diff mbox series

[2/2] arm64: dts: qcom: Fix usb entries for SA8155p adp board

Message ID 20210625220311.527549-3-bhupesh.sharma@linaro.org
State Accepted
Commit 12dd4ebda47abd5e3907da386b6fe1d8181ad179
Headers show
Series arm64: dts: qcom: Fix usb entries for SA8155p-adp board | expand

Commit Message

Bhupesh Sharma June 25, 2021, 10:03 p.m. UTC
SA8155p adp board has two USB A-type receptacles called
USB-portB and USB-portC respectively.

While USB-portB is a USB High-Speed connector/interface, the
USB-portC one is a USB 3.1 Super-Speed connector/interface.

Also the USB-portB is used as the USB emergency
download port (for image download purposes).

Enable both the ports on the board in USB Host mode (since all
the USB interfaces are brought out to USB Type A
connectors).

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 60 ++++++++++++++++++++----
 1 file changed, 51 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 0da7a3b8d1bf..5ae2ddc65f7e 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -307,10 +307,6 @@  &qupv3_id_1 {
 	status = "okay";
 };
 
-&tlmm {
-	gpio-reserved-ranges = <0 4>;
-};
-
 &uart2 {
 	status = "okay";
 };
@@ -337,6 +333,16 @@  &ufs_mem_phy {
 	vdda-pll-max-microamp = <18300>;
 };
 
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2phy_ac_en1_default>;
+};
 
 &usb_1_hsphy {
 	status = "okay";
@@ -346,15 +352,51 @@  &usb_1_hsphy {
 };
 
 &usb_1_qmpphy {
+	status = "disabled";
+};
+
+&usb_2 {
 	status = "okay";
-	vdda-phy-supply = <&vreg_l8c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
 };
 
-&usb_1 {
+&usb_2_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2phy_ac_en2_default>;
+};
+
+&usb_2_hsphy {
 	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
 };
 
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l8c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	usb2phy_ac_en1_default: usb2phy_ac_en1_default {
+		mux {
+			pins = "gpio113";
+			function = "usb2phy_ac";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	usb2phy_ac_en2_default: usb2phy_ac_en2_default {
+		mux {
+			pins = "gpio123";
+			function = "usb2phy_ac";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };