diff mbox

[Xen-devel,v5,p2,17/19] libxl: Add support for Device Tree passthrough

Message ID 1428592185-18581-18-git-send-email-julien.grall@citrix.com
State New
Headers show

Commit Message

Julien Grall April 9, 2015, 3:09 p.m. UTC 
From: Julien Grall <julien.grall@linaro.org>

On ARM, every non-PCI device are described in the device tree. Each of
them can be found via a path.

This patch introduces a very basic support, only the IOMMU will be set
up correctly. The user will have to:
    - Describe the device in the partial device tree
    - Map manually MMIO/IRQ

This is a first approach, that will allow to have a basic Device Tree
passthrough support in Xen. This could be improved later.

Furthermore add LIBXL_HAVE_DEVICETREE_PASSTHROUGH to indicate we
support Device Tree passthrough and partial device tree (introduced by a
previous patch).

Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>

---
    Changes in v5:
        - Replace some "non-PCI" to "Device Tree"

    Changes in v4:
        - Add LIBXL_HAVE_DEVICTREE_PASSTHROUGH to indicate we support
        non-PCI passthrough. This is also used in order to indicate
        partial device tree is supported
        - Remove libxl_dtdev.c as it contains only a 2 lines functions
        and call directly xc_* from libxl_create.c
        - Introduce domcreate_attach_dtdev

    Changes in v3:
        - Dynamic allocation has been dropped
        - Rework the commit message in accordance with the previous
        item

    Changes in v2:
        - Get DT infos earlier
        - Allocate/map IRQ in libxl__arch_domain_create rather than in
        libxl__device_dt_add
        - Use VIRQ rather than the PIRQ to construct the interrupts
        properties of the device tree
        - Correct cpumask in make_dtdev_node. We allow the interrupt to
        be used on the 8 CPUs
        - Fix LOGE when we map the MMIO region in the guest in
        libxl__device_dt_add. The domain and the IRQ were inverted
        - Calculate the number of SPIs to configure the VGIC
        - xc_physdev_dtdev_* helpers has been renamed to xc_dtdev_*
        - Rename libxl_device_dt to libxl_device_dtdev
---
 tools/libxl/libxl.h          |  6 ++++++
 tools/libxl/libxl_create.c   | 32 ++++++++++++++++++++++++++++++++
 tools/libxl/libxl_internal.h |  5 +++++
 tools/libxl/libxl_types.idl  |  5 +++++
 4 files changed, 48 insertions(+)
diff mbox

Patch

diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 6bc75c5..029354d 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -179,6 +179,12 @@ 
 #define LIBXL_HAVE_BUILDINFO_HVM_MMIO_HOLE_MEMKB 1
 
 /*
+ * libxl_domain_build_info has device_tree and libxl_device_dtdev
+ * exists. This mean Device Tree passthrough is supported for ARM
+ */
+#define LIBXL_HAVE_DEVICETREE_PASSTHROUGH 1
+
+/*
  * libxl ABI compatibility
  *
  * The only guarantee which libxl makes regarding ABI compatibility
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 15b464e..39c828b 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -751,6 +751,8 @@  static void domcreate_attach_vtpms(libxl__egc *egc, libxl__multidev *multidev,
                                    int ret);
 static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *aodevs,
                                  int ret);
+static void domcreate_attach_dtdev(libxl__egc *egc,
+                                   libxl__domain_create_state *dcs);
 
 static void domcreate_console_available(libxl__egc *egc,
                                         libxl__domain_create_state *dcs);
@@ -1444,6 +1446,36 @@  static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
         }
     }
 
+    domcreate_attach_dtdev(egc, dcs);
+    return;
+
+error_out:
+    assert(ret);
+    domcreate_complete(egc, dcs, ret);
+}
+
+static void domcreate_attach_dtdev(libxl__egc *egc,
+                                   libxl__domain_create_state *dcs)
+{
+    STATE_AO_GC(dcs->ao);
+    int i;
+    int ret;
+    int domid = dcs->guest_domid;
+
+    /* convenience aliases */
+    libxl_domain_config *const d_config = dcs->guest_config;
+
+    for (i = 0; i < d_config->num_dtdevs; i++) {
+        const libxl_device_dtdev *dtdev = &d_config->dtdevs[i];
+
+        LOG(DEBUG, "Assign device \"%s\" to dom%u", dtdev->path, domid);
+        ret = xc_assign_dt_device(CTX->xch, domid, dtdev->path);
+        if (ret < 0) {
+            LOG(ERROR, "xc_assign_dtdevice failed: %d\n", ret);
+            goto error_out;
+        }
+    }
+
     domcreate_console_available(egc, dcs);
 
     domcreate_complete(egc, dcs, 0);
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 3aba221..5a7e791 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1199,6 +1199,11 @@  _hidden int libxl__create_pci_backend(libxl__gc *gc, uint32_t domid,
                                       libxl_device_pci *pcidev, int num);
 _hidden int libxl__device_pci_destroy_all(libxl__gc *gc, uint32_t domid);
 
+/* from libxl_dtdev */
+
+_hidden int libxl__device_dt_add(libxl__gc *gc, uint32_t domid,
+                                 const libxl_device_dtdev *dtdev);
+
 /*----- xswait: wait for a xenstore node to be suitable -----*/
 
 typedef struct libxl__xswait_state libxl__xswait_state;
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 9aada5a..4182cbd 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -537,6 +537,10 @@  libxl_device_pci = Struct("device_pci", [
     ("seize", bool),
     ])
 
+libxl_device_dtdev = Struct("device_dtdev", [
+    ("path", string),
+    ])
+
 libxl_device_vtpm = Struct("device_vtpm", [
     ("backend_domid",    libxl_domid),
     ("backend_domname",  string),
@@ -563,6 +567,7 @@  libxl_domain_config = Struct("domain_config", [
     ("disks", Array(libxl_device_disk, "num_disks")),
     ("nics", Array(libxl_device_nic, "num_nics")),
     ("pcidevs", Array(libxl_device_pci, "num_pcidevs")),
+    ("dtdevs", Array(libxl_device_dtdev, "num_dtdevs")),
     ("vfbs", Array(libxl_device_vfb, "num_vfbs")),
     ("vkbs", Array(libxl_device_vkb, "num_vkbs")),
     ("vtpms", Array(libxl_device_vtpm, "num_vtpms")),