@@ -48,8 +48,8 @@
* Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander
* Vorona for 2i2 protocol traces).
*
- * Support for phantom power, direct monitoring, and speaker switching
- * added in May-June 2021.
+ * Support for phantom power, direct monitoring, speaker switching,
+ * and talkback added in May-June 2021.
*
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
@@ -57,7 +57,8 @@
* - gain/volume/mute controls
* - level meters
* - line/inst level, pad, and air controls
- * - phantom power, direct monitor, and speaker switching controls
+ * - phantom power, direct monitor, speaker switching, and talkback
+ * controls
* - disable/enable MSD mode
*
* <ditaa>
@@ -318,6 +319,9 @@ struct scarlett2_device_info {
/* support for main/alt speaker switching */
u8 has_speaker_switching;
+ /* support for talkback microphone */
+ u8 has_talkback;
+
/* the number of analogue inputs with a software switchable
* level control that can be set to line or instrument
*/
@@ -396,6 +400,8 @@ struct scarlett2_data {
u8 phantom_persistence;
u8 direct_monitor_switch;
u8 speaker_switching_switch;
+ u8 talkback_switch;
+ u8 talkback_map[SCARLETT2_OUTPUT_MIX_MAX];
u8 msd_switch;
struct snd_kcontrol *sync_ctl;
struct snd_kcontrol *master_vol_ctl;
@@ -410,6 +416,7 @@ struct scarlett2_data {
struct snd_kcontrol *mux_ctls[SCARLETT2_MUX_MAX];
struct snd_kcontrol *direct_monitor_ctl;
struct snd_kcontrol *speaker_switching_ctl;
+ struct snd_kcontrol *talkback_ctl;
u8 mux[SCARLETT2_MUX_MAX];
u8 mix[SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX];
};
@@ -764,6 +771,7 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
.has_mixer = 1,
.line_out_hw_vol = 1,
.has_speaker_switching = 1,
+ .has_talkback = 1,
.level_input_count = 2,
.pad_input_count = 8,
.air_input_count = 8,
@@ -923,7 +931,8 @@ enum {
SCARLETT2_CONFIG_DIRECT_MONITOR = 10,
SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH = 11,
SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE = 12,
- SCARLETT2_CONFIG_COUNT = 13
+ SCARLETT2_CONFIG_TALKBACK_MAP = 13,
+ SCARLETT2_CONFIG_COUNT = 14
};
/* Location, size, and activation command number for the configuration
@@ -998,6 +1007,9 @@ static const struct scarlett2_config
[SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE] = {
.offset = 0xa0, .size = 1, .activate = 10 },
+
+ [SCARLETT2_CONFIG_TALKBACK_MAP] = {
+ .offset = 0xb0, .size = 16, .activate = 10 },
} };
/* proprietary request/response format */
@@ -2361,10 +2373,14 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer)
const struct scarlett2_device_info *info = private->info;
int err;
- /* monitor_other_enable[0] enables speaker switching */
+ /* monitor_other_enable[0] enables speaker switching
+ * monitor_other_enable[1] enables talkback
+ */
u8 monitor_other_enable[2];
- /* monitor_other_switch[0] activates the alternate speakers */
+ /* monitor_other_switch[0] activates the alternate speakers
+ * monitor_other_switch[1] activates talkback
+ */
u8 monitor_other_switch[2];
private->monitor_other_updated = 0;
@@ -2374,6 +2390,9 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer)
mixer, SCARLETT2_CONFIG_DIRECT_MONITOR,
1, &private->direct_monitor_switch);
+ /* if it doesn't do speaker switching then it also doesn't do
+ * talkback
+ */
if (!info->has_speaker_switching)
return 0;
@@ -2394,6 +2413,26 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer)
else
private->speaker_switching_switch = monitor_other_switch[0] + 1;
+ if (info->has_talkback) {
+ const int (*port_count)[SCARLETT2_PORT_DIRNS] =
+ info->port_count;
+ int num_mixes =
+ port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_IN];
+ u16 bitmap;
+ int i;
+
+ if (!monitor_other_enable[1])
+ private->talkback_switch = 0;
+ else
+ private->talkback_switch = monitor_other_switch[1] + 1;
+
+ err = scarlett2_usb_get_config(mixer,
+ SCARLETT2_CONFIG_TALKBACK_MAP,
+ 1, &bitmap);
+ for (i = 0; i < num_mixes; i++, bitmap >>= 1)
+ private->talkback_map[i] = bitmap & 1;
+ }
+
return 0;
}
@@ -2631,6 +2670,171 @@ static int scarlett2_add_speaker_switch_ctl(
&private->speaker_switching_ctl);
}
+/*** Talkback and Talkback Map Controls ***/
+
+static int scarlett2_talkback_enum_ctl_info(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo)
+{
+ static const char *const values[3] = {
