diff mbox series

[v2] dt-bindings: spi: xilinx: convert to yaml

Message ID 20210605002931.858031-1-iwamatsu@nigauri.org
State Accepted
Commit 476ad3ff8952db3569a77d9ed4a067c5f0f4b733
Headers show
Series [v2] dt-bindings: spi: xilinx: convert to yaml | expand

Commit Message

Nobuhiro Iwamatsu June 5, 2021, 12:29 a.m. UTC
Convert SPI for Xilinx bindings documentation to YAML schemas.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
 v2: Use enum instead of oneOf with const.
     Add constraints to xlnx,num-ss-bits and xlnx,num-transfer-bits.

 .../devicetree/bindings/spi/spi-xilinx.txt    | 23 --------
 .../devicetree/bindings/spi/spi-xilinx.yaml   | 57 +++++++++++++++++++
 2 files changed, 57 insertions(+), 23 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-xilinx.txt
 create mode 100644 Documentation/devicetree/bindings/spi/spi-xilinx.yaml

Comments

Mark Brown June 17, 2021, 3:01 p.m. UTC | #1
On Sat, 5 Jun 2021 09:29:31 +0900, Nobuhiro Iwamatsu wrote:
> Convert SPI for Xilinx bindings documentation to YAML schemas.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] dt-bindings: spi: xilinx: convert to yaml
      commit: 476ad3ff8952db3569a77d9ed4a067c5f0f4b733

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt
deleted file mode 100644
index 5f4ed3e5c9942c..00000000000000
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt
+++ /dev/null
@@ -1,23 +0,0 @@ 
-Xilinx SPI controller Device Tree Bindings
--------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a"
-- reg			: Physical base address and size of SPI registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-
-Optional properties:
-- xlnx,num-ss-bits	 : Number of chip selects used.
-- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified
-
-Example:
-	axi_quad_spi@41e00000 {
-			compatible = "xlnx,xps-spi-2.00.a";
-			interrupt-parent = <&intc>;
-			interrupts = <0 31 1>;
-			reg = <0x41e00000 0x10000>;
-			xlnx,num-ss-bits = <0x1>;
-			xlnx,num-transfer-bits = <32>;
-	};
-
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
new file mode 100644
index 00000000000000..593f7693baceed
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -0,0 +1,57 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SPI controller Device Tree Bindings
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-spi-2.00.a
+      - xlnx,xps-spi-2.00.b
+      - xlnx,axi-quad-spi-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,num-ss-bits:
+    description: Number of chip selects used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+
+  xlnx,num-transfer-bits:
+    description: Number of bits per transfer. This will be 8 if not specified.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32]
+    default: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@41e00000 {
+      compatible = "xlnx,xps-spi-2.00.a";
+      interrupt-parent = <&intc>;
+      interrupts = <0 31 1>;
+      reg = <0x41e00000 0x10000>;
+      xlnx,num-ss-bits = <0x1>;
+      xlnx,num-transfer-bits = <32>;
+    };
+...