diff mbox series

[v1,1/3] dt-bindings: mfd: convert tps65086.txt to YAML

Message ID 20210625224744.1020108-2-kernel@esmil.dk
State Superseded
Headers show
Series BeagleV Starlight reset support | expand

Commit Message

Emil Renner Berthing June 25, 2021, 10:47 p.m. UTC
This converts the tps65086.txt binding description to YAML schema so
dts files can be verified automatically.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
@Andrew: The dt-bindings meta schema requires a maintainer entry. I hope
it's ok that I've added you, otherwise I don't know who should be
listed.

 .../devicetree/bindings/mfd/ti,tps65086.yaml  | 127 ++++++++++++++++++
 .../devicetree/bindings/mfd/tps65086.txt      |  54 --------
 2 files changed, 127 insertions(+), 54 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Comments

Rob Herring (Arm) July 14, 2021, 8:44 p.m. UTC | #1
On Sat, Jun 26, 2021 at 12:47:42AM +0200, Emil Renner Berthing wrote:
> This converts the tps65086.txt binding description to YAML schema so

> dts files can be verified automatically.

> 

> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>

> ---

> @Andrew: The dt-bindings meta schema requires a maintainer entry. I hope

> it's ok that I've added you, otherwise I don't know who should be

> listed.


Anyone that knows the h/w and/or cares if the binding is changed or 
deleted. If you can't find anyone, then good, one less binding. :)

> 

>  .../devicetree/bindings/mfd/ti,tps65086.yaml  | 127 ++++++++++++++++++

>  .../devicetree/bindings/mfd/tps65086.txt      |  54 --------

>  2 files changed, 127 insertions(+), 54 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml

>  delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

> 

> diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml

> new file mode 100644

> index 000000000000..ba638bd10a58

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml

> @@ -0,0 +1,127 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: TPS65086 Power Management Integrated Circuit (PMIC)

> +

> +maintainers:

> +  - Andrew F. Davis <afd@ti.com>


Not a valid email any more. 

> +

> +properties:

> +  compatible:

> +    const: ti,tps65086

> +

> +  reg:

> +    const: 0x5e

> +    description: I2C slave address

> +

> +  interrupts:

> +    maxItems: 1

> +

> +  interrupt-controller: true

> +

> +  '#interrupt-cells':

> +    const: 2

> +    description: |

> +      The first cell is the IRQ number. The second cell is the flags,

> +      encoded as trigger masks from ../interrupt-controller/interrupts.txt.

> +

> +  gpio-controller: true

> +

> +  '#gpio-cells':

> +    const: 2

> +    description: |

> +      The first cell is the pin number and the second cell is used to specify

> +      flags.  See ../gpio/gpio.txt for more information.

> +

> +  regulators:

> +    type: object

> +    description: |

> +      List of child nodes that specify the regulator initialization data.

> +      Child nodes must be named after their hardware counterparts:

> +      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.

> +      Each child node is defined using the standard binding for regulators and

> +      the optional regulator properties defined below.

> +

> +    patternProperties:

> +      "^buck[1-6]$":

> +        type: object

> +        $ref: ../regulator/regulator.yaml

> +

> +        properties:

> +          regulator-name: true

> +          regulator-boot-on: true

> +          regulator-always-on: true

> +          regulator-min-microvolt: true

> +          regulator-max-microvolt: true

> +          ti,regulator-step-size-25mv:

> +            type: boolean

> +            description: |

> +              Set this if the regulator is factory set with a 25mv step voltage

> +              mapping.

> +          ti,regulator-decay:

> +            type: boolean

> +            description: |

> +              Set this if the output needs to decay, default is for the output

> +              to slew down.