+ "Disabled", "Off", "On"
+ };
+
+ return snd_ctl_enum_info(uinfo, 1, 3, values);
+}
+
+static int scarlett2_talkback_enum_ctl_get(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ mutex_lock(&private->data_mutex);
+ if (private->monitor_other_updated)
+ scarlett2_update_monitor_other(mixer);
+ ucontrol->value.enumerated.item[0] = private->talkback_switch;
+ mutex_unlock(&private->data_mutex);
+
+ return 0;
+}
+
+static int scarlett2_talkback_enum_ctl_put(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->talkback_switch;
+ val = min(ucontrol->value.enumerated.item[0], 2U);
+
+ if (oval == val)
+ goto unlock;
+
+ private->talkback_switch = val;
+
+ /* enable/disable talkback */
+ err = scarlett2_usb_set_config(
+ mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE,
+ 1, !!val);
+ if (err < 0)
+ goto unlock;
+
+ /* if talkback is enabled, select main or alt */
+ err = scarlett2_usb_set_config(
+ mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH,
+ 1, val == 2);
+ if (err < 0)
+ goto unlock;
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_talkback_enum_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett2_talkback_enum_ctl_info,
+ .get = scarlett2_talkback_enum_ctl_get,
+ .put = scarlett2_talkback_enum_ctl_put,
+};
+
+static int scarlett2_talkback_map_ctl_get(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+ int index = elem->control;
+
+ ucontrol->value.integer.value[0] = private->talkback_map[index];
+
+ return 0;
+}
+
+static int scarlett2_talkback_map_ctl_put(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+ const int (*port_count)[SCARLETT2_PORT_DIRNS] =
+ private->info->port_count;
+ int num_mixes = port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_IN];
+
+ int index = elem->control;
+ int oval, val, err = 0, i;
+ u16 bitmap = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->talkback_map[index];
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->talkback_map[index] = val;
+
+ for (i = 0; i < num_mixes; i++)
+ bitmap |= private->talkback_map[i] << i;
+
+ /* Send updated bitmap to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_TALKBACK_MAP,
+ 0, bitmap);
+ if (err < 0)
+ goto unlock;
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_talkback_map_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = snd_ctl_boolean_mono_info,
+ .get = scarlett2_talkback_map_ctl_get,
+ .put = scarlett2_talkback_map_ctl_put,
+};
+
+static int scarlett2_add_talkback_ctls(
+ struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+ const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count;
+ int num_mixes = port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_IN];
+ int err, i;
+ char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
+
+ if (!info->has_talkback)
+ return 0;
+
+ err = scarlett2_add_new_ctl(
+ mixer, &scarlett2_talkback_enum_ctl,
+ 0, 1, "Talkback Playback Enum",
+ &private->talkback_ctl);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < num_mixes; i++) {
+ snprintf(s, sizeof(s),
+ "Talkback Mix %c Playback Switch", i + 'A');
+ err = scarlett2_add_new_ctl(mixer, &scarlett2_talkback_map_ctl,
+ i, 1, s, NULL);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
/*** Dim/Mute Controls ***/
static int scarlett2_dim_mute_ctl_get(struct snd_kcontrol *kctl,
@@ -3526,7 +3730,9 @@ static void scarlett2_notify_input_other(
&private->phantom_ctls[i]->id);
}
-/* Notify on "monitor other" change (direct monitor, speaker switching) */
+/* Notify on "monitor other" change (direct monitor, speaker
+ * switching, talkback)
+ */
static void scarlett2_notify_monitor_other(
struct usb_mixer_interface *mixer)
{
@@ -3546,6 +3752,10 @@ static void scarlett2_notify_monitor_other(
snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->speaker_switching_ctl->id);
+ if (info->has_talkback)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->talkback_ctl->id);
+
/* if speaker switching was recently enabled or disabled,
* invalidate the dim/mute and mux enum controls
*/
@@ -3701,6 +3911,11 @@ static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
if (err < 0)
return err;
+ /* Create the talkback controls */
+ err = scarlett2_add_talkback_ctls(mixer);
+ if (err < 0)
+ return err;
+
/* Set up the interrupt polling */
err = scarlett2_init_notify(mixer);
if (err < 0)