@@ -48,8 +48,8 @@
* Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander
* Vorona for 2i2 protocol traces).
*
- * Support for phantom power and direct monitoring added in May-June
- * 2021.
+ * Support for phantom power, direct monitoring, and speaker switching
+ * added in May-June 2021.
*
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
@@ -57,7 +57,7 @@
* - gain/volume/mute controls
* - level meters
* - line/inst level, pad, and air controls
- * - phantom power and direct monitor controls
+ * - phantom power, direct monitor, and speaker switching controls
* - disable/enable MSD mode
*
* <ditaa>
@@ -315,6 +315,9 @@ struct scarlett2_device_info {
/* line out hw volume is sw controlled */
u8 line_out_hw_vol;
+ /* support for main/alt speaker switching */
+ u8 has_speaker_switching;
+
/* the number of analogue inputs with a software switchable
* level control that can be set to line or instrument
*/
@@ -379,6 +382,7 @@ struct scarlett2_data {
u8 input_other_updated;
u8 monitor_other_updated;
u8 mux_updated;
+ u8 speaker_switching_switched;
u8 sync;
u8 master_vol;
u8 vol[SCARLETT2_ANALOGUE_MAX];
@@ -391,6 +395,7 @@ struct scarlett2_data {
u8 phantom_switch[SCARLETT2_PHANTOM_SWITCH_MAX];
u8 phantom_persistence;
u8 direct_monitor_switch;
+ u8 speaker_switching_switch;
u8 msd_switch;
struct snd_kcontrol *sync_ctl;
struct snd_kcontrol *master_vol_ctl;
@@ -404,6 +409,7 @@ struct scarlett2_data {
struct snd_kcontrol *phantom_ctls[SCARLETT2_PHANTOM_SWITCH_MAX];
struct snd_kcontrol *mux_ctls[SCARLETT2_MUX_MAX];
struct snd_kcontrol *direct_monitor_ctl;
+ struct snd_kcontrol *speaker_switching_ctl;
u8 mux[SCARLETT2_MUX_MAX];
u8 mix[SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX];
};
@@ -687,6 +693,7 @@ static const struct scarlett2_device_info s18i8_gen3_info = {
.has_msd_mode = 1,
.has_mixer = 1,
.line_out_hw_vol = 1,
+ .has_speaker_switching = 1,
.level_input_count = 2,
.pad_input_count = 2,
.air_input_count = 4,
@@ -756,6 +763,7 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
.has_msd_mode = 1,
.has_mixer = 1,
.line_out_hw_vol = 1,
+ .has_speaker_switching = 1,
.level_input_count = 2,
.pad_input_count = 8,
.air_input_count = 8,
@@ -913,7 +921,9 @@ enum {
SCARLETT2_CONFIG_PHANTOM_SWITCH = 8,
SCARLETT2_CONFIG_PHANTOM_PERSISTENCE = 9,
SCARLETT2_CONFIG_DIRECT_MONITOR = 10,
- SCARLETT2_CONFIG_COUNT = 11
+ SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH = 11,
+ SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE = 12,
+ SCARLETT2_CONFIG_COUNT = 13
};
/* Location, size, and activation command number for the configuration
@@ -982,6 +992,12 @@ static const struct scarlett2_config
[SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = {
.offset = 0x9e, .size = 8, .activate = 6 },
+
+ [SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH] = {
+ .offset = 0x9f, .size = 1, .activate = 10 },
+
+ [SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE] = {
+ .offset = 0xa0, .size = 1, .activate = 10 },
} };
/* proprietary request/response format */
@@ -1862,6 +1878,18 @@ static const struct snd_kcontrol_new scarlett2_mute_ctl = {
/*** HW/SW Volume Switch Controls ***/
+static void scarlett2_sw_hw_ctl_ro(struct scarlett2_data *private, int index)
+{
+ private->sw_hw_ctls[index]->vd[0].access &=
+ ~SNDRV_CTL_ELEM_ACCESS_WRITE;
+}
+
+static void scarlett2_sw_hw_ctl_rw(struct scarlett2_data *private, int index)
+{
+ private->sw_hw_ctls[index]->vd[0].access |=
+ SNDRV_CTL_ELEM_ACCESS_WRITE;
+}
+
static int scarlett2_sw_hw_enum_ctl_info(struct snd_kcontrol *kctl,
struct snd_ctl_elem_info *uinfo)
{
@@ -2325,6 +2353,13 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer)
