diff mbox

[1/5] arm/imx: remove mx31_setup_weimcs() from mx31.h

Message ID 1318832110-29289-2-git-send-email-shawn.guo@linaro.org
State Accepted
Commit f16fcb634894fca5173ad6b3ee8dcc838386eeda
Headers show

Commit Message

Shawn Guo Oct. 17, 2011, 6:15 a.m. UTC
The helper function mx31_setup_weimcs() references IOMEM() and
IMX_IO_P2V() but without required header mach/hardware.h included
in mx31.h.  This will break the build of those mx31 based board file
with no direct inclusion of mach/hardware.h, or when indirect inclusion
to mach/hardware.h breaks.

For example, when the inclusion of mach/hardware.h gets removed from
mach/gpio.h, we will see the following compile error.

  CC      arch/arm/mach-imx/mach-pcm037_eet.o
In file included from arch/arm/mach-imx/devices-imx31.h:9:0,
                 from arch/arm/mach-imx/mach-pcm037_eet.c:20:
arch/arm/plat-mxc/include/mach/mx31.h: In function ‘mx31_setup_weimcs’:
arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IOMEM’
arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ‘IMX_IO_P2V’

This patch removes mx31_setup_weimcs() from mx31.h and makes it local
to mach-qong.c, which is the only user for this helper.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/mach-qong.c         |    5 ++++-
 arch/arm/plat-mxc/include/mach/mx31.h |   14 --------------
 2 files changed, 4 insertions(+), 15 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 1c4822b..4ff5faf 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -190,7 +190,10 @@  static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+	__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+	__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+	__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 79e7fc0..e27619e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,10 +1,6 @@ 
 #ifndef __MACH_MX31_H__
 #define __MACH_MX31_H__
 
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
 /*
  * IRAM
  */
@@ -122,16 +118,6 @@ 
 #define MX31_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX31_IO_ADDRESS(x)		IOMEM(MX31_IO_P2V(x))
 
-#ifndef __ASSEMBLER__
-static inline void mx31_setup_weimcs(size_t cs,
-		unsigned upper, unsigned lower, unsigned addional)
-{
-	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
-	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
-	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
-}
-#endif
-
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5