| Message ID | 20210612192358.62602-3-konrad.dybcio@somainline.org |
|---|---|
| State | Accepted |
| Commit | 69cdb97ef6529b6b23c81da37bab7b183af7b8ee |
| Headers | show |
| Series | [v2,1/3] arm64: dts: qcom: sm8250: Disable Adreno and Venus by default | expand |
On 6/12/21 9:23 PM, Konrad Dybcio wrote: > Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two). > They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There > also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500 > and no developers have obtained it so far (to my knowledge). > > The devices are affected by a scary UFS behaviour where sending a certain UFS > command (which is worked around on downstream) renders the device unbootable, > by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly > disabled for now. > > Downstream workaround: > https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561 > > Tested-by: Marijn Suijten <marijn.suijten@somainline.org> > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Thanks!
On Sat 12 Jun 14:23 CDT 2021, Konrad Dybcio wrote: > Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two). > They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There > also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500 > and no developers have obtained it so far (to my knowledge). > > The devices are affected by a scary UFS behaviour where sending a certain UFS > command (which is worked around on downstream) renders the device unbootable, > by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly > disabled for now. > Ouch, that's expensive paper weights. Let's hope someone can shed some light on the UFS situation. The rest looks really nice! Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thanks, Bjorn > Downstream workaround: > https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561 > > Tested-by: Marijn Suijten <marijn.suijten@somainline.org> > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > Changes since v1: > - Separate the sdhci2 pinctrl part > - Fix up some regulator settings and comments > - Add Marijn's t-b > > arch/arm64/boot/dts/qcom/Makefile | 2 + > .../qcom/sm8250-sony-xperia-edo-pdx203.dts | 15 + > .../qcom/sm8250-sony-xperia-edo-pdx206.dts | 24 + > .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 494 ++++++++++++++++++ > 4 files changed, 535 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts > create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts > create mode 100644 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 456502aeee49..a3b832d9fc0c 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -73,5 +73,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts > new file mode 100644 > index 000000000000..79afeb07f4a2 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts > @@ -0,0 +1,15 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> > + */ > + > +/dts-v1/; > + > +#include "sm8250-sony-xperia-edo.dtsi" > + > +/ { > + model = "Sony Xperia 1 II"; > + compatible = "sony,pdx203-generic", "qcom,sm8250"; > +}; > + > +/delete-node/ &vreg_l7f_1p8; > diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts > new file mode 100644 > index 000000000000..999b662f4679 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts > @@ -0,0 +1,24 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> > + */ > + > +/dts-v1/; > + > +#include "sm8250-sony-xperia-edo.dtsi" > + > +/ { > + model = "Sony Xperia 5 II"; > + compatible = "sony,pdx206-generic", "qcom,sm8250"; > +}; > + > +&framebuffer { > + width = <1080>; > + height = <2520>; > + stride = <(1080 * 4)>; > +}; > + > +&vreg_l2f_1p3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi > new file mode 100644 > index 000000000000..df251b51b106 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi > @@ -0,0 +1,494 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> > + */ > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm8250.dtsi" > +#include "pm8150.dtsi" > +#include "pm8150b.dtsi" > +#include "pm8150l.dtsi" > +#include "pm8009.dtsi" > + > +/delete-node/ &adsp_mem; > +/delete-node/ &spss_mem; > +/delete-node/ &cdsp_secure_heap; > + > +/ { > + qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ > + qcom,board-id = <0x10008 0>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer: framebuffer@9c000000 { > + compatible = "simple-framebuffer"; > + reg = <0 0x9c000000 0 0x2300000>; > + width = <1644>; > + height = <3840>; > + stride = <(1644 * 4)>; > + format = "a8r8g8b8"; > + /* > + * That's a lot of clocks, but it's necessary due > + * to unused clk cleanup & no panel driver yet.. > + */ > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>; > + power-domains = <&dispcc MDSS_GDSC>; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + }; > + > + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ > + vreg_s6c_0p88: smpc6-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s6c_0p88"; > + > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-always-on; > + vin-supply = <&vph_pwr>; > + }; > + > + reserved-memory { > + adsp_mem: memory@8a100000 { > + reg = <0x0 0x8a100000 0x0 0x2500000>; > + no-map; > + }; > + > + spss_mem: memory@8c600000 { > + reg = <0x0 0x8c600000 0x0 0x100000>; > + no-map; > + }; > + > + cdsp_secure_heap: memory@8c700000 { > + reg = <0x0 0x8c700000 0x0 0x4600000>; > + no-map; > + }; > + > + cont_splash_mem: memory@9c000000 { > + reg = <0x0 0x9c000000 0x0 0x2300000>; > + no-map; > + }; > + > + ramoops@ffc00000 { > + compatible = "ramoops"; > + reg = <0x0 0xffc00000 0x0 0x100000>; > + record-size = <0x1000>; > + console-size = <0x40000>; > + msg-size = <0x20000 0x20000>; > + ecc-size = <16>; > + no-map; > + }; > + }; > +}; > + > +&apps_rsc { > + pm8150-rpmh-regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; > + vdd-l2-l10-supply = <&vreg_bob>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>; > + vdd-l6-l9-supply = <&vreg_s8c_1p2>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; > + vdd-l13-l16-l17-supply = <&vreg_bob>; > + > + /* (S1+S2+S3) - cx.lvl (ARC) */ > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5a_1p9: smps5 { > + regulator-name = "vreg_s5a_1p9"; > + regulator-min-microvolt = <1824000>; > + regulator-max-microvolt = <2040000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s6a_0p6: smps6 { > + regulator-name = "vreg_s6a_0p6"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <1128000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2a_3p1: ldo2 { > + regulator-name = "vreg_l2a_3p1"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3a_0p9: ldo3 { > + regulator-name = "vreg_l3a_0p9"; > + regulator-min-microvolt = <928000>; > + regulator-max-microvolt = <932000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L4 - lmx.lvl (ARC) */ > + > + vreg_l5a_0p88: ldo5 { > + regulator-name = "vreg_l5a_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6a_1p2: ldo6 { > + regulator-name = "vreg_l6a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L7 is unused. */ > + > + vreg_l9a_1p2: ldo9 { > + regulator-name = "vreg_l9a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L10 is unused, L11 - lcx.lvl (ARC) */ > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L13 is unused. */ > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L15 & L16 are unused. */ > + > + vreg_l17a_3p0: ldo17 { > + regulator-name = "vreg_l17a_3p0"; > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l18a_0p9: ldo18 { > + regulator-name = "vreg_l18a_0p9"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + /* > + * Remaining regulators that are not yet supported: > + * OLEDB: 4925000-8100000 > + * ab: 4600000-6100000 > + * ibb: 800000-5400000 > + */ > + pm8150l-rpmh-regulators { > + compatible = "qcom,pm8150l-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-l1-l8-supply = <&vreg_s4a_1p8>; > + vdd-l2-l3-supply = <&vreg_s8c_1p2>; > + vdd-l4-l5-l6-supply = <&vreg_bob>; > + vdd-l7-l11-supply = <&vreg_bob>; > + vdd-l9-l10-supply = <&vreg_bob>; > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_bob: bob { > + regulator-name = "vreg_bob"; > + regulator-min-microvolt = <3350000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + }; > + > + /* > + * S1-S6 are ARCs: > + * (S1+S2) - gfx.lvl, > + * S3 - mx.lvl, > + * (S4+S5) - mmcx.lvl, > + * S6 - ebi.lvl > + */ > + > + vreg_s7c_0p35: smps7 { > + regulator-name = "vreg_s7c_0p35"; > + regulator-min-microvolt = <348000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s8c_1p2: smps8 { > + regulator-name = "vreg_s8c_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1400000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-name = "vreg_l1c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L2-4 are unused. */ > + > + vreg_l5c_1p8: ldo5 { > + regulator-name = "vreg_l5c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c_2p9: ldo6 { > + regulator-name = "vreg_l6c_2p9"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; > + > + vreg_l7c_2p85: ldo7 { > + regulator-name = "vreg_l7c_2p85"; > + regulator-min-microvolt = <2856000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-name = "vreg_l8c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c_2p9: ldo9 { > + regulator-name = "vreg_l9c_2p9"; > + regulator-min-microvolt = <2704000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; > + > + vreg_l10c_3p3: ldo10 { > + regulator-name = "vreg_l10c_3p3"; > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3296000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_3p0: ldo11 { > + regulator-name = "vreg_l11c_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8009-rpmh-regulators { > + compatible = "qcom,pm8009-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vreg_bob>; > + vdd-l2-supply = <&vreg_s8c_1p2>; > + vdd-l5-l6-supply = <&vreg_bob>; > + vdd-l7-supply = <&vreg_s4a_1p8>; > + > + vreg_s1f_1p2: smps1 { > + regulator-name = "vreg_s1f_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2f_0p5: smps2 { > + regulator-name = "vreg_s2f_0p5"; > + regulator-min-microvolt = <512000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L1 is unused. */ > + > + vreg_l2f_1p3: ldo2 { > + regulator-name = "vreg_l2f_1p3"; > + regulator-min-microvolt = <1304000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L3 & L4 are unused. */ > + > + vreg_l5f_2p8: ldo5 { > + regulator-name = "vreg_l5f_2p85"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6f_2p8: ldo6 { > + regulator-name = "vreg_l6f_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7f_1p8: ldo7 { > + regulator-name = "vreg_l7f_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > + clock-frequency = <400000>; > + > + /* NXP PN553 NFC @ 28 */ > +}; > + > +&i2c2 { > + status = "okay"; > + clock-frequency = <1000000>; > + > + /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ > +}; > + > +&i2c5 { > + status = "okay"; > + clock-frequency = <400000>; > + > + /* Dialog SLG51000 CMIC @ 75 */ > +}; > + > +&i2c9 { > + status = "okay"; > + clock-frequency = <400000>; > + > + /* AMS TCS3490 