi_object *obj; + unsigned int freq; + + obj = skl_int3472_get_acpi_buffer(int3472->sensor, "SSDB"); + if (IS_ERR(obj)) + return 0; /* report rate as 0 on error */ + + if (obj->buffer.length < CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET + sizeof(u32)) { + dev_err(int3472->dev, "The buffer is too small\n"); + kfree(obj); + return 0; + } + + freq = *(u32 *)(obj->buffer.pointer + CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET); + + kfree(obj); + return freq; +} + +static unsigned long skl_int3472_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct int3472_gpio_clock *clk = to_int3472_clk(hw); + + return clk->frequency; +} + +static const struct clk_ops skl_int3472_clock_ops = { + .prepare = skl_int3472_clk_prepare, + .unprepare = skl_int3472_clk_unprepare, + .enable = skl_int3472_clk_enable, + .disable = skl_int3472_clk_disable, + .recalc_rate = skl_int3472_clk_recalc_rate, +}; + +int skl_int3472_register_clock(struct int3472_discrete_device *int3472) +{ + struct clk_init_data init = { + .ops = &skl_int3472_clock_ops, + .flags = CLK_GET_RATE_NOCACHE, + }; + int ret; + + init.name = kasprintf(GFP_KERNEL, "%s-clk", + acpi_dev_name(int3472->adev)); + if (!init.name) + return -ENOMEM; + + int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472); + + int3472->clock.clk_hw.init = &init; + int3472->clock.clk = clk_register(&int3472->adev->dev, + &int3472->clock.clk_hw); + if (IS_ERR(int3472->clock.clk)) { + ret = PTR_ERR(int3472->clock.clk); + goto out_free_init_name; + } + + int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL, + int3472->sensor_name); + if (!int3472->clock.cl) { + ret = -ENOMEM; + goto err_unregister_clk; + } + + kfree(init.name); + return 0; + +err_unregister_clk: + clk_unregister(int3472->clock.clk); +out_free_init_name: + kfree(init.name); + + return ret; +} + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct acpi_resource *ares) +{ + char *path = ares->data.gpio.resource_source.string_ptr; + const struct int3472_sensor_config *sensor_config; + struct regulator_consumer_supply supply_map; + struct regulator_init_data init_data = { }; + struct regulator_config cfg = { }; + int ret; + + sensor_config = int3472->sensor_config; + if (IS_ERR(sensor_config)) { + dev_err(int3472->dev, "No sensor module config\n"); + return PTR_ERR(sensor_config); + } + + if (!sensor_config->supply_map.supply) { + dev_err(int3472->dev, "No supply name defined\n"); + return -ENODEV; + } + + init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + init_data.num_consumer_supplies = 1; + supply_map = sensor_config->supply_map; + supply_map.dev_name = int3472->sensor_name; + init_data.consumer_supplies = &supply_map; + + snprintf(int3472->regulator.regulator_name, + sizeof(int3472->regulator.regulator_name), "%s-regulator", + acpi_dev_name(int3472->adev)); + snprintf(int3472->regulator.supply_name, + GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0"); + + int3472->regulator.rdesc = INT3472_REGULATOR( + int3472->regulator.regulator_name, + int3472->regulator.supply_name, + &int3472_gpio_regulator_ops); + + int3472->regulator.gpio = acpi_get_and_request_gpiod(path, + ares->data.gpio.pin_table[0], + "int3472,regulator"); + if (IS_ERR(int3472->regulator.gpio)) { + dev_err(int3472->dev, "Failed to get regulator GPIO line\n"); + return PTR_ERR(int3472->regulator.gpio); + } + + cfg.dev = &int3472->adev->dev; + cfg.init_data = &init_data; + cfg.ena_gpiod = int3472->regulator.gpio; + + int3472->regulator.rdev = regulator_register(&int3472->regulator.rdesc, + &cfg); + if (IS_ERR(int3472->regulator.rdev)) { + ret = PTR_ERR(int3472->regulator.rdev); + goto err_free_gpio; + } + + return 0; + +err_free_gpio: + gpiod_put(int3472->regulator.gpio); + + return ret; +} diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c new file mode 100644 index 000000000000..497e74fba75f --- /dev/null +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "intel_skl_int3472_common.h" + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, char *id) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_handle handle = adev->handle; + union acpi_object *obj; + acpi_status status; + + status = acpi_evaluate_object(handle, id, NULL, &buffer); + if (ACPI_FAILURE(status)) + return ERR_PTR(-ENODEV); + + obj = buffer.pointer; + if (!obj) + return ERR_PTR(-ENODEV); + + if (obj->type != ACPI_TYPE_BUFFER) { + acpi_handle_err(handle, "%s object is not an ACPI buffer\n", id); + kfree(obj); + return ERR_PTR(-EINVAL); + } + + return obj; +} + +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb) +{ + union acpi_object *obj; + int ret; + + obj = skl_int3472_get_acpi_buffer(adev, "CLDB"); + if (IS_ERR(obj)) + return PTR_ERR(obj); + + if (obj->buffer.length > sizeof(*cldb)) { + acpi_handle_err(adev->handle, "The CLDB buffer is too large\n"); + ret = -EINVAL; + goto out_free_obj; + } + + memcpy(cldb, obj->buffer.pointer, obj->buffer.length); + ret = 0; + +out_free_obj: + kfree(obj); + return ret; +} + +static const struct acpi_device_id int3472_device_id[] = { + { "INT3472", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, int3472_device_id); + +static struct platform_driver int3472_discrete = { + .driver = { + .name = "int3472-discrete", + .acpi_match_table = int3472_device_id, + }, + .probe = skl_int3472_discrete_probe, + .remove = skl_int3472_discrete_remove, +}; + +static struct i2c_driver int3472_tps68470 = { + .driver = { + .name = "int3472-tps68470", + .acpi_match_table = int3472_device_id, + }, + .probe_new = skl_int3472_tps68470_probe, +}; + +static int skl_int3472_init(void) +{ + int ret; + + ret = platform_driver_register(&int3472_discrete); + if (ret) + return ret; + + ret = i2c_register_driver(THIS_MODULE, &int3472_tps68470); + if (ret) + platform_driver_unregister(&int3472_discrete); + + return ret; +} +module_init(skl_int3472_init); + +static void skl_int3472_exit(void) +{ + platform_driver_unregister(&int3472_discrete); + i2c_del_driver(&int3472_tps68470); +} +module_exit(skl_int3472_exit); + +MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Device Driver"); +MODULE_AUTHOR("Daniel Scally <djrscally@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h new file mode 100644 index 000000000000..6fdf78584219 --- /dev/null +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Author: Dan Scally <djrscally@gmail.com> */ + +#ifndef _INTEL_SKL_INT3472_H +#define _INTEL_SKL_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 + +#define GPIO_REGULATOR_NAME_LENGTH 21 +#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH 9 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _supply, _ops) \ + (const struct regulator_desc) { \ + .name = _name, \ + .supply_name = _supply, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_gpio_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[28]; +}; + +struct int3472_gpio_function_remap { + const char *documented; + const char *actual; +}; + +struct int3472_sensor_config { + const char *sensor_module_name; + struct regulator_consumer_supply supply_map; + const struct int3472_gpio_function_remap *function_maps; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + const struct int3472_sensor_config *sensor_config; + + struct int3472_gpio_regulator { + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH]; + struct gpio_desc *gpio; + struct regulator_dev *rdev; + struct regulator_desc rdesc; + } regulator; + + struct int3472_gpio_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + struct gpio_desc *led_gpio; + u32 frequency; + } clock; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + struct gpiod_lookup_table gpios; +}; + +int skl_int3472_discrete_probe(struct platform_device *pdev); +int skl_int3472_discrete_remove(struct platform_device *pdev); +int skl_int3472_tps68470_probe(struct i2c_client *client); +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_register_clock(struct int3472_discrete_device *int3472); +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct acpi_resource *ares); + +#endif diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c new file mode 100644 index 000000000000..8c18dbff1c43 --- /dev/null +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/acpi.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/overflow.h> +#include <linux/platform_device.h> +#include <linux/uuid.h> + +#include "intel_skl_int3472_common.h" + +/* + * 79234640-9e10-4fea-a5c1-b5aa8b19756f + * This _DSM GUID returns information about the GPIO lines mapped to a + * discrete INT3472 device. Function number 1 returns a count of the GPIO + * lines that are mapped. Subsequent functions return 32 bit ints encoding + * information about the GPIO line, including its purpose. + */ +static const guid_t int3472_gpio_guid = + GUID_INIT(0x79234640, 0x9e10, 0x4fea, + 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f); + +/* + * 822ace8f-2814-4174-a56b-5f029fe079ee + * This _DSM GUID returns a string from the sensor device, which acts as a + * module identifier. + */ +static const guid_t cio2_sensor_module_guid = + GUID_INIT(0x822ace8f, 0x2814, 0x4174, + 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee); + +/* + * Here follows platform specific mapping information that we can pass to + * the functions mapping resources to the sensors. Where the sensors have + * a power enable pin defined in DSDT we need to provide a supply name so + * the sensor drivers can find the regulator. The device name will be derived + * from the sensor's ACPI device within the code. Optionally, we can provide a + * NULL terminated array of function name mappings to deal with any platform + * specific deviations from the documented behaviour of GPIOs. + * + * Map a GPIO function name to NULL to prevent the driver from mapping that + * GPIO at all. + */ + +static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = { + { "reset", NULL }, + { "powerdown", "reset" }, + { } +}; + +static const struct int3472_sensor_config int3472_sensor_configs[] = { + /* Lenovo Miix 510-12ISK - OV2680, Front */ + { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps }, + /* Lenovo Miix 510-12ISK - OV5648, Rear */ + { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL }, + /* Surface Go 1&2 - OV5693, Front */ + { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL }, +}; + +static const struct int3472_sensor_config * +skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472) +{ + union acpi_object *obj; + unsigned int i; + + obj = acpi_evaluate_dsm_typed(int3472->sensor->handle, + &cio2_sensor_module_guid, 0x00, + 0x01, NULL, ACPI_TYPE_STRING); + + if (!obj) { + dev_err(int3472->dev, + "Failed to get sensor module string from _DSM\n"); + return ERR_PTR(-ENODEV); + } + + if (obj->string.type != ACPI_TYPE_STRING) { + dev_err(int3472->dev, + "Sensor _DSM returned a non-string value\n"); + + ACPI_FREE(obj); + return ERR_PTR(-EINVAL); + } + + for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) { + if (!strcmp(int3472_sensor_configs[i].sensor_module_name, + obj->string.pointer)) + break; + } + + ACPI_FREE(obj); + + if (i >= ARRAY_SIZE(int3472_sensor_configs)) + return ERR_PTR(-EINVAL); + + return &int3472_sensor_configs[i]; +} + +static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, + struct acpi_resource *ares, + const char *func, u32 polarity) +{ + char *path = ares->data.gpio.resource_source.string_ptr; + const struct int3472_sensor_config *sensor_config; + struct gpiod_lookup *table_entry; + struct acpi_device *adev; + acpi_handle handle; + acpi_status status; + int ret; + + if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) { + dev_warn(int3472->dev, "Too many GPIOs mapped\n"); + return -EINVAL; + } + + sensor_config = int3472->sensor_config; + if (!IS_ERR(sensor_config) && sensor_config->function_maps) { + const struct int3472_gpio_function_remap *remap; + + for (remap = sensor_config->function_maps; remap->documented; remap++) { + if (!strcmp(func, remap->documented)) { + func = remap->actual; + break; + } + } + } + + /* Functions mapped to NULL should not be mapped to the sensor */ + if (!func) + return 0; + + status = acpi_get_handle(NULL, path, &handle); + if (ACPI_FAILURE(status)) + return -EINVAL; + + ret = acpi_bus_get_device(handle, &adev); + if (ret) + return -ENODEV; + + table_entry = &int3472->gpios.table[int3472->n_sensor_gpios]; + table_entry->key = acpi_dev_name(adev); + table_entry->chip_hwnum = ares->data.gpio.pin_table[0]; + table_entry->con_id = func; + table_entry->idx = 0; + table_entry->flags = polarity; + + int3472->n_sensor_gpios++; + + return 0; +} + +static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472, + struct acpi_resource *ares, u8 type) +{ + char *path = ares->data.gpio.resource_source.string_ptr; + struct gpio_desc *gpio; + + switch (type) { + case INT3472_GPIO_TYPE_CLK_ENABLE: + gpio = acpi_get_and_request_gpiod(path, ares->data.gpio.pin_table[0], + "int3472,clk-enable"); + if (IS_ERR(gpio)) + return (PTR_ERR(gpio)); + + int3472->clock.ena_gpio = gpio; + break; + case INT3472_GPIO_TYPE_PRIVACY_LED: + gpio = acpi_get_and_request_gpiod(path, ares->data.gpio.pin_table[0], + "int3472,privacy-led"); + if (IS_ERR(gpio)) + return (PTR_ERR(gpio)); + + int3472->clock.led_gpio = gpio; + break; + default: + dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type); + break; + } + + return 0; +} + +/** + * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor + * @ares: A pointer to a &struct acpi_resource + * @data: A pointer to a &struct int3472_discrete_device + * + * This function handles GPIO resources that are against an INT3472 + * ACPI device, by checking the value of the corresponding _DSM entry. + * This will return a 32bit int, where the lowest byte represents the + * function of the GPIO pin: + * + * 0x00 Reset + * 0x01 Power down + * 0x0b Power enable + * 0x0c Clock enable + * 0x0d Privacy LED + * + * There are some known platform specific quirks where that does not quite + * hold up; for example where a pin with type 0x01 (Power down) is mapped to + * a sensor pin that performs a reset function or entries in _CRS and _DSM that + * do not actually correspond to a physical connection. These will be handled + * by the mapping sub-functions. + * + * GPIOs will either be mapped directly to the sensor device or else used + * to create clocks and regulators via the usual frameworks. + * + * Return: + * * 1 - To continue the loop + * * 0 - When all resources found are handled properly. + * * -EINVAL - If the resource is not a GPIO IO resource + * * -ENODEV - If the resource has no corresponding _DSM entry + * * -Other - Errors propagated from one of the sub-functions. + */ +static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, + void *data) +{ + struct int3472_discrete_device *int3472 = data; + struct acpi_resource_gpio *agpio; + union acpi_object *obj; + const char *err_msg; + int ret; + u8 type; + + if (!acpi_gpio_get_io_resource(ares, &agpio)) + return 1; + + /* + * ngpios + 2 because the index of this _DSM function is 1-based and + * the first function is just a count. + */ + obj = acpi_evaluate_dsm_typed(int3472->adev->handle, + &int3472_gpio_guid, 0x00, + int3472->ngpios + 2, + NULL, ACPI_TYPE_INTEGER); + + if (!obj) { + dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n", + ares->data.gpio.pin_table[0]); + return 1; + } + + type = obj->integer.value & 0xff; + + switch (type) { + case INT3472_GPIO_TYPE_RESET: + ret = skl_int3472_map_gpio_to_sensor(int3472, ares, "reset", + GPIO_ACTIVE_LOW); + if (ret) + err_msg = "Failed to map reset pin to sensor\n"; + + break; + case INT3472_GPIO_TYPE_POWERDOWN: + ret = skl_int3472_map_gpio_to_sensor(int3472, ares, + "powerdown", + GPIO_ACTIVE_LOW); + if (ret) + err_msg = "Failed to map powerdown pin to sensor\n"; + + break; + case INT3472_GPIO_TYPE_CLK_ENABLE: + case INT3472_GPIO_TYPE_PRIVACY_LED: + ret = skl_int3472_map_gpio_to_clk(int3472, ares, type); + if (ret) + err_msg = "Failed to map GPIO to clock\n"; + + break; + case INT3472_GPIO_TYPE_POWER_ENABLE: + ret = skl_int3472_register_regulator(int3472, ares); + if (ret) + err_msg = "Failed to map regulator to sensor\n"; + + break; + default: + dev_warn(int3472->dev, + "GPIO type 0x%02x unknown; the sensor may not work\n", + type); + ret = 1; + break; + } + + int3472->ngpios++; + ACPI_FREE(obj); + + if (ret) + return dev_err_probe(int3472->dev, ret, err_msg); + + return 0; +} + +static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) +{ + LIST_HEAD(resource_list); + int ret; + + /* + * No error check, because not having a sensor config is not necessarily + * a failure mode. + */ + int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472); + + ret = acpi_dev_get_resources(int3472->adev, &resource_list, + skl_int3472_handle_gpio_resources, + int3472); + if (ret) + goto out_free_res_list; + + /* + * If we find no clock enable GPIO pin then the privacy LED won't work. + * We've never seen that situation, but it's possible. Warn the user so + * it's clear what's happened. + */ + if (int3472->clock.ena_gpio) { + ret = skl_int3472_register_clock(int3472); + if (ret) + goto out_free_res_list; + } else { + if (int3472->clock.led_gpio) + dev_warn(int3472->dev, + "No clk GPIO. The privacy LED won't work\n"); + } + + int3472->gpios.dev_id = int3472->sensor_name; + gpiod_add_lookup_table(&int3472->gpios); + +out_free_res_list: + acpi_dev_free_resource_list(&resource_list); + + return ret; +} + +int skl_int3472_discrete_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3472_discrete_device *int3472; + struct int3472_cldb cldb; + int ret; + + ret = skl_int3472_fill_cldb(adev, &cldb); + if (ret) { + dev_err(&pdev->dev, "Couldn't fill CLDB structure\n"); + return ret; + } + + if (cldb.control_logic_type != 1) { + dev_err(&pdev->dev, "Unsupported control logic type %u\n", + cldb.control_logic_type); + return -EINVAL; + } + + /* Max num GPIOs we've seen plus a terminator */ + int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table, + INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL); + if (!int3472) + return -ENOMEM; + + int3472->adev = adev; + int3472->dev = &pdev->dev; + platform_set_drvdata(pdev, int3472); + + int3472->sensor = acpi_dev_get_first_consumer_dev(adev); + if (!int3472->sensor) { + dev_err(&pdev->dev, "INT3472 seems to have no dependents.\n"); + return -ENODEV; + } + + int3472->sensor_name = devm_kasprintf(int3472->dev, GFP_KERNEL, + I2C_DEV_NAME_FORMAT, + acpi_dev_name(int3472->sensor)); + if (!int3472->sensor_name) { + ret = -ENOMEM; + goto err_put_sensor; + } + + /* + * Initialising this list means we can call gpiod_remove_lookup_table() + * in failure paths without issue. + */ + INIT_LIST_HEAD(&int3472->gpios.list); + + ret = skl_int3472_parse_crs(int3472); + if (ret) { + skl_int3472_discrete_remove(pdev); + return ret; + } + + return 0; + +err_put_sensor: + acpi_dev_put(int3472->sensor); + + return ret; +} + +int skl_int3472_discrete_remove(struct platform_device *pdev) +{ + struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); + + gpiod_remove_lookup_table(&int3472->gpios); + regulator_unregister(int3472->regulator.rdev); + clk_unregister(int3472->clock.clk); + + if (int3472->clock.cl) + clkdev_drop(int3472->clock.cl); + + gpiod_put(int3472->regulator.gpio); + gpiod_put(int3472->clock.ena_gpio); + gpiod_put(int3472->clock.led_gpio); + + return 0; +} diff --git a/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c b/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c new file mode 100644 index 000000000000..6306ba24e0bc --- /dev/null +++ b/drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Author: Dan Scally <djrscally@gmail.com> */ + +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tps68470.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "intel_skl_int3472_common.h" + +#define DESIGNED_FOR_CHROMEOS 1 +#define DESIGNED_FOR_WINDOWS 2 + +static const struct mfd_cell tps68470_cros[] = { + { .name = "tps68470-gpio" }, + { .name = "tps68470_pmic_opregion" }, +}; + +static const struct mfd_cell tps68470_win[] = { + { .name = "tps68470-gpio" }, + { .name = "tps68470-clk" }, + { .name = "tps68470-regulator" }, +}; + +static const struct regmap_config tps68470_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TPS68470_REG_MAX, +}; + +static int tps68470_chip_init(struct device *dev, struct regmap *regmap) +{ + unsigned int version; + int ret; + + /* Force software reset */ + ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); + if (ret) + return ret; + + ret = regmap_read(regmap, TPS68470_REG_REVID, &version); + if (ret) { + dev_err(dev, "Failed to read revision register: %d\n", ret); + return ret; + } + + dev_info(dev, "TPS68470 REVID: 0x%02x\n", version); + + return 0; +} + +/** skl_int3472_tps68470_calc_type: Check what platform a device is designed for + * @adev: A pointer to a &struct acpi_device + * + * Check CLDB buffer against the PMIC's adev. If present, then we check + * the value of control_logic_type field and follow one of the + * following scenarios: + * + * 1. No CLDB - likely ACPI tables designed for ChromeOS. We + * create platform devices for the GPIOs and OpRegion drivers. + * + * 2. CLDB, with control_logic_type = 2 - probably ACPI tables + * made for Windows 2-in-1 platforms. Register pdevs for GPIO, + * Clock and Regulator drivers to bind to. + * + * 3. Any other value in control_logic_type, we should never have + * gotten to this point; fail probe and return. + * + * Return: + * * 1 Device intended for ChromeOS + * * 2 Device intended for Windows + * * -EINVAL Where @adev has an object named CLDB but it does not conform to + * our expectations + */ +int skl_int3472_tps68470_calc_type(struct acpi_device *adev) +{ + struct int3472_cldb cldb = { 0 }; + int ret; + + /* + * A CLDB buffer that exists, but which does not match our expectations + * should trigger an error so we don't blindly continue. + */ + ret = skl_int3472_fill_cldb(adev, &cldb); + if (ret && ret != -ENODEV) + return ret; + + if (ret) + return DESIGNED_FOR_CHROMEOS; + + if (cldb.control_logic_type != 2) + return -EINVAL; + + return DESIGNED_FOR_WINDOWS; +} + +int skl_int3472_tps68470_probe(struct i2c_client *client) +{ + struct acpi_device *adev = ACPI_COMPANION(&client->dev); + struct regmap *regmap; + int device_type; + int ret; + + regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to create regmap: %ld\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + i2c_set_clientdata(client, regmap); + + ret = tps68470_chip_init(&client->dev, regmap); + if (ret < 0) { + dev_err(&client->dev, "TPS68470 init error %d\n", ret); + return ret; + } + + device_type = skl_int3472_tps68470_calc_type(adev); + switch (device_type) { + case DESIGNED_FOR_WINDOWS: + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + tps68470_win, ARRAY_SIZE(tps68470_win), + NULL, 0, NULL); + break; + case DESIGNED_FOR_CHROMEOS: + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, + tps68470_cros, ARRAY_SIZE(tps68470_cros), + NULL, 0, NULL); + break; + default: + dev_err(&client->dev, "Failed to add MFD devices\n"); + return device_type; + } + + return ret; +}
ACPI devices with _HID INT3472 are currently matched to the tps68470 driver, however this does not cover all situations in which that _HID occurs. We've encountered three possibilities: 1. On Chrome OS devices, an ACPI device with _HID INT3472 (representing a physical TPS68470 device) that requires a GPIO and OpRegion driver 2. On devices designed for Windows, an ACPI device with _HID INT3472 (again representing a physical TPS68470 device) which requires GPIO, Clock and Regulator drivers. 3. On other devices designed for Windows, an ACPI device with _HID INT3472 which does **not** represent a physical TPS68470, and is instead used as a dummy device to group some system GPIO lines which are meant to be consumed by the sensor that is dependent on this entry. This commit adds a new module, registering a platform driver to deal with the 3rd scenario plus an i2c driver to deal with #1 and #2, by querying the CLDB buffer found against INT3472 entries to determine which is most appropriate. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> --- Changes since v4: - Some formatting and commenting tidy up - Cleared up some function exit paths to avoid gotos - Refactored skl_int3472_get_sensor_module_config() and also skl_int3472_tps68470_probe(), which involved adding a new function. Andy - I didn't look at the reg-fixed-voltage suggestion yet, but I think I covered the rest of your suggestions from v4. MAINTAINERS | 5 + drivers/platform/x86/Kconfig | 2 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/intel-int3472/Kconfig | 30 ++ drivers/platform/x86/intel-int3472/Makefile | 5 + .../intel_skl_int3472_clk_and_regulator.c | 196 ++++++++ .../intel-int3472/intel_skl_int3472_common.c | 106 +++++ .../intel-int3472/intel_skl_int3472_common.h | 118 +++++ .../intel_skl_int3472_discrete.c | 417 ++++++++++++++++++ .../intel_skl_int3472_tps68470.c | 137 ++++++ 10 files changed, 1017 insertions(+) create mode 100644 drivers/platform/x86/intel-int3472/Kconfig create mode 100644 drivers/platform/x86/intel-int3472/Makefile create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_clk_and_regulator.c create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.c create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_common.h create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_discrete.c create mode 100644 drivers/platform/x86/intel-int3472/intel_skl_int3472_tps68470.c