diff mbox

[v2] greybus: Move briged phy structure definitions into gpbridge.h

Message ID 1428620491-9150-1-git-send-email-john.stultz@linaro.org
State New
Headers show

Commit Message

John Stultz April 9, 2015, 11:01 p.m. UTC
In order to facilitate re-use of the gpio, i2c, pwm and i2s
structures, split them out of independent files and add
them into a shared gpbridge.h

This will be a prereq to sharing these headers w/ gbsim.

Cc: Alex Elder <alex.elder@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@google.com>
CC: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Remove greybus.h header inclusion

 gpbridge.h | 412 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 gpio.c     | 105 +---------------
 i2c.c      |  57 +--------
 i2s.h      | 145 ----------------------
 pwm.c      |  48 +------
 5 files changed, 416 insertions(+), 351 deletions(-)
 create mode 100644 gpbridge.h
 delete mode 100644 i2s.h
diff mbox

Patch

diff --git a/gpbridge.h b/gpbridge.h
new file mode 100644
index 0000000..8888238
--- /dev/null
+++ b/gpbridge.h
@@ -0,0 +1,412 @@ 
+#ifndef __GB_GPBRIDGE_H__
+#define __GB_GPBRIDGE_H__
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2014 - 2015 Google Inc. All rights reserved.
+ * Copyright(c) 2014 - 2015 Linaro Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License version 2 for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 - 2015 Google Inc. All rights reserved.
+ * Copyright(c) 2014 - 2015 Linaro Ltd. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name of Google Inc. or Linaro Ltd. nor the names of
+ *    its contributors may be used to endorse or promote products
+ *    derived from this software without specific prior written
+ *    permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GOOGLE INC. OR
+ * LINARO LTD. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/* I2C */
+
+/* Version of the Greybus i2c protocol we support */
+#define	GB_I2C_VERSION_MAJOR		0x00
+#define	GB_I2C_VERSION_MINOR		0x01
+
+/* Greybus i2c request types */
+#define	GB_I2C_TYPE_INVALID		0x00
+#define	GB_I2C_TYPE_PROTOCOL_VERSION	0x01
+#define	GB_I2C_TYPE_FUNCTIONALITY	0x02
+#define	GB_I2C_TYPE_TIMEOUT		0x03
+#define	GB_I2C_TYPE_RETRIES		0x04
+#define	GB_I2C_TYPE_TRANSFER		0x05
+#define	GB_I2C_TYPE_RESPONSE		0x80	/* OR'd with rest */
+
+#define	GB_I2C_RETRIES_DEFAULT		3
+#define	GB_I2C_TIMEOUT_DEFAULT		1000	/* milliseconds */
+
+/* functionality request has no payload */
+struct gb_i2c_functionality_response {
+	__le32	functionality;
+};
+
+struct gb_i2c_timeout_request {
+	__le16	msec;
+};
+/* timeout response has no payload */
+
+struct gb_i2c_retries_request {
+	__u8	retries;
+};
+/* retries response has no payload */
+
+/*
+ * Outgoing data immediately follows the op count and ops array.
+ * The data for each write (master -> slave) op in the array is sent
+ * in order, with no (e.g. pad) bytes separating them.
+ *
+ * Short reads cause the entire transfer request to fail So response
+ * payload consists only of bytes read, and the number of bytes is