RGB+IR color sensor @ 72 */ > +}; > + > +&i2c13 { > + status = "okay"; > + clock-frequency = <400000>; > + > + /* Samsung touchscreen @ 48 */ > +}; > + > +&i2c15 { > + status = "okay"; > + clock-frequency = <400000>; > + > + /* Qcom SMB1390 @ 10 */ > + /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ > + /* Qcom SMB1390_slave @ 18 */ > + /* HALO HL6111R Qi charger @ 25 */ > + /* Richwave RTC6226 FM Radio Receiver @ 64 */ > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&qupv3_id_2 { > + status = "okay"; > +}; > + > +&sdhc_2 { > + status = "okay"; > + > + vmmc-supply = <&vreg_l9c_2p9>; > + vqmmc-supply = <&vreg_l6c_2p9>; > + bus-width = <4>; > + no-sdio; > + no-emmc; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <40 4>, <52 4>; > +}; > + > +&uart12 { > + status = "okay"; > +}; > + > +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ > +&ufs_mem_hc { status = "disabled"; }; > +&ufs_mem_phy { status = "disabled"; }; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > +}; > + > +&usb_1_hsphy { > + status = "okay"; > + > + vdda-pll-supply = <&vreg_l5a_0p88>; > + vdda18-supply = <&vreg_l12a_1p8>; > + vdda33-supply = <&vreg_l2a_3p1>; > +}; > + > +&usb_1_qmpphy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l9a_1p2>; > + vdda-pll-supply = <&vreg_l18a_0p9>; > +}; > -- > 2.32.0 >
On 16.06.2021 01:45, Bjorn Andersson wrote: > On Sat 12 Jun 14:23 CDT 2021, Konrad Dybcio wrote: > >> Add support for SONY Xperia 1 II and 5 II smartphones (read one/five mark two). >> They are based on the Qualcomm SM8250 chipset and both feature 5G modems. There >> also exists a third Edo board, namely the Xperia PRO (PDX204), but it's $2500 >> and no developers have obtained it so far (to my knowledge). >> >> The devices are affected by a scary UFS behaviour where sending a certain UFS >> command (which is worked around on downstream) renders the device unbootable, >> by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly >> disabled for now. >> > Ouch, that's expensive paper weights. Let's hope someone can shed some > light on the UFS situation. Angelo expressed his concerns here [1], and is trying to resolve the situation in a sane(-ish, it's not possible for it to be completely sane..) way. Hopefully more updates can follow suit and we won't have to stick to SD cards forever.. [1] https://lkml.org/lkml/2021/6/11/1114 Konrad
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 456502aeee49..a3b832d9fc0c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -73,5 +73,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts new file mode 100644 index 000000000000..79afeb07f4a2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 1 II"; + compatible = "sony,pdx203-generic", "qcom,sm8250"; +}; + +/delete-node/ &vreg_l7f_1p8; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts new file mode 100644 index 000000000000..999b662f4679 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +/dts-v1/; + +#include "sm8250-sony-xperia-edo.dtsi" + +/ { + model = "Sony Xperia 5 II"; + compatible = "sony,pdx206-generic", "qcom,sm8250"; +}; + +&framebuffer { + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; +}; + +&vreg_l2f_1p3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi new file mode 100644 index 000000000000..df251b51b106 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -0,0 +1,494 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &spss_mem; +/delete-node/ &cdsp_secure_heap; + +/ { + qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x10008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + width = <1644>; + height = <3840>; + stride = <(1644 * 4)>; + format = "a8r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>; + power-domains = <&dispcc MDSS_GDSC>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + adsp_mem: memory@8a100000 { + reg = <0x0 0x8a100000 0x0 0x2500000>; + no-map; + }; + + spss_mem: memory@8c600000 { + reg = <0x0 0x8c600000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: memory@8c700000 { + reg = <0x0 0x8c700000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>; + vdd-l6-l9-supply = <&vreg_s8c_1p2>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1824000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p6: smps6 { + regulator-name = "vreg_s6a_0p6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p2>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p2: smps8 { + regulator-name = "vreg_s8c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3296000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p2>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* NXP PN553 NFC @ 28 */ +}; + +&i2c2 { + status = "okay"; + clock-frequency = <1000000>; + + /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + status = "okay"; + clock-frequency = <400000>; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c13 { + status = "okay"; + clock-frequency = <400000>; + + /* Samsung touchscreen @ 48 */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1390 @ 10 */ + /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ + /* Qcom SMB1390_slave @ 18 */ + /* HALO HL6111R Qi charger @ 25 */ + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + bus-width = <4>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>, <52 4>; +}; + +&uart12 { + status = "okay"; +}; + +/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ +&ufs_mem_hc { status = "disabled"; }; +&ufs_mem_phy { status = "disabled"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +};