diff mbox series

[PATCHv5,4/5] ARM: dts: imx53-ppd: Fix ACHC entry

Message ID 20210621175359.126729-5-sebastian.reichel@collabora.com
State Superseded
Headers show
Series [PATCHv5,1/5] spi: add ancillary device support | expand

Commit Message

Sebastian Reichel June 21, 2021, 5:53 p.m. UTC
PPD has only one ACHC device, which effectively is a Kinetis
microcontroller. It has one SPI interface used for normal
communication. Additionally it's possible to flash the device
firmware using NXP's EzPort protocol by correctly driving a
second chip select pin and the device reset pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx53-ppd.dts | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index be040b6a02fa..1f3ee60fb102 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@  cko2_11M: sgtl-clock-cko2 {
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -314,16 +320,13 @@  &gpio4 11 GPIO_ACTIVE_LOW
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {