@@ -377,6 +377,36 @@
#interrupt-cells = <2>;
};
+ sgpiom0: sgpiom@1e780500 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpiom-128";
+ reg = <0x1e780500 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ ngpios = <128>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ interrupt-controller;
+ bus-frequency = <12000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm1_default>;
+ status = "disabled";
+ };
+
+ sgpiom1: sgpiom@1e780600 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2600-sgpiom-80";
+ reg = <0x1e780600 0x100>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ ngpios = <80>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ interrupt-controller;
+ bus-frequency = <12000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgpm2_default>;
+ status = "disabled";
+ };
+
gpio1: gpio@1e780800 {
#gpio-cells = <2>;
gpio-controller;
AST2600 supports 2 SGPIO master interfaces one with 128 pins another one with 80 pins. Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> --- arch/arm/boot/dts/aspeed-g6.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)