+ * exactly what was specified in the corresponding op.  Like
+ * outgoing data, the incoming data is in order and contiguous.
+ */
+struct gb_i2c_transfer_op {
+	__le16	addr;
+	__le16	flags;
+	__le16	size;
+};
+
+struct gb_i2c_transfer_request {
+	__le16				op_count;
+	struct gb_i2c_transfer_op	ops[0];		/* op_count of these */
+};
+struct gb_i2c_transfer_response {
+	__u8				data[0];	/* inbound data */
+};
+
+
+/* GPIO */
+
+/* Version of the Greybus GPIO protocol we support */
+#define	GB_GPIO_VERSION_MAJOR		0x00
+#define	GB_GPIO_VERSION_MINOR		0x01
+
+/* Greybus GPIO request types */
+#define	GB_GPIO_TYPE_INVALID		0x00
+#define	GB_GPIO_TYPE_PROTOCOL_VERSION	0x01
+#define	GB_GPIO_TYPE_LINE_COUNT		0x02
+#define	GB_GPIO_TYPE_ACTIVATE		0x03
+#define	GB_GPIO_TYPE_DEACTIVATE		0x04
+#define	GB_GPIO_TYPE_GET_DIRECTION	0x05
+#define	GB_GPIO_TYPE_DIRECTION_IN	0x06
+#define	GB_GPIO_TYPE_DIRECTION_OUT	0x07
+#define	GB_GPIO_TYPE_GET_VALUE		0x08
+#define	GB_GPIO_TYPE_SET_VALUE		0x09
+#define	GB_GPIO_TYPE_SET_DEBOUNCE	0x0a
+#define GB_GPIO_TYPE_IRQ_TYPE		0x0b
+#define GB_GPIO_TYPE_IRQ_ACK		0x0c
+#define GB_GPIO_TYPE_IRQ_MASK		0x0d
+#define GB_GPIO_TYPE_IRQ_UNMASK		0x0e
+#define GB_GPIO_TYPE_IRQ_EVENT		0x0f
+#define	GB_GPIO_TYPE_RESPONSE		0x80	/* OR'd with rest */
+
+#define	GB_GPIO_DEBOUNCE_USEC_DEFAULT	0	/* microseconds */
+
+/* line count request has no payload */
+struct gb_gpio_line_count_response {
+	__u8	count;
+};
+
+struct gb_gpio_activate_request {
+	__u8	which;
+};
+/* activate response has no payload */
+
+struct gb_gpio_deactivate_request {
+	__u8	which;
+};
+/* deactivate response has no payload */
+
+struct gb_gpio_get_direction_request {
+	__u8	which;
+};
+struct gb_gpio_get_direction_response {
+	__u8	direction;
+};
+
+struct gb_gpio_direction_in_request {
+	__u8	which;
+};
+/* direction in response has no payload */
+
+struct gb_gpio_direction_out_request {
+	__u8	which;
+	__u8	value;
+};
+/* direction out response has no payload */
+
+struct gb_gpio_get_value_request {
+	__u8	which;
+};
+struct gb_gpio_get_value_response {
+	__u8	value;
+};
+
+struct gb_gpio_set_value_request {
+	__u8	which;
+	__u8	value;
+};
+/* set value response has no payload */
+
+struct gb_gpio_set_debounce_request {
+	__u8	which;
+	__le16	usec __packed;
+};
+/* debounce response has no payload */
+
+struct gb_gpio_irq_type_request {
+	__u8	which;
+	__u8	type;
+};
+/* irq type response has no payload */
+
+struct gb_gpio_irq_mask_request {
+	__u8	which;
+};
+/* irq mask response has no payload */
+
+struct gb_gpio_irq_unmask_request {
+	__u8	which;
+};
+/* irq unmask response has no payload */
+
+struct gb_gpio_irq_ack_request {
+	__u8	which;
+};
+/* irq ack response has no payload */
+
+/* irq event requests originate on another module and are handled on the AP */
+struct gb_gpio_irq_event_request {
+	__u8	which;
+};
+/* irq event response has no payload */
+
+
+/* PWM */
+
+/* Version of the Greybus PWM protocol we support */
+#define	GB_PWM_VERSION_MAJOR		0x00
+#define	GB_PWM_VERSION_MINOR		0x01
+
+/* Greybus PWM request types */
