@@ -48,7 +48,7 @@ CONFIG_CMDLINE="console=ttyAMA0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
CONFIG_CPU_IDLE=y
-CONFIG_ARM64_CPUIDLE=y
+CONFIG_ARM_CPUIDLE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -29,15 +29,10 @@ config DT_IDLE_STATES
bool
menu "ARM CPU Idle Drivers"
-depends on ARM
+depends on ARM || ARM64
source "drivers/cpuidle/Kconfig.arm"
endmenu
-menu "ARM64 CPU Idle Drivers"
-depends on ARM64
-source "drivers/cpuidle/Kconfig.arm64"
-endmenu
-
menu "MIPS CPU Idle Drivers"
depends on MIPS
source "drivers/cpuidle/Kconfig.mips"
@@ -1,10 +1,20 @@
#
# ARM CPU Idle drivers
#
+config ARM_CPUIDLE
+ bool "Generic ARM/ARM64 CPU idle Driver"
+ select DT_IDLE_STATES
+ help
+ Select this to enable generic cpuidle driver for ARM.
+ It provides a generic idle driver whose idle states are configured
+ at run-time through DT nodes. The CPUidle suspend backend is
+ initialized by calling the CPU operations init idle hook
+ provided by architecture code.
+
config ARM_BIG_LITTLE_CPUIDLE
bool "Support for ARM big.LITTLE processors"
depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS
- depends on MCPM
+ depends on MCPM && !ARM64
select ARM_CPU_SUSPEND
select CPU_IDLE_MULTIPLE_DRIVERS
select DT_IDLE_STATES
@@ -16,51 +26,51 @@ config ARM_BIG_LITTLE_CPUIDLE
config ARM_CLPS711X_CPUIDLE
bool "CPU Idle Driver for CLPS711X processors"
- depends on ARCH_CLPS711X || COMPILE_TEST
+ depends on ARCH_CLPS711X && !ARM64 || COMPILE_TEST
help
Select this to enable cpuidle on Cirrus Logic CLPS711X SOCs.
config ARM_HIGHBANK_CPUIDLE
bool "CPU Idle Driver for Calxeda processors"
- depends on ARM_PSCI
+ depends on ARM_PSCI && !ARM64
select ARM_CPU_SUSPEND
help
Select this to enable cpuidle on Calxeda processors.
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
- depends on MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD && !ARM64
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
config ARM_ZYNQ_CPUIDLE
bool "CPU Idle Driver for Xilinx Zynq processors"
- depends on ARCH_ZYNQ
+ depends on ARCH_ZYNQ && !ARM64
help
Select this to enable cpuidle on Xilinx Zynq processors.
config ARM_U8500_CPUIDLE
bool "Cpu Idle Driver for the ST-E u8500 processors"
- depends on ARCH_U8500
+ depends on ARCH_U8500 && !ARM64
help
Select this to enable cpuidle for ST-E u8500 processors
config ARM_AT91_CPUIDLE
bool "Cpu Idle Driver for the AT91 processors"
default y
- depends on ARCH_AT91
+ depends on ARCH_AT91 && !ARM64
help
Select this to enable cpuidle for AT91 processors
config ARM_EXYNOS_CPUIDLE
bool "Cpu Idle Driver for the Exynos processors"
- depends on ARCH_EXYNOS
+ depends on ARCH_EXYNOS && !ARM64
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
help
Select this to enable cpuidle for Exynos processors
config ARM_MVEBU_V7_CPUIDLE
bool "CPU Idle Driver for mvebu v7 family processors"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU && !ARM64
help
Select this to enable cpuidle on Armada 370, 38x and XP processors.
deleted file mode 100644
@@ -1,13 +0,0 @@
-#
-# ARM64 CPU Idle drivers
-#
-
-config ARM64_CPUIDLE
- bool "Generic ARM64 CPU idle Driver"
- select DT_IDLE_STATES
- help
- Select this to enable generic cpuidle driver for ARM64.
- It provides a generic idle driver whose idle states are configured
- at run-time through DT nodes. The CPUidle suspend backend is
- initialized by calling the CPU operations init idle hook
- provided by architecture code.
@@ -17,16 +17,13 @@ obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o
obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o
obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o
obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o
+obj-$(CONFIG_ARM_CPUIDLE) += cpuidle-arm.o
###############################################################################
# MIPS drivers
obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o
###############################################################################
-# ARM64 drivers
-obj-$(CONFIG_ARM64_CPUIDLE) += cpuidle-arm64.o
-
-###############################################################################
# POWERPC drivers
obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o
obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o
new file mode 100644
@@ -0,0 +1,122 @@
+/*
+ * ARM/ARM64 generic CPU idle driver.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "CPUidle arm: " fmt
+
+#include <linux/cpuidle.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_pm.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/cpuidle.h>
+
+#include "dt_idle_states.h"
+
+/*
+ * arm_enter_idle_state - Programs CPU to enter the specified state
+ *
+ * dev: cpuidle device
+ * drv: cpuidle driver
+ * idx: state index
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int arm_enter_idle_state(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int idx)
+{
+ int ret;
+
+ if (!idx) {
+ cpu_do_idle();
+ return idx;
+ }
+
+ ret = cpu_pm_enter();
+ if (!ret) {
+ /*
+ * Pass idle state index to cpu_suspend which in turn will
+ * call the CPU ops suspend protocol with idle index as a
+ * parameter.
+ */
+ arm_cpuidle_suspend(idx);
+
+ cpu_pm_exit();
+ }
+
+ return ret ? -1 : idx;
+}
+
+static struct cpuidle_driver arm_idle_driver = {
+ .name = "arm_idle",
+ .owner = THIS_MODULE,
+ /*
+ * State at index 0 is standby wfi and considered standard
+ * on all ARM platforms. If in some platforms simple wfi
+ * can't be used as "state 0", DT bindings must be implemented
+ * to work around this issue and allow installing a special
+ * handler for idle state index 0.
+ */
+ .states[0] = {
+ .enter = arm_enter_idle_state,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .power_usage = UINT_MAX,
+ .name = "WFI",
+ .desc = "ARM WFI",
+ }
+};
+
+static const struct of_device_id arm_idle_state_match[] __initconst = {
+ { .compatible = "arm,idle-state",
+ .data = arm_enter_idle_state },
+ { },
+};
+
+/*
+ * arm_idle_init
+ *
+ * Registers the arm specific cpuidle driver with the cpuidle
+ * framework. It relies on core code to parse the idle states
+ * and initialize them using driver data structures accordingly.
+ */
+static int __init arm_idle_init(void)
+{
+ int cpu, ret;
+ struct cpuidle_driver *drv = &arm_idle_driver;
+
+ /*
+ * Initialize idle states data, starting at index 1.
+ * This driver is DT only, if no DT idle states are detected (ret == 0)
+ * let the driver initialization fail accordingly since there is no
+ * reason to initialize the idle driver if only wfi is supported.
+ */
+ ret = dt_init_idle_driver(drv, arm_idle_state_match, 1);
+ if (ret <= 0)
+ return ret ? : -ENODEV;
+
+ /*
+ * Call arch CPU operations in order to initialize
+ * idle states suspend back-end specific data
+ */
+ for_each_possible_cpu(cpu) {
+ ret = arm_cpuidle_init(cpu);
+ if (ret) {
+ pr_err("CPU %d failed to init idle CPU ops\n", cpu);
+ return ret;
+ }
+ }
+
+ return cpuidle_register(drv, NULL);
+}
+device_initcall(arm_idle_init);
deleted file mode 100644
@@ -1,122 +0,0 @@
-/*
- * ARM/ARM64 generic CPU idle driver.
- *
- * Copyright (C) 2014 ARM Ltd.
- * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "CPUidle arm: " fmt
-
-#include <linux/cpuidle.h>
-#include <linux/cpumask.h>
-#include <linux/cpu_pm.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-
-#include <asm/cpuidle.h>
-
-#include "dt_idle_states.h"
-
-/*
- * arm_enter_idle_state - Programs CPU to enter the specified state
- *
- * dev: cpuidle device
- * drv: cpuidle driver
- * idx: state index
- *
- * Called from the CPUidle framework to program the device to the
- * specified target state selected by the governor.
- */
-static int arm_enter_idle_state(struct cpuidle_device *dev,
- struct cpuidle_driver *drv, int idx)
-{
- int ret;
-
- if (!idx) {
- cpu_do_idle();
- return idx;
- }
-
- ret = cpu_pm_enter();
- if (!ret) {
- /*
- * Pass idle state index to cpu_suspend which in turn will
- * call the CPU ops suspend protocol with idle index as a
- * parameter.
- */
- arm_cpuidle_suspend(idx);
-
- cpu_pm_exit();
- }
-
- return ret ? -1 : idx;
-}
-
-static struct cpuidle_driver arm_idle_driver = {
- .name = "arm_idle",
- .owner = THIS_MODULE,
- /*
- * State at index 0 is standby wfi and considered standard
- * on all ARM platforms. If in some platforms simple wfi
- * can't be used as "state 0", DT bindings must be implemented
- * to work around this issue and allow installing a special
- * handler for idle state index 0.
- */
- .states[0] = {
- .enter = arm_enter_idle_state,
- .exit_latency = 1,
- .target_residency = 1,
- .power_usage = UINT_MAX,
- .name = "WFI",
- .desc = "ARM WFI",
- }
-};
-
-static const struct of_device_id arm_idle_state_match[] __initconst = {
- { .compatible = "arm,idle-state",
- .data = arm_enter_idle_state },
- { },
-};
-
-/*
- * arm_idle_init
- *
- * Registers the arm specific cpuidle driver with the cpuidle
- * framework. It relies on core code to parse the idle states
- * and initialize them using driver data structures accordingly.
- */
-static int __init arm_idle_init(void)
-{
- int cpu, ret;
- struct cpuidle_driver *drv = &arm_idle_driver;
-
- /*
- * Initialize idle states data, starting at index 1.
- * This driver is DT only, if no DT idle states are detected (ret == 0)
- * let the driver initialization fail accordingly since there is no
- * reason to initialize the idle driver if only wfi is supported.
- */
- ret = dt_init_idle_driver(drv, arm_idle_state_match, 1);
- if (ret <= 0)
- return ret ? : -ENODEV;
-
- /*
- * Call arch CPU operations in order to initialize
- * idle states suspend back-end specific data
- */
- for_each_possible_cpu(cpu) {
- ret = arm_cpuidle_init(cpu);
- if (ret) {
- pr_err("CPU %d failed to init idle CPU ops\n", cpu);
- return ret;
- }
- }
-
- return cpuidle_register(drv, NULL);
-}
-device_initcall(arm_idle_init);