diff mbox

[2/2] clockevents: sun5i: Fix setup_irq init sequence

Message ID 1425564863-26399-2-git-send-email-daniel.lezcano@linaro.org
State Accepted
Commit 1096be084ac59927158ce80ff1d31c33eed0e565
Headers show

Commit Message

Daniel Lezcano March 5, 2015, 2:14 p.m. UTC 
From: Yongbae Park <yongbae2@gmail.com>

The interrupt is enabled before the handler is set. Even this bug
did not appear, it is potentially dangerous as it can lead to a
NULL pointer dereference.

Fix the error by enabling the interrupt after
clockevents_config_and_register() is called.

Cc: stable@vger.kernel.org
Signed-off-by: Yongbae Park <yongbae2@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-sun5i.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 0226844..5dcbf90 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -178,10 +178,6 @@  static void __init sun5i_timer_init(struct device_node *node)
 
 	ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
 
-	ret = setup_irq(irq, &sun5i_timer_irq);
-	if (ret)
-		pr_warn("failed to setup irq %d\n", irq);
-
 	/* Enable timer0 interrupt */
 	val = readl(timer_base + TIMER_IRQ_EN_REG);
 	writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
@@ -191,6 +187,10 @@  static void __init sun5i_timer_init(struct device_node *node)
 
 	clockevents_config_and_register(&sun5i_clockevent, rate,
 					TIMER_SYNC_TICKS, 0xffffffff);
+
+	ret = setup_irq(irq, &sun5i_timer_irq);
+	if (ret)
+		pr_warn("failed to setup irq %d\n", irq);
 }
 CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
 		       sun5i_timer_init);