+#define	GB_PWM_TYPE_INVALID		0x00
+#define	GB_PWM_TYPE_PROTOCOL_VERSION	0x01
+#define	GB_PWM_TYPE_PWM_COUNT		0x02
+#define	GB_PWM_TYPE_ACTIVATE		0x03
+#define	GB_PWM_TYPE_DEACTIVATE		0x04
+#define	GB_PWM_TYPE_CONFIG		0x05
+#define	GB_PWM_TYPE_POLARITY		0x06
+#define	GB_PWM_TYPE_ENABLE		0x07
+#define	GB_PWM_TYPE_DISABLE		0x08
+#define	GB_PWM_TYPE_RESPONSE		0x80	/* OR'd with rest */
+
+/* pwm count request has no payload */
+struct gb_pwm_count_response {
+	__u8	count;
+};
+
+struct gb_pwm_activate_request {
+	__u8	which;
+};
+
+struct gb_pwm_deactivate_request {
+	__u8	which;
+};
+
+struct gb_pwm_config_request {
+	__u8	which;
+	__le32	duty __packed;
+	__le32	period __packed;
+};
+
+struct gb_pwm_polarity_request {
+	__u8	which;
+	__u8	polarity;
+};
+
+struct gb_pwm_enable_request {
+	__u8	which;
+};
+
+struct gb_pwm_disable_request {
+	__u8	which;
+};
+
+/* I2S */
+#ifndef BIT
+#define BIT(n) (1UL << (n))
+#endif
+
+#define GB_I2S_MGMT_TYPE_PROTOCOL_VERSION		0x01
+#define GB_I2S_MGMT_TYPE_GET_SUPPORTED_CONFIGURATIONS	0x02
+#define GB_I2S_MGMT_TYPE_SET_CONFIGURATION		0x03
+#define GB_I2S_MGMT_TYPE_SET_SAMPLES_PER_MESSAGE	0x04
+#define GB_I2S_MGMT_TYPE_GET_PROCESSING_DELAY		0x05
+#define GB_I2S_MGMT_TYPE_SET_START_DELAY		0x06
+#define GB_I2S_MGMT_TYPE_ACTIVATE_CPORT			0x07
+#define GB_I2S_MGMT_TYPE_DEACTIVATE_CPORT		0x08
+#define GB_I2S_MGMT_TYPE_REPORT_EVENT			0x09
+
+#define GB_I2S_MGMT_BYTE_ORDER_NA			BIT(0)
+#define GB_I2S_MGMT_BYTE_ORDER_BE			BIT(1)
+#define GB_I2S_MGMT_BYTE_ORDER_LE			BIT(2)
+
+#define GB_I2S_MGMT_SPATIAL_LOCATION_FL			BIT(0)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_FR			BIT(1)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_FC			BIT(2)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_LFE		BIT(3)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_BL			BIT(4)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_BR			BIT(5)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_FLC		BIT(6)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_FRC		BIT(7)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_C			BIT(8) /* BC in USB */
+#define GB_I2S_MGMT_SPATIAL_LOCATION_SL			BIT(9)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_SR			BIT(10)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TC			BIT(11)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TFL		BIT(12)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TFC		BIT(13)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TFR		BIT(14)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TBL		BIT(15)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TBC		BIT(16)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TBR		BIT(17)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TFLC		BIT(18)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TFRC		BIT(19)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_LLFE		BIT(20)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_RLFE		BIT(21)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TSL		BIT(22)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_TSR		BIT(23)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_BC			BIT(24)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_BLC		BIT(25)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_BRC		BIT(26)