> +

> +        additionalProperties: false

> +

> +      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":

> +        type: object

> +        $ref: ../regulator/regulator.yaml

> +

> +        properties:

> +          regulator-name: true

> +          regulator-boot-on: true

> +          regulator-always-on: true

> +          regulator-min-microvolt: true

> +          regulator-max-microvolt: true

> +

> +        additionalProperties: false

> +

> +additionalProperties: false

> +

> +required:

> +  - compatible

> +  - reg

> +  - interrupts

> +  - interrupt-controller

> +  - '#interrupt-cells'

> +  - gpio-controller

> +  - '#gpio-cells'

> +  - regulators

> +

> +examples:

> +  - |

> +    #include <dt-bindings/interrupt-controller/irq.h>

> +    i2c0 {

> +        #address-cells = <1>;

> +        #size-cells = <0>;

> +

> +        pmic: tps65086@5e {


pmic@5e

> +            compatible = "ti,tps65086";

> +            reg = <0x5e>;

> +            interrupt-parent = <&gpio1>;

> +            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;

> +            interrupt-controller;

> +            #interrupt-cells = <2>;

> +            gpio-controller;

> +            #gpio-cells = <2>;

> +

> +            regulators {

> +                buck1 {

> +                    regulator-name = "vcc1";

> +                    regulator-min-microvolt = <1600000>;

> +                    regulator-max-microvolt = <1600000>;

> +                    regulator-boot-on;

> +                    ti,regulator-decay;

> +                    ti,regulator-step-size-25mv;

> +                };

> +            };

> +        };

> +    };

> +

> +...

> diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt

> deleted file mode 100644

> index 67eac0ed32df..000000000000

> --- a/Documentation/devicetree/bindings/mfd/tps65086.txt

> +++ /dev/null

> @@ -1,54 +0,0 @@

> -* TPS65086 Power Management Integrated Circuit (PMIC) bindings

> -

> -Required properties:

> - - compatible		: Should be "ti,tps65086".

> - - reg			: I2C slave address.

> - - interrupts		: The interrupt line the device is connected to.

> - - interrupt-controller	: Marks the device node as an interrupt controller.

> - - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.

> -			    The first cell is the IRQ number.

> -			    The second cell is the flags, encoded as trigger

> -			    masks from ../interrupt-controller/interrupts.txt.

> - - gpio-controller      : Marks the device node as a GPIO Controller.

> - - #gpio-cells          : Should be two.  The first cell is the pin number and

> -                            the second cell is used to specify flags.

> -                            See ../gpio/gpio.txt for more information.

> - - regulators:          : List of child nodes that specify the regulator

> -                            initialization data. Child nodes must be named

> -                            after their hardware counterparts: buck[1-6],

> -                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child

> -                            node is defined using the standard binding for

> -                            regulators and the optional regulator properties

> -                            defined below.

> -

> -Optional regulator properties:

> - - ti,regulator-step-size-25mv	: This is applicable for buck[1-6], set this

> -				    if the regulator is factory set with a 25mv

> -				    step voltage mapping.

> - - ti,regulator-decay		: This is applicable for buck[1-6], set this if

> -				    the output needs to decay, default is for

> -				    the output to slew down.

> -

> -Example:

> -

> -	pmic: tps65086@5e {

> -		compatible = "ti,tps65086";

> -		reg = <0x5e>;

> -		interrupt-parent = <&gpio1>;

> -		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;

> -		interrupt-controller;

> -		#interrupt-cells = <2>;

> -		gpio-controller;

> -		#gpio-cells = <2>;

> -

> -		regulators {

> -			buck1 {

> -				regulator-name = "vcc1";

> -				regulator-min-microvolt = <1600000>;

> -				regulator-max-microvolt = <1600000>;

> -				regulator-boot-on;

> -				ti,regulator-decay;

> -				ti,regulator-step-size-25mv;

> -			};

> -		};

> -	};

> -- 

> 2.32.0

> 

>
Emil Renner Berthing July 14, 2021, 8:59 p.m. UTC | #2
On Wed, 14 Jul 2021 at 22:44, Rob Herring <robh@kernel.org> wrote:
> On Sat, Jun 26, 2021 at 12:47:42AM +0200, Emil Renner Berthing wrote:
> > This converts the tps65086.txt binding description to YAML schema so
> > dts files can be verified automatically.
> >
> > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> > ---
> > @Andrew: The dt-bindings meta schema requires a maintainer entry. I hope
> > it's ok that I've added you, otherwise I don't know who should be
> > listed.
>
> Anyone that knows the h/w and/or cares if the binding is changed or
> deleted. If you can't find anyone, then good, one less binding. :)

Hmm.. unless someone else responds I guess I'll just put myself then
since I at least care that it isn't deleted.

