diff mbox series

[05/23] usb: mtu3: power down device IP by default

Message ID 1623139069-8173-6-git-send-email-chunfeng.yun@mediatek.com
State Accepted
Commit b057da6d549103268a1fcb54046b209309447ae8
Headers show
Series Add support gadget (runtime) PM | expand

Commit Message

Chunfeng Yun June 8, 2021, 7:57 a.m. UTC 
Power down device IP by default until @udc_start is called.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/mtu3/mtu3_core.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 6b5da98de648..e306b93c007d 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -921,16 +921,15 @@  int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 
 	device_init_wakeup(dev, true);
 
+	/* power down device IP for power saving by default */
+	mtu3_stop(mtu);
+
 	ret = mtu3_gadget_setup(mtu);
 	if (ret) {
 		dev_err(dev, "mtu3 gadget init failed:%d\n", ret);
 		goto gadget_err;
 	}
 
-	/* init as host mode, power down device IP for power saving */
-	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
-		mtu3_stop(mtu);
-
 	ssusb_dev_debugfs_init(ssusb);
 
 	dev_dbg(dev, " %s() done...\n", __func__);