+#define GB_I2S_MGMT_SPATIAL_LOCATION_RD			BIT(31)
+
+#define GB_I2S_MGMT_PROTOCOL_PCM			BIT(0)
+#define GB_I2S_MGMT_PROTOCOL_I2S			BIT(1)
+#define GB_I2S_MGMT_PROTOCOL_LR_STEREO			BIT(2)
+
+#define GB_I2S_MGMT_ROLE_MASTER				BIT(0)
+#define GB_I2S_MGMT_ROLE_SLAVE				BIT(1)
+
+#define GB_I2S_MGMT_POLARITY_NORMAL			BIT(0)
+#define GB_I2S_MGMT_POLARITY_REVERSED			BIT(1)
+
+#define GB_I2S_MGMT_EDGE_RISING				BIT(0)
+#define GB_I2S_MGMT_EDGE_FALLING			BIT(1)
+
+#define GB_I2S_MGMT_EVENT_UNSPECIFIED			0x1
+#define GB_I2S_MGMT_EVENT_HALT				0x2
+#define GB_I2S_MGMT_EVENT_INTERNAL_ERROR		0x3
+#define GB_I2S_MGMT_EVENT_PROTOCOL_ERROR		0x4
+#define GB_I2S_MGMT_EVENT_FAILURE			0x5
+#define GB_I2S_MGMT_EVENT_OUT_OF_SEQUENCE		0x6
+#define GB_I2S_MGMT_EVENT_UNDERRUN			0x7
+#define GB_I2S_MGMT_EVENT_OVERRUN			0x8
+#define GB_I2S_MGMT_EVENT_CLOCKING			0x9
+#define GB_I2S_MGMT_EVENT_DATA_LEN			0xa
+
+struct gb_i2s_mgmt_configuration {
+	__le32	sample_frequency;
+	__u8	num_channels;
+	__u8	bytes_per_channel;
+	__u8	byte_order;
+	__u8	pad;
+	__le32	spatial_locations;
+	__le32	ll_protocol;
+	__u8	ll_bclk_role;
+	__u8	ll_wclk_role;
+	__u8	ll_wclk_polarity;
+	__u8	ll_wclk_change_edge;
+	__u8	ll_wclk_tx_edge;
+	__u8	ll_wclk_rx_edge;
+	__u8	ll_data_offset;
+	__u8	ll_pad;
+};
+
+/* get supported configurations request has no payload */
+struct gb_i2s_mgmt_get_supported_configurations_response {
+	__u8					config_count;
+	__u8					pad[3];
+	struct gb_i2s_mgmt_configuration	config[0];
+};
+
+struct gb_i2s_mgmt_set_configuration_request {
+	struct gb_i2s_mgmt_configuration	config;
+};
+/* set configuration response has no payload */
+
+struct gb_i2s_mgmt_set_samples_per_message_request {
+	__le16	samples_per_message;
+};
+/* set samples per message response has no payload */
+
+/* get processing request delay has no payload */
+struct gb_i2s_mgmt_get_processing_delay_response {
+	__le32	microseconds;
+};
+
+struct gb_i2s_mgmt_set_start_delay_request {
+	__le32	microseconds;
+};
+/* set start delay response has no payload */
+
+struct gb_i2s_mgmt_activate_cport_request {
+	__le16	cport;
+};
+/* activate cport response has no payload */
+
+struct gb_i2s_mgmt_deactivate_cport_request {
+	__le16	cport;
+};
+/* deactivate cport response has no payload */
+
+struct gb_i2s_mgmt_report_event_request {
+	__u8	event;
+};
+/* report event response has no payload */
+
+#define GB_I2S_DATA_TYPE_PROTOCOL_VERSION		0x01
+#define GB_I2S_DATA_TYPE_SEND_DATA			0x02
+
+struct gb_i2s_send_data_request {
+	__le32	sample_number;
+	__le32	size;
+	__u8	data[0];
+};
+/* send data has no response at all */
+
+#endif /* __GB_GPBRIDGE_H__ */
diff --git a/gpio.c b/gpio.c
index 20917bf..5ed1895 100644
--- a/gpio.c
+++ b/gpio.c
@@ -14,6 +14,7 @@ 
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include "greybus.h"
+#include "gpbridge.h"
 
 struct gb_gpio_line {
 	/* The following has to be an array of line_max entries */
@@ -43,110 +44,6 @@  struct gb_gpio_controller {
 	container_of(chip, struct gb_gpio_controller, chip)
 #define irq_data_to_gpio_chip(d) (d->domain->host_data)
 
-/* Version of the Greybus GPIO protocol we support */
-#define	GB_GPIO_VERSION_MAJOR		0x00
-#define	GB_GPIO_VERSION_MINOR		0x01
-
-/* Greybus GPIO request types */
-#define	GB_GPIO_TYPE_INVALID		0x00
-#define	GB_GPIO_TYPE_PROTOCOL_VERSION	0x01
-#define	GB_GPIO_TYPE_LINE_COUNT		0x02
-#define	GB_GPIO_TYPE_ACTIVATE		0x03
-#define	GB_GPIO_TYPE_DEACTIVATE		0x04
-#define	GB_GPIO_TYPE_GET_DIRECTION	0x05
-#define	GB_GPIO_TYPE_DIRECTION_IN	0x06
-#define	GB_GPIO_TYPE_DIRECTION_OUT	0x07
-#define	GB_GPIO_TYPE_GET_VALUE		0x08
-#define	GB_GPIO_TYPE_SET_VALUE		0x09
-#define	GB_GPIO_TYPE_SET_DEBOUNCE	0x0a
-#define GB_GPIO_TYPE_IRQ_TYPE		0x0b
-#define GB_GPIO_TYPE_IRQ_ACK		0x0c
-#define GB_GPIO_TYPE_IRQ_MASK		0x0d
-#define GB_GPIO_TYPE_IRQ_UNMASK		0x0e
-#define GB_GPIO_TYPE_IRQ_EVENT		0x0f
-#define	GB_GPIO_TYPE_RESPONSE		0x80	/* OR'd with rest */
-
-#define	GB_GPIO_DEBOUNCE_USEC_DEFAULT	0	/* microseconds */
-
-/* line count request has no payload */
-struct gb_gpio_line_count_response {
-	__u8	count;
-};
-
-struct gb_gpio_activate_request {
-	__u8	which;
-};
-/* activate response has no payload */
-
-struct gb_gpio_deactivate_request {
-	__u8	which;
-};
-/* deactivate response has no payload */
-
-struct gb_gpio_get_direction_request {
-	__u8	which;
-};
-struct gb_gpio_get_direction_response {
-	__u8	direction;
-};
-
-struct gb_gpio_direction_in_request {
-	__u8	which;
-};
-/* direction in response has no payload */
-
-struct gb_gpio_direction_out_request {
-	__u8	which;
-	__u8	value;
-};
-/* direction out response has no payload */
-
-struct gb_gpio_get_value_request {
-	__u8	which;
-};
-struct gb_gpio_get_value_response {
-	__u8	value;
-};
-
-struct gb_gpio_set_value_request {
-	__u8	which;
-	__u8	value;
-};
-/* set value response has no payload */
-
-struct gb_gpio_set_debounce_request {
-	__u8	which;
-	__le16	usec __packed;
-};
-/* debounce response has no payload */
-
-struct gb_gpio_irq_type_request {
-	__u8	which;
-	__u8	type;
-};
-/* irq type response has no payload */
-
-struct gb_gpio_irq_mask_request {
-	__u8	which;
-};
-/* irq mask response has no payload */
-
-struct gb_gpio_irq_unmask_request {
-	__u8	which;
-};
-/* irq unmask response has no payload */
-
-struct gb_gpio_irq_ack_request {
-	__u8	which;
-};
-/* irq ack response has no payload */
-
-/* irq event requests originate on another module and are handled on the AP */
-struct gb_gpio_irq_event_request {
-	__u8	which;
-};
-/* irq event response has no payload */
-
 /* Define get_version() routine */
 define_get_version(gb_gpio_controller, GPIO);
 
