@@ -1669,4 +1669,18 @@ config GPIO_MOCKUP
endmenu
+comment "Other GPIO expanders"
+
+config GPIO_CASCADE
+ tristate "General GPIO cascade"
+ depends on OF_GPIO
+ select MULTIPLEXER
+ select MUX_GPIO
+ help
+ Say yes here to enable support for generic GPIO cascade.
+
+ This allows building one-to-many cascades of GPIO lines using
+ different types of multiplexers readily available. At the
+ moment only input lines are supported.
+
endif
@@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o
+obj-$(CONFIG_GPIO_CASCADE) += gpio-cascade.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
new file mode 100644
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A generic GPIO cascade driver
+ *
+ * Copyright (C) 2021 Mauri Sandberg <maukka@ext.kapsi.fi>
+ *
+ * This allows building cascades of GPIO lines in a manner illustrated
+ * below:
+ *
+ * /|---- Cascaded GPIO line 0
+ * Upstream | |---- Cascaded GPIO line 1
+ * GPIO line ----+ | .
+ * | | .
+ * \|---- Cascaded GPIO line n
+ *
+ * A gpio-mux is being used to select, which cascaded line is being
+ * addressed at any given time.
+ *
+ * At the moment only input mode is supported due to lack of means for
+ * testing output functionality. At least theoretically output should be
+ * possible with an open drain constructions.
+ */
+
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mux/consumer.h>
+
+struct gpio_cascade {
+ struct device *parent;
+ struct gpio_chip gpio_chip;
+ struct mux_control *mux_control;
+ struct gpio_desc *upstream_line;
+};
+
+static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc)
+{
+ return container_of(gc, struct gpio_cascade, gpio_chip);
+}
+
+static int gpio_cascade_get_direction(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ return GPIO_LINE_DIRECTION_IN;
+}
+
+static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset)
+{
+ struct gpio_cascade *cas;
+ int ret;
+
+ cas = chip_to_cascade(gc);
+ ret = mux_control_select(cas->mux_control, offset);
+ if (ret)
+ return ret;
+
+ ret = gpiod_get_value(cas->upstream_line);
+ mux_control_deselect(cas->mux_control);
+ return ret;
+}
+
+static int gpio_cascade_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct gpio_cascade *cas;
+ struct mux_control *mc;
+ struct gpio_desc *upstream;
+ struct gpio_chip *gc;
+ int err;
+
+ cas = devm_kzalloc(dev, sizeof(struct gpio_cascade), GFP_KERNEL);
+ if (cas == NULL)
+ return -ENOMEM;
+
+ mc = devm_mux_control_get(dev, NULL);
+ if (IS_ERR(mc)) {
+ err = (int) PTR_ERR(mc);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "unable to get mux-control: %d\n", err);
+ return err;
+ }
+
+ cas->mux_control = mc;
+ upstream = devm_gpiod_get(dev, "upstream", GPIOD_IN);
+ if (IS_ERR(upstream)) {
+ err = (int) PTR_ERR(upstream);
+ dev_err(dev, "unable to claim upstream GPIO line: %d\n", err);
+ return err;
+ }
+
+ cas->upstream_line = upstream;
+ cas->parent = dev;
+
+ gc = &cas->gpio_chip;
+ gc->get = gpio_cascade_get_value;
+ gc->get_direction = gpio_cascade_get_direction;
+
+ gc->base = -1;
+ gc->ngpio = mux_control_states(mc);
+ gc->label = dev_name(cas->parent);
+ gc->parent = cas->parent;
+ gc->owner = THIS_MODULE;
+ gc->of_node = np;
+
+ err = gpiochip_add(&cas->gpio_chip);
+ if (err) {
+ dev_err(dev, "unable to add gpio chip, err=%d\n", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, cas);
+ dev_info(dev, "registered %u cascaded GPIO lines\n", gc->ngpio);
+ return 0;
+}
+
+static const struct of_device_id gpio_cascade_id[] = {
+ {
+ .compatible = "gpio-cascade",
+ .data = NULL,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, gpio_cascade_id);
+
+static struct platform_driver gpio_cascade_driver = {
+ .driver = {
+ .name = "gpio-cascade",
+ .of_match_table = gpio_cascade_id,
+ },
+ .probe = gpio_cascade_probe,
+};
+module_platform_driver(gpio_cascade_driver);
+
+MODULE_AUTHOR("Mauri Sandberg <maukka@ext.kapsi.fi>");
+MODULE_DESCRIPTION("Generic GPIO cascade");
+MODULE_LICENSE("GPL");
Adds support for a building cascades of GPIO lines. That is, it allows setups when there is one upstream line and multiple cascaded lines, out of which one can be chosen at a time. The status of the upstream line can be conveyd to the selected cascaded line or, vice versa, the status of the cascaded line can be conveyed to the upstream line. A gpio-mux is being used to select, which cascaded GPIO line is being used at any given time. At the moment only input direction is supported. In future it should be possible to add support for output direction, too. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> --- v4 -> v5: - renamed gpio-mux-input -> gpio-cascade. refactored code accordingly here and there and changed to use new bindings and compatible string - ambigious and vague 'pin' was rename to 'upstream_line' - dropped Tested-by and Reviewed-by due to changes in bindings - dropped Reported-by suggested by an automatic bot as it was not really appropriate to begin with - functionally it's the same as v4 v3 -> v4: - Changed author email - Included Tested-by and Reviewed-by from Drew v2 -> v3: - use managed device resources - update Kconfig description v1 -> v2: - removed .owner from platform_driver as per test bot's instruction - added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE - added gpio_mux_input_get_direction as it's recommended for all chips - removed because this is input only chip: gpio_mux_input_set_value - removed because they are not needed for input/output only chips: gpio_mux_input_direction_input gpio_mux_input_direction_output - fixed typo in an error message - added info message about successful registration - removed can_sleep flag as this does not sleep while getting GPIO value like I2C or SPI do - Updated description in Kconfig --- drivers/gpio/Kconfig | 14 ++++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-cascade.c | 139 ++++++++++++++++++++++++++++++++++++ 3 files changed, 154 insertions(+) create mode 100644 drivers/gpio/gpio-cascade.c