{
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
+ int err;
+
+ /* monitor_other_enable[0] enables speaker switching */
+ u8 monitor_other_enable[2];
+
+ /* monitor_other_switch[0] activates the alternate speakers */
+ u8 monitor_other_switch[2];
private->monitor_other_updated = 0;
@@ -2333,6 +2368,26 @@ static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer)
mixer, SCARLETT2_CONFIG_DIRECT_MONITOR,
1, &private->direct_monitor_switch);
+ if (!info->has_speaker_switching)
+ return 0;
+
+ err = scarlett2_usb_get_config(
+ mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE,
+ 2, monitor_other_enable);
+ if (err < 0)
+ return err;
+
+ err = scarlett2_usb_get_config(
+ mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH,
+ 2, monitor_other_switch);
+ if (err < 0)
+ return err;
+
+ if (!monitor_other_enable[0])
+ private->speaker_switching_switch = 0;
+ else
+ private->speaker_switching_switch = monitor_other_switch[0] + 1;
+
return 0;
}
@@ -2425,6 +2480,151 @@ static int scarlett2_add_direct_monitor_ctl(struct usb_mixer_interface *mixer)
&private->direct_monitor_ctl);
}
+/*** Speaker Switching Control ***/
+
+static int scarlett2_speaker_switch_enum_ctl_info(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo)
+{
+ static const char *const values[3] = {
+ "Off", "Main", "Alt"
+ };
+
+ return snd_ctl_enum_info(uinfo, 1, 3, values);
+}
+
+static int scarlett2_speaker_switch_enum_ctl_get(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ mutex_lock(&private->data_mutex);
+ if (private->monitor_other_updated)
+ scarlett2_update_monitor_other(mixer);
+ ucontrol->value.enumerated.item[0] = private->speaker_switching_switch;
+ mutex_unlock(&private->data_mutex);
+
+ return 0;
+}
+
+/* when speaker switching gets enabled, switch the main/alt speakers
+ * to HW volume and disable those controls
+ */
+static void scarlett2_speaker_switch_enable(struct usb_mixer_interface *mixer)
+{
+ struct snd_card *card = mixer->chip->card;
+ struct scarlett2_data *private = mixer->private_data;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ int index = line_out_remap(private, i);
+
+ /* switch the main/alt speakers to HW volume */
+ if (!private->vol_sw_hw_switch[index])
+ scarlett2_sw_hw_change(private->mixer, i, 1);
+
+ /* disable the line out SW/HW switch */
+ scarlett2_sw_hw_ctl_ro(private, i);
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO,
+ &private->sw_hw_ctls[i]->id);
+ }
+
+ /* when the next monitor-other notify comes in, update the mux
+ * configuration
+ */
+ private->speaker_switching_switched = 1;
+}
+
+/* when speaker switching gets disabled, reenable the hw/sw controls
+ * and invalidate the routing
+ */
+static void scarlett2_speaker_switch_disable(struct usb_mixer_interface *mixer)
+{
+ struct snd_card *card = mixer->chip->card;
+ struct scarlett2_data *private = mixer->private_data;
+ int i;
+
+ /* enable the line out SW/HW switch */
+ for (i = 0; i < 4; i++) {
+ scarlett2_sw_hw_ctl_rw(private, i);
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO,
+ &private->sw_hw_ctls[i]->id);
+ }
+
+ /* when the next monitor-other notify comes in, update the mux
+ * configuration
+ */
+ private->speaker_switching_switched = 1;
+}
+
+static int scarlett2_speaker_switch_enum_ctl_put(
+ struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->speaker_switching_switch;
+ val = min(ucontrol->value.enumerated.item[0], 2U);
+
+ if (oval == val)
+ goto unlock;
+
+ private->speaker_switching_switch = val;
+
+ /* enable/disable speaker switching */
+ err = scarlett2_usb_set_config(
+ mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE,
+ 0, !!val);
+ if (err < 0)
+ goto unlock;
+
+ /* if speaker switching is enabled, select main or alt */
+ err = scarlett2_usb_set_config(
+ mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH,
+ 0, val == 2);
+ if (err < 0)
+ goto unlock;
+
+ /* update controls if speaker switching gets enabled or disabled */
+ if (!oval && val)
+ scarlett2_speaker_switch_enable(mixer);
+ else if (oval && !val)
+ scarlett2_speaker_switch_disable(mixer);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_speaker_switch_enum_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett2_speaker_switch_enum_ctl_info,
+ .get = scarlett2_speaker_switch_enum_ctl_get,
+ .put = scarlett2_speaker_switch_enum_ctl_put,
+};
+
+static int scarlett2_add_speaker_switch_ctl(
+ struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+
+ if (!info->has_speaker_switching)
+ return 0;
+
+ return scarlett2_add_new_ctl(
+ mixer, &scarlett2_speaker_switch_enum_ctl,
+ 0, 1, "Speaker Switching Playback Enum",
+ &private->speaker_switching_ctl);
+}
+
/*** Dim/Mute Controls ***/
static int scarlett2_dim_mute_ctl_get(struct snd_kcontrol *kctl,
@@ -2567,6 +2767,12 @@ static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer)
&private->sw_hw_ctls[i]);
if (err < 0)
return err;
+
+ /* Make the switch read-only if the line is
+ * involved in speaker switching
+ */
+ if (private->speaker_switching_switch && i < 4)
+ scarlett2_sw_hw_ctl_ro(private, i);
}
}
@@ -3314,18 +3520,41 @@ static void scarlett2_notify_input_other(
&private->phantom_ctls[i]->id);
}
-/* Notify on "monitor other" change (direct monitor) */
+/* Notify on "monitor other" change (direct monitor, speaker switching) */
static void scarlett2_notify_monitor_other(
struct usb_mixer_interface *mixer)
{
- struct scarlett2_data *private = mixer->private_data;
struct snd_card *card = mixer->chip->card;
+ struct scarlett2_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
private->monitor_other_updated = 1;
- if (private->info->direct_monitor)
+ if (info->direct_monitor) {
snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->direct_monitor_ctl->id);
+ return;
+ }
+
+ if (info->has_speaker_switching)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->speaker_switching_ctl->id);
+
+ /* if speaker switching was recently enabled or disabled,
+ * invalidate the dim/mute and mux enum controls
+ */
+ if (private->speaker_switching_switched) {
+ int i;
+
+ scarlett2_notify_dim_mute(mixer);
+
+ private->speaker_switching_switched = 0;
+ private->mux_updated = 1;
+
+ for (i = 0; i < private->num_mux_dsts; i++)
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->mux_ctls[i]->id);
+ }
}
/* Interrupt callback */
@@ -3461,6 +3690,11 @@ static int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
if (err < 0)
return err;
+ /* Create the speaker switching control */
+ err = scarlett2_add_speaker_switch_ctl(mixer);
+ if (err < 0)
+ return err;
+
/* Set up the interrupt polling */
err = scarlett2_init_notify(mixer);
if (err < 0)
The 18i8 and 18i20 Gen 3 support "speaker switching". Add a Speaker Switch control which can be set to Off/Main/Alt. When speaker switching is enabled or disabled, the interface may change the state of the Analog Outputs 3 and 4 routing and the global mute button, so use a flag private->speaker_switching_switched to note that those should be checked when the next "monitor other" notification is received. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> --- sound/usb/mixer_scarlett_gen2.c | 248 +++++++++++++++++++++++++++++++- 1 file changed, 241 insertions(+), 7 deletions(-)