diff --git a/i2c.c b/i2c.c
index 84d20e5..6fdbf11 100644
--- a/i2c.c
+++ b/i2c.c
@@ -13,6 +13,8 @@ 
 #include <linux/i2c.h>
 
 #include "greybus.h"
+#include "gpbridge.h"
+
 
 struct gb_i2c_device {
 	struct gb_connection	*connection;
@@ -26,61 +28,6 @@  struct gb_i2c_device {
 	struct i2c_adapter	adapter;
 };
 
-/* Version of the Greybus i2c protocol we support */
-#define	GB_I2C_VERSION_MAJOR		0x00
-#define	GB_I2C_VERSION_MINOR		0x01
-
-/* Greybus i2c request types */
-#define	GB_I2C_TYPE_INVALID		0x00
-#define	GB_I2C_TYPE_PROTOCOL_VERSION	0x01
-#define	GB_I2C_TYPE_FUNCTIONALITY	0x02
-#define	GB_I2C_TYPE_TIMEOUT		0x03
-#define	GB_I2C_TYPE_RETRIES		0x04
-#define	GB_I2C_TYPE_TRANSFER		0x05
-#define	GB_I2C_TYPE_RESPONSE		0x80	/* OR'd with rest */
-
-#define	GB_I2C_RETRIES_DEFAULT		3
-#define	GB_I2C_TIMEOUT_DEFAULT		1000	/* milliseconds */
-
-/* functionality request has no payload */
-struct gb_i2c_functionality_response {
-	__le32	functionality;
-};
-
-struct gb_i2c_timeout_request {
-	__le16	msec;
-};
-/* timeout response has no payload */
-
-struct gb_i2c_retries_request {
-	__u8	retries;
-};
-/* retries response has no payload */
-
-/*
- * Outgoing data immediately follows the op count and ops array.
- * The data for each write (master -> slave) op in the array is sent
- * in order, with no (e.g. pad) bytes separating them.
- *
- * Short reads cause the entire transfer request to fail So response
- * payload consists only of bytes read, and the number of bytes is
- * exactly what was specified in the corresponding op.  Like
- * outgoing data, the incoming data is in order and contiguous.
- */
-struct gb_i2c_transfer_op {
-	__le16	addr;
-	__le16	flags;
-	__le16	size;
-};
-
-struct gb_i2c_transfer_request {
-	__le16				op_count;
-	struct gb_i2c_transfer_op	ops[0];		/* op_count of these */
-};
-struct gb_i2c_transfer_response {
-	__u8				data[0];	/* inbound data */
-};
-
 /* Define get_version() routine */
 define_get_version(gb_i2c_device, I2C);
 