> >
> >  .../devicetree/bindings/mfd/ti,tps65086.yaml  | 127 ++++++++++++++++++
> >  .../devicetree/bindings/mfd/tps65086.txt      |  54 --------
> >  2 files changed, 127 insertions(+), 54 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
> > new file mode 100644
> > index 000000000000..ba638bd10a58
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
> > @@ -0,0 +1,127 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: TPS65086 Power Management Integrated Circuit (PMIC)
> > +
> > +maintainers:
> > +  - Andrew F. Davis <afd@ti.com>
>
> Not a valid email any more.
>
> > +
> > +properties:
> > +  compatible:
> > +    const: ti,tps65086
> > +
> > +  reg:
> > +    const: 0x5e
> > +    description: I2C slave address
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-controller: true
> > +
> > +  '#interrupt-cells':
> > +    const: 2
> > +    description: |
> > +      The first cell is the IRQ number. The second cell is the flags,
> > +      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
> > +
> > +  gpio-controller: true
> > +
> > +  '#gpio-cells':
> > +    const: 2
> > +    description: |
> > +      The first cell is the pin number and the second cell is used to specify
> > +      flags.  See ../gpio/gpio.txt for more information.
> > +
> > +  regulators:
> > +    type: object
> > +    description: |
> > +      List of child nodes that specify the regulator initialization data.
> > +      Child nodes must be named after their hardware counterparts:
> > +      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
> > +      Each child node is defined using the standard binding for regulators and
> > +      the optional regulator properties defined below.
> > +
> > +    patternProperties:
> > +      "^buck[1-6]$":
> > +        type: object
> > +        $ref: ../regulator/regulator.yaml
> > +
> > +        properties:
> > +          regulator-name: true
> > +          regulator-boot-on: true
> > +          regulator-always-on: true
> > +          regulator-min-microvolt: true
> > +          regulator-max-microvolt: true
> > +          ti,regulator-step-size-25mv:
> > +            type: boolean
> > +            description: |
> > +              Set this if the regulator is factory set with a 25mv step voltage
> > +              mapping.
> > +          ti,regulator-decay:
> > +            type: boolean
> > +            description: |
> > +              Set this if the output needs to decay, default is for the output
> > +              to slew down.
> > +
> > +        additionalProperties: false
> > +
> > +      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
> > +        type: object
> > +        $ref: ../regulator/regulator.yaml
> > +
> > +        properties:
> > +          regulator-name: true
> > +          regulator-boot-on: true
> > +          regulator-always-on: true
> > +          regulator-min-microvolt: true
> > +          regulator-max-microvolt: true
> > +
> > +        additionalProperties: false
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-controller
> > +  - '#interrupt-cells'
> > +  - gpio-controller
> > +  - '#gpio-cells'
> > +  - regulators
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    i2c0 {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        pmic: tps65086@5e {
>
> pmic@5e

Will fix, thanks!

> > +            compatible = "ti,tps65086";
> > +            reg = <0x5e>;
> > +            interrupt-parent = <&gpio1>;
> > +            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> > +            interrupt-controller;
> > +            #interrupt-cells = <2>;
> > +            gpio-controller;
> > +            #gpio-cells = <2>;
> > +
> > +            regulators {
> > +                buck1 {
> > +                    regulator-name = "vcc1";
> > +                    regulator-min-microvolt = <1600000>;
> > +                    regulator-max-microvolt = <1600000>;
> > +                    regulator-boot-on;
> > +                    ti,regulator-decay;
> > +                    ti,regulator-step-size-25mv;
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> > deleted file mode 100644
> > index 67eac0ed32df..000000000000
> > --- a/Documentation/devicetree/bindings/mfd/tps65086.txt
> > +++ /dev/null
> > @@ -1,54 +0,0 @@
> > -* TPS65086 Power Management Integrated Circuit (PMIC) bindings
> > -
> > -Required properties:
> > - - compatible                : Should be "ti,tps65086".
> > - - reg                       : I2C slave address.
> > - - interrupts                : The interrupt line the device is connected to.
> > - - interrupt-controller      : Marks the device node as an interrupt controller.
> > - - #interrupt-cells  : The number of cells to describe an IRQ, should be 2.
> > -                         The first cell is the IRQ number.
> > -                         The second cell is the flags, encoded as trigger
> > -                         masks from ../interrupt-controller/interrupts.txt.
> > - - gpio-controller      : Marks the device node as a GPIO Controller.
> > - - #gpio-cells          : Should be two.  The first cell is the pin number and
> > -                            the second cell is used to specify flags.
> > -                            See ../gpio/gpio.txt for more information.
> > - - regulators:          : List of child nodes that specify the regulator
> > -                            initialization data. Child nodes must be named
> > -                            after their hardware counterparts: buck[1-6],
> > -                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
> > -                            node is defined using the standard binding for
> > -                            regulators and the optional regulator properties
> > -                            defined below.
> > -
> > -Optional regulator properties:
> > - - ti,regulator-step-size-25mv       : This is applicable for buck[1-6], set this
> > -                                 if the regulator is factory set with a 25mv
> > -                                 step voltage mapping.
> > - - ti,regulator-decay                : This is applicable for buck[1-6], set this if
> > -                                 the output needs to decay, default is for
> > -                                 the output to slew down.
> > -
> > -Example:
> > -
> > -     pmic: tps65086@5e {
> > -             compatible = "ti,tps65086";
> > -             reg = <0x5e>;
> > -             interrupt-parent = <&gpio1>;
> > -             interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> > -             interrupt-controller;
> > -             #interrupt-cells = <2>;
> > -             gpio-controller;
> > -             #gpio-cells = <2>;
> > -
> > -             regulators {
> > -                     buck1 {
> > -                             regulator-name = "vcc1";
> > -                             regulator-min-microvolt = <1600000>;
> > -                             regulator-max-microvolt = <1600000>;
> > -                             regulator-boot-on;
> > -                             ti,regulator-decay;
> > -                             ti,regulator-step-size-25mv;
> > -                     };
> > -             };
> > -     };
> > --
> > 2.32.0
> >
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
new file mode 100644
index 000000000000..ba638bd10a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -0,0 +1,127 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65086 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Andrew F. Davis <afd@ti.com>
+
+properties:
+  compatible:
+    const: ti,tps65086
+
+  reg:
+    const: 0x5e
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell is the IRQ number. The second cell is the flags,
+      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags.  See ../gpio/gpio.txt for more information.
+
+  regulators:
+    type: object
+    description: |
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts:
+      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          ti,regulator-step-size-25mv:
+            type: boolean
+            description: |
+              Set this if the regulator is factory set with a 25mv step voltage
+              mapping.
+          ti,regulator-decay:
+            type: boolean
+            description: |
+              Set this if the output needs to decay, default is for the output
+              to slew down.
+
+        additionalProperties: false
+
+      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+
+        additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: tps65086@5e {
+            compatible = "ti,tps65086";
+            reg = <0x5e>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "vcc1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1600000>;
+                    regulator-boot-on;
+                    ti,regulator-decay;
+                    ti,regulator-step-size-25mv;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
deleted file mode 100644
index 67eac0ed32df..000000000000
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ /dev/null
@@ -1,54 +0,0 @@ 
-* TPS65086 Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts: buck[1-6],
-                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
-                            node is defined using the standard binding for
-                            regulators and the optional regulator properties
-                            defined below.
-
-Optional regulator properties:
- - ti,regulator-step-size-25mv	: This is applicable for buck[1-6], set this
-				    if the regulator is factory set with a 25mv
-				    step voltage mapping.
- - ti,regulator-decay		: This is applicable for buck[1-6], set this if
-				    the output needs to decay, default is for
-				    the output to slew down.
-
-Example:
-
-	pmic: tps65086@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-			buck1 {
-				regulator-name = "vcc1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <1600000>;
-				regulator-boot-on;
-				ti,regulator-decay;
-				ti,regulator-step-size-25mv;
-			};
-		};
-	};