@@ -60,6 +60,54 @@
static struct ingenic_cgu *cgu;
+static void x1000_i2s_calc_m_n(const struct ingenic_cgu_pll_info *pll_info,
+ unsigned long rate, unsigned long parent_rate,
+ unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+ unsigned int delta, m, n;
+ u64 curr_delta, curr_m, curr_n;
+
+ if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) {
+ m = 1;
+ n = parent_rate / rate;
+ goto out;
+ }
+
+ delta = rate;
+
+ /*
+ * The length of M is 9 bits, its value must be between 1 and 511.
+ * The length of N is 13 bits, its value must be between 2 and 8191,
+ * and must not be less than 2 times of the value of M.
+ */
+ for (curr_m = 511; curr_m >= 1; curr_m--) {
+ curr_n = parent_rate * curr_m;
+ curr_delta = do_div(curr_n, rate);
+
+ if (curr_n < 2 * curr_m || curr_n > 8191)
+ continue;
+
+ if (curr_delta == 0)
+ break;
+
+ if (curr_delta < delta) {
+ m = curr_m;
+ n = curr_n;
+ delta = curr_delta;
+ }
+ }
+
+out:
+ *pm = m;
+ *pn = n;
+
+ /*
+ * The I2S PLL does not have OD bits, so set the *pod to 1 to ensure
+ * that the ingenic_pll_calc() in cgu.c can run properly.
+ */
+ *pod = 1;
+}
+
static unsigned long x1000_otg_phy_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -227,6 +275,27 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
},
},
+ [X1000_CLK_I2S] = {
+ "i2s", CGU_CLK_PLL,
+ .parents = { X1000_CLK_EXCLK, X1000_CLK_SCLKA, -1, X1000_CLK_MPLL },
+ .pll = {
+ .reg = CGU_REG_I2SCDR,
+ .rate_multiplier = 1,
+ .mux_shift = 30,
+ .mux_bits = 2,
+ .m_shift = 13,
+ .m_bits = 9,
+ .m_offset = 0,
+ .n_shift = 0,
+ .n_bits = 13,
+ .n_offset = 0,
+ .bypass_bit = -1,
+ .enable_bit = 29,
+ .stable_bit = -1,
+ .calc_m_n_od = x1000_i2s_calc_m_n,
+ },
+ },
+
/* Custom (SoC-specific) OTG PHY */
[X1000_CLK_OTGPHY] = {
@@ -359,6 +428,13 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.mux = { CGU_REG_SSICDR, 30, 1 },
},
+ [X1000_CLK_CIM] = {
+ "cim", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
+ .mux = { CGU_REG_CIMCDR, 31, 1 },
+ .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 },
+ },
+
[X1000_CLK_EXCLK_DIV512] = {
"exclk_div512", CGU_CLK_FIXDIV,
.parents = { X1000_CLK_EXCLK },
@@ -410,6 +486,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 9 },
},
+ [X1000_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 11 },
+ },
+
[X1000_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
@@ -428,6 +510,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 16 },
},
+ [X1000_CLK_DMIC] = {
+ "dmic", CGU_CLK_GATE,
+ .parents = { X1000_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 17 },
+ },
+
[X1000_CLK_TCU] = {
"tcu", CGU_CLK_GATE,
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
@@ -54,6 +54,54 @@
static struct ingenic_cgu *cgu;
+static void x1830_i2s_calc_m_n(const struct ingenic_cgu_pll_info *pll_info,
+ unsigned long rate, unsigned long parent_rate,
+ unsigned int *pm, unsigned int *pn, unsigned int *pod)
+{
+ unsigned int delta, m, n;
+ u64 curr_delta, curr_m, curr_n;
+
+ if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) {
+ m = 1;
+ n = parent_rate / rate;
+ goto out;
+ }
+
+ delta = rate;
+
+ /*
+ * The length of M is 9 bits, its value must be between 1 and 511.
+ * The length of N is 20 bits, its value must be between 2 and 1048575,
+ * and must not be less than 2 times of the value of M.
+ */
+ for (curr_m = 511; curr_m >= 1; curr_m--) {
+ curr_n = parent_rate * curr_m;
+ curr_delta = do_div(curr_n, rate);
+
+ if (curr_n < 2 * curr_m || curr_n > 1048575)
+ continue;
+
+ if (curr_delta == 0)
+ break;
+
+ if (curr_delta < delta) {
+ m = curr_m;
+ n = curr_n;
+ delta = curr_delta;
+ }
+ }
+
+out:
+ *pm = m;
+ *pn = n;
+
+ /*
+ * The I2S PLL does not have OD bits, so set the *pod to 1 to ensure
+ * that the ingenic_pll_calc() in cgu.c can run properly.
+ */
+ *pod = 1;
+}
+
static int x1830_usb_phy_enable(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
@@ -201,6 +249,28 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
},
},
+ [X1830_CLK_I2S] = {
+ "i2s", CGU_CLK_PLL,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .pll = {
+ .reg = CGU_REG_I2SCDR,
+ .rate_multiplier = 1,
+ .mux_shift = 30,
+ .mux_bits = 2,
+ .m_shift = 20,
+ .m_bits = 9,
+ .m_offset = 0,
+ .n_shift = 0,
+ .n_bits = 20,
+ .n_offset = 0,
+ .bypass_bit = -1,
+ .enable_bit = 29,
+ .stable_bit = -1,
+ .calc_m_n_od = x1830_i2s_calc_m_n,
+ },
+ },
+
/* Custom (SoC-specific) OTG PHY */
[X1830_CLK_OTGPHY] = {
@@ -328,6 +398,14 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
.mux = { CGU_REG_SSICDR, 29, 1 },
},
+ [X1830_CLK_CIM] = {
+ "cim", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .mux = { CGU_REG_CIMCDR, 30, 2 },
+ .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 },
+ },
+
[X1830_CLK_EXCLK_DIV512] = {
"exclk_div512", CGU_CLK_FIXDIV,
.parents = { X1830_CLK_EXCLK },
@@ -385,6 +463,18 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR0, 9 },
},
+ [X1830_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 11 },
+ },
+
+ [X1830_CLK_DMIC] = {
+ "dmic", CGU_CLK_GATE,
+ .parents = { X1830_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 12 },
+ },
+
[X1830_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
Add CIM, AIC, DMIC, I2S clocks for the X1000 SoC and the X1830 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> --- Notes: v1->v2: Add I2S clock for X1000. v2->v3: Correct the comment in x1000-cgu.c, change it from "Custom (SoC-specific) OTG PHY" to "Custom (SoC-specific)", since there is more than just the "OTG PHY" clock. v3->v4: No change. v4->v5: 1.Change X1000's I2S clock to CGU_CLK_PLL as Paul Cercueil's suggestion 2.Add I2S clock for X1830. drivers/clk/ingenic/x1000-cgu.c | 88 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/ingenic/x1830-cgu.c | 90 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 178 insertions(+)