diff --git a/i2s.h b/i2s.h
deleted file mode 100644
index 5c42756..0000000
--- a/i2s.h
+++ /dev/null
@@ -1,145 +0,0 @@ 
-#ifndef __GB_I2S_H__
-#define __GB_I2S_H__
-
-#ifndef BIT
-#define BIT(n) (1UL << (n))
-#endif
-
-#define GB_I2S_MGMT_TYPE_PROTOCOL_VERSION		0x01
-#define GB_I2S_MGMT_TYPE_GET_SUPPORTED_CONFIGURATIONS	0x02
-#define GB_I2S_MGMT_TYPE_SET_CONFIGURATION		0x03
-#define GB_I2S_MGMT_TYPE_SET_SAMPLES_PER_MESSAGE	0x04
-#define GB_I2S_MGMT_TYPE_GET_PROCESSING_DELAY		0x05
-#define GB_I2S_MGMT_TYPE_SET_START_DELAY		0x06
-#define GB_I2S_MGMT_TYPE_ACTIVATE_CPORT			0x07
-#define GB_I2S_MGMT_TYPE_DEACTIVATE_CPORT		0x08
-#define GB_I2S_MGMT_TYPE_REPORT_EVENT			0x09
-
-#define GB_I2S_MGMT_BYTE_ORDER_NA			BIT(0)
-#define GB_I2S_MGMT_BYTE_ORDER_BE			BIT(1)
-#define GB_I2S_MGMT_BYTE_ORDER_LE			BIT(2)
-
-#define GB_I2S_MGMT_SPATIAL_LOCATION_FL			BIT(0)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_FR			BIT(1)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_FC			BIT(2)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_LFE		BIT(3)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_BL			BIT(4)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_BR			BIT(5)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_FLC		BIT(6)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_FRC		BIT(7)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_C			BIT(8) /* BC in USB */
-#define GB_I2S_MGMT_SPATIAL_LOCATION_SL			BIT(9)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_SR			BIT(10)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TC			BIT(11)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TFL		BIT(12)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TFC		BIT(13)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TFR		BIT(14)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TBL		BIT(15)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TBC		BIT(16)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TBR		BIT(17)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TFLC		BIT(18)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TFRC		BIT(19)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_LLFE		BIT(20)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_RLFE		BIT(21)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TSL		BIT(22)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_TSR		BIT(23)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_BC			BIT(24)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_BLC		BIT(25)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_BRC		BIT(26)
-#define GB_I2S_MGMT_SPATIAL_LOCATION_RD			BIT(31)
-
-#define GB_I2S_MGMT_PROTOCOL_PCM			BIT(0)
-#define GB_I2S_MGMT_PROTOCOL_I2S			BIT(1)
-#define GB_I2S_MGMT_PROTOCOL_LR_STEREO			BIT(2)
-
-#define GB_I2S_MGMT_ROLE_MASTER				BIT(0)
-#define GB_I2S_MGMT_ROLE_SLAVE				BIT(1)
-
-#define GB_I2S_MGMT_POLARITY_NORMAL			BIT(0)
-#define GB_I2S_MGMT_POLARITY_REVERSED			BIT(1)
-
-#define GB_I2S_MGMT_EDGE_RISING				BIT(0)
-#define GB_I2S_MGMT_EDGE_FALLING			BIT(1)
-
-#define GB_I2S_MGMT_EVENT_UNSPECIFIED			0x1
-#define GB_I2S_MGMT_EVENT_HALT				0x2
-#define GB_I2S_MGMT_EVENT_INTERNAL_ERROR		0x3
-#define GB_I2S_MGMT_EVENT_PROTOCOL_ERROR		0x4
-#define GB_I2S_MGMT_EVENT_FAILURE			0x5
-#define GB_I2S_MGMT_EVENT_OUT_OF_SEQUENCE		0x6
-#define GB_I2S_MGMT_EVENT_UNDERRUN			0x7
-#define GB_I2S_MGMT_EVENT_OVERRUN			0x8
-#define GB_I2S_MGMT_EVENT_CLOCKING			0x9
-#define GB_I2S_MGMT_EVENT_DATA_LEN			0xa
-
-struct gb_i2s_mgmt_configuration {
-	__le32	sample_frequency;
-	__u8	num_channels;
-	__u8	bytes_per_channel;
-	__u8	byte_order;
-	__u8	pad;
-	__le32	spatial_locations;
-	__le32	ll_protocol;
-	__u8	ll_bclk_role;
-	__u8	ll_wclk_role;
-	__u8	ll_wclk_polarity;
-	__u8	ll_wclk_change_edge;
-	__u8	ll_wclk_tx_edge;
-	__u8	ll_wclk_rx_edge;
-	__u8	ll_data_offset;
-	__u8	ll_pad;
-};
-
-/* get supported configurations request has no payload */
-struct gb_i2s_mgmt_get_supported_configurations_response {
-	__u8					config_count;
-	__u8					pad[3];
-	struct gb_i2s_mgmt_configuration	config[0];
-};
-
-struct gb_i2s_mgmt_set_configuration_request {
-	struct gb_i2s_mgmt_configuration	config;
-};
-/* set configuration response has no payload */
-
-struct gb_i2s_mgmt_set_samples_per_message_request {
-	__le16	samples_per_message;
-};
-/* set samples per message response has no payload */
-
-/* get processing request delay has no payload */
-struct gb_i2s_mgmt_get_processing_delay_response {
-	__le32	microseconds;
-};
-
-struct gb_i2s_mgmt_set_start_delay_request {
-	__le32	microseconds;
-};
-/* set start delay response has no payload */
-
-struct gb_i2s_mgmt_activate_cport_request {
-	__le16	cport;
-};
-/* activate cport response has no payload */
-
-struct gb_i2s_mgmt_deactivate_cport_request {
-	__le16	cport;
-};
-/* deactivate cport response has no payload */
-
-struct gb_i2s_mgmt_report_event_request {
-	__u8	event;
-};
-/* report event response has no payload */
-
-#define GB_I2S_DATA_TYPE_PROTOCOL_VERSION		0x01
-#define GB_I2S_DATA_TYPE_SEND_DATA			0x02
-
-struct gb_i2s_send_data_request {
-	__le32	sample_number;
-	__le32	size;
-	__u8	data[0];
-};
-/* send data has no response at all */
-
-#endif /* __GB_I2S_H__ */
diff --git a/pwm.c b/pwm.c
index 4e38b8a..7495716 100644
--- a/pwm.c
+++ b/pwm.c
@@ -12,6 +12,7 @@ 
 #include <linux/slab.h>
 #include <linux/pwm.h>
 #include "greybus.h"
+#include "gpbridge.h"
 
 struct gb_pwm_chip {
 	struct gb_connection	*connection;
@@ -25,53 +26,6 @@  struct gb_pwm_chip {
 #define pwm_chip_to_gb_pwm_chip(chip) \
 	container_of(chip, struct gb_pwm_