| Message ID | 20210627114616.717101-3-bhupesh.sharma@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: Fix usb entries for SA8155p-adp board | expand |
On Sun 27 Jun 06:46 CDT 2021, Bhupesh Sharma wrote: > Arrange the two usb controller, hs-phy and > ss-phy nodes closer in the dts for better readability. > The nodes are supposed to be sorted by address, then alphabetically by name and lastly when referred to using the &label by the label. As such the two nodes should live after &usb_2_qmpphy, so I took the liberty of adjusting your patch to resolve this. Thanks, Bjorn > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++-------------- > 1 file changed, 14 insertions(+), 14 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 9c931beeb614..163eb430eb1e 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -2205,6 +2205,20 @@ glink-edge { > }; > }; > > + dc_noc: interconnect@9160000 { > + compatible = "qcom,sm8150-dc-noc"; > + reg = <0 0x09160000 0 0x3200>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + gem_noc: interconnect@9680000 { > + compatible = "qcom,sm8150-gem-noc"; > + reg = <0 0x09680000 0 0x3e200>; > + #interconnect-cells = <1>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > usb_1_hsphy: phy@88e2000 { > compatible = "qcom,sm8150-usb-hs-phy", > "qcom,usb-snps-hs-7nm-phy"; > @@ -2266,20 +2280,6 @@ usb_1_ssphy: lanes@88e9200 { > }; > }; > > - dc_noc: interconnect@9160000 { > - compatible = "qcom,sm8150-dc-noc"; > - reg = <0 0x09160000 0 0x3200>; > - #interconnect-cells = <1>; > - qcom,bcm-voters = <&apps_bcm_voter>; > - }; > - > - gem_noc: interconnect@9680000 { > - compatible = "qcom,sm8150-gem-noc"; > - reg = <0 0x09680000 0 0x3e200>; > - #interconnect-cells = <1>; > - qcom,bcm-voters = <&apps_bcm_voter>; > - }; > - > usb_2_qmpphy: phy@88eb000 { > compatible = "qcom,sm8150-qmp-usb3-uni-phy"; > reg = <0 0x088eb000 0 0x200>; > -- > 2.31.1 >
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 9c931beeb614..163eb430eb1e 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2205,6 +2205,20 @@ glink-edge { }; }; + dc_noc: interconnect@9160000 { + compatible = "qcom,sm8150-dc-noc"; + reg = <0 0x09160000 0 0x3200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9680000 { + compatible = "qcom,sm8150-gem-noc"; + reg = <0 0x09680000 0 0x3e200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_1_hsphy: phy@88e2000 { compatible = "qcom,sm8150-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -2266,20 +2280,6 @@ usb_1_ssphy: lanes@88e9200 { }; }; - dc_noc: interconnect@9160000 { - compatible = "qcom,sm8150-dc-noc"; - reg = <0 0x09160000 0 0x3200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect@9680000 { - compatible = "qcom,sm8150-gem-noc"; - reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8150-qmp-usb3-uni-phy"; reg = <0 0x088eb000 0 0x200>;
Arrange the two usb controller, hs-phy and ss-phy nodes closer in the dts for better readability. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)