diff mbox series

[net,2/4] i40e: Fix autoneg disabling for non-10GBaseT links

Message ID 20210624181434.751511-3-anthony.l.nguyen@intel.com
State New
Headers show
Series None | expand

Commit Message

Tony Nguyen June 24, 2021, 6:14 p.m. UTC 
From: Mateusz Palczewski <mateusz.palczewski@intel.com>

Disabling autonegotiation was allowed only for 10GBaseT PHY.
The condition was changed to check if link media type is BaseT.

Fixes: 3ce12ee9d8f9 ("i40e: Fix order of checks when enabling/disabling autoneg in ethtool")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Karen Sornek <karen.sornek@intel.com>
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index ccd5b9486ea9..3e822bad4851 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1262,8 +1262,7 @@  static int i40e_set_link_ksettings(struct net_device *netdev,
 			if (ethtool_link_ksettings_test_link_mode(&safe_ks,
 								  supported,
 								  Autoneg) &&
-			    hw->phy.link_info.phy_type !=
-			    I40E_PHY_TYPE_10GBASE_T) {
+			    hw->phy.media_type != I40E_MEDIA_TYPE_BASET) {
 				netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
 				err = -EINVAL;
 				goto done;