diff mbox series

[2/2] ASoC: rt711: add two jack detection modes

Message ID 20210617090822.16960-1-shumingf@realtek.com
State Accepted
Commit 683b0df26c3333a5c020a2764b71a70d082c1c61
Headers show
Series [1/2] ASoC: rt711: remap buttons | expand

Commit Message

Shuming [θŒƒζ›ΈιŠ˜] June 17, 2021, 9:08 a.m. UTC 
From: Shuming Fan <shumingf@realtek.com>

Some boards use different circuits for jack detection.
This patch adds two modes as below
1. JD2/2 ports/external resister 100k
2. JD2/1 port/JD voltage 1.8V

Signed-off-by: Shuming Fan <shumingf@realtek.com>
---
 sound/soc/codecs/rt711-sdw.h |  2 ++
 sound/soc/codecs/rt711.c     | 30 ++++++++++++++++++++++++++++++
 sound/soc/codecs/rt711.h     | 29 ++++++++++++++++++++++++++++-
 3 files changed, 60 insertions(+), 1 deletion(-)

Comments

Mark Brown June 21, 2021, 6:45 p.m. UTC | #1 
On Thu, 17 Jun 2021 17:08:22 +0800, shumingf@realtek.com wrote:
> Some boards use different circuits for jack detection.
> This patch adds two modes as below
> 1. JD2/2 ports/external resister 100k
> 2. JD2/1 port/JD voltage 1.8V

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[2/2] ASoC: rt711: add two jack detection modes
      commit: 683b0df26c3333a5c020a2764b71a70d082c1c61

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/rt711-sdw.h b/sound/soc/codecs/rt711-sdw.h
index 43b2b984b29c..6acf9858330d 100644
--- a/sound/soc/codecs/rt711-sdw.h
+++ b/sound/soc/codecs/rt711-sdw.h
@@ -267,7 +267,9 @@  static const struct reg_default rt711_reg_defaults[] = {
 	{ 0x8393, 0x00 },
 	{ 0x7319, 0x00 },
 	{ 0x8399, 0x00 },
+	{ 0x752008, 0xa807 },
 	{ 0x752009, 0x1029 },
+	{ 0x75200b, 0x7770 },
 	{ 0x752011, 0x007a },
 	{ 0x75201a, 0x8003 },
 	{ 0x752045, 0x5289 },
diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c
index c3a82b462a93..301c7ab27878 100644
--- a/sound/soc/codecs/rt711.c
+++ b/sound/soc/codecs/rt711.c
@@ -389,6 +389,36 @@  static void rt711_jack_init(struct rt711_priv *rt711)
 				RT711_HP_JD_FINAL_RESULT_CTL_JD12,
 				RT711_HP_JD_FINAL_RESULT_CTL_JD12);
 			break;
+		case RT711_JD2_100K:
+			rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG,
+				RT711_JD_CTL2, RT711_JD2_2PORT_100K_DECODE | RT711_JD2_1PORT_TYPE_DECODE |
+				RT711_HP_JD_SEL_JD2 | RT711_JD1_2PORT_TYPE_100K_DECODE,
+				RT711_JD2_2PORT_100K_DECODE_HP | RT711_JD2_1PORT_JD_HP |
+				RT711_HP_JD_SEL_JD2 | RT711_JD1_2PORT_JD_RESERVED);
+			rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG,
+				RT711_CC_DET1,
+				RT711_HP_JD_FINAL_RESULT_CTL_JD12,
+				RT711_HP_JD_FINAL_RESULT_CTL_JD12);
+			break;
+		case RT711_JD2_1P8V_1PORT:
+			rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG,
+				RT711_JD_CTL1, RT711_JD2_DIGITAL_JD_MODE_SEL,
+				RT711_JD2_1_JD_MODE);
+			rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG,
+				RT711_JD_CTL2, RT711_JD2_1PORT_TYPE_DECODE |
+				RT711_HP_JD_SEL_JD2,
+				RT711_JD2_1PORT_JD_HP |
+				RT711_HP_JD_SEL_JD2);
+			rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG,
+				RT711_JD_CTL4, RT711_JD2_PAD_PULL_UP_MASK |
+				RT711_JD2_MODE_SEL_MASK,
+				RT711_JD2_PAD_PULL_UP |
+				RT711_JD2_MODE2_1P8V_1PORT);
+			rt711_index_update_bits(rt711->regmap, RT711_VENDOR_REG,
+				RT711_CC_DET1,
+				RT711_HP_JD_FINAL_RESULT_CTL_JD12,
+				RT711_HP_JD_FINAL_RESULT_CTL_JD12);
+			break;
 		default:
 			dev_warn(rt711->component->dev, "Wrong JD source\n");
 			break;
diff --git a/sound/soc/codecs/rt711.h b/sound/soc/codecs/rt711.h
index ca0f581feec7..5f2ba1341085 100644
--- a/sound/soc/codecs/rt711.h
+++ b/sound/soc/codecs/rt711.h
@@ -52,7 +52,9 @@  struct sdw_stream_data {
 
 /* Index (NID:20h) */
 #define RT711_DAC_DC_CALI_CTL1				0x00
+#define RT711_JD_CTL1				0x08
 #define RT711_JD_CTL2				0x09
+#define RT711_JD_CTL4				0x0b
 #define RT711_CC_DET1				0x11
 #define RT711_PARA_VERB_CTL				0x1a
 #define RT711_COMBO_JACK_AUTO_CTL1				0x45
@@ -171,10 +173,33 @@  struct sdw_stream_data {
 /* DAC DC offset calibration control-1 (0x00)(NID:20h) */
 #define RT711_DAC_DC_CALI_TRIGGER (0x1 << 15)
 
+/* jack detect control 1 (0x08)(NID:20h) */
+#define RT711_JD2_DIGITAL_JD_MODE_SEL (0x1 << 1)
+#define RT711_JD2_1_JD_MODE (0x0 << 1)
+#define RT711_JD2_2_JD_MODE (0x1 << 1)
+
 /* jack detect control 2 (0x09)(NID:20h) */
 #define RT711_JD2_2PORT_200K_DECODE_HP (0x1 << 13)
+#define RT711_JD2_2PORT_100K_DECODE (0x1 << 12)
+#define RT711_JD2_2PORT_100K_DECODE_HP (0x0 << 12)
 #define RT711_HP_JD_SEL_JD1 (0x0 << 1)
 #define RT711_HP_JD_SEL_JD2 (0x1 << 1)
+#define RT711_JD2_1PORT_TYPE_DECODE (0x3 << 10)
+#define RT711_JD2_1PORT_JD_LINE2 (0x0 << 10)
+#define RT711_JD2_1PORT_JD_HP (0x1 << 10)
+#define RT711_JD2_1PORT_JD_LINE1 (0x2 << 10)
+#define RT711_JD1_2PORT_TYPE_100K_DECODE (0x1 << 0)
+#define RT711_JD1_2PORT_JD_RESERVED (0x0 << 0)
+#define RT711_JD1_2PORT_JD_LINE1 (0x1 << 0)
+
+/* jack detect control 4 (0x0b)(NID:20h) */
+#define RT711_JD2_PAD_PULL_UP_MASK (0x1 << 3)
+#define RT711_JD2_PAD_NOT_PULL_UP (0x0 << 3)
+#define RT711_JD2_PAD_PULL_UP (0x1 << 3)
+#define RT711_JD2_MODE_SEL_MASK (0x3 << 0)
+#define RT711_JD2_MODE0_2PORT (0x0 << 0)
+#define RT711_JD2_MODE1_3P3V_1PORT (0x1 << 0)
+#define RT711_JD2_MODE2_1P8V_1PORT (0x2 << 0)
 
 /* CC DET1 (0x11)(NID:20h) */
 #define RT711_HP_JD_FINAL_RESULT_CTL_JD12 (0x1 << 10)
@@ -215,7 +240,9 @@  enum {
 enum rt711_jd_src {
 	RT711_JD_NULL,
 	RT711_JD1,
-	RT711_JD2
+	RT711_JD2,
+	RT711_JD2_100K,
+	RT711_JD2_1P8V_1PORT
 };
 
 int rt711_io_init(struct device *dev, struct sdw_slave *slave);