| Message ID | 4d1c79f6f184367687f61608bb8e0f18d9121802.1623239033.git.michal.simek@xilinx.com |
|---|---|
| State | Accepted |
| Commit | 5f9a32bafce0f5f15c0d15cec8b07a83b0851cb1 |
| Headers | show |
| Series | arm64: zynqmp: Extend board description | expand |
Hi Michal, Thank you for the patch. On Wed, Jun 09, 2021 at 01:44:57PM +0200, Michal Simek wrote: > This location is used by others DTs files that's why this move. I like alphabetical order :-) > Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > > .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 22 +++++++++---------- > 1 file changed, 11 insertions(+), 11 deletions(-) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts > index dbb8bfbb5c7f..4a0f3370bf7f 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts > @@ -160,17 +160,6 @@ &dcc { > status = "okay"; > }; > > -&zynqmp_dpdma { > - status = "okay"; > -}; > - > -&zynqmp_dpsub { > - status = "okay"; > - phy-names = "dp-phy0", "dp-phy1"; > - phys = <&psgtr 1 PHY_TYPE_DP 0 3>, > - <&psgtr 0 PHY_TYPE_DP 1 3>; > -}; > - > /* fpd_dma clk 667MHz, lpd_dma 500MHz */ > &fpd_dma_chan1 { > status = "okay"; > @@ -994,3 +983,14 @@ &usb0 { > &watchdog0 { > status = "okay"; > }; > + > +&zynqmp_dpdma { > + status = "okay"; > +}; > + > +&zynqmp_dpsub { > + status = "okay"; > + phy-names = "dp-phy0", "dp-phy1"; > + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, > + <&psgtr 0 PHY_TYPE_DP 1 3>; > +}; -- Regards, Laurent Pinchart
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index dbb8bfbb5c7f..4a0f3370bf7f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -160,17 +160,6 @@ &dcc { status = "okay"; }; -&zynqmp_dpdma { - status = "okay"; -}; - -&zynqmp_dpsub { - status = "okay"; - phy-names = "dp-phy0", "dp-phy1"; - phys = <&psgtr 1 PHY_TYPE_DP 0 3>, - <&psgtr 0 PHY_TYPE_DP 1 3>; -}; - /* fpd_dma clk 667MHz, lpd_dma 500MHz */ &fpd_dma_chan1 { status = "okay"; @@ -994,3 +983,14 @@ &usb0 { &watchdog0 { status = "okay"; }; + +&zynqmp_dpdma { + status = "okay"; +}; + +&zynqmp_dpsub { + status = "okay"; + phy-names = "dp-phy0", "dp-phy1"; + phys = <&psgtr 1 PHY_TYPE_DP 0 3>, + <&psgtr 0 PHY_TYPE_DP 1 3>; +};
This location is used by others DTs files that's why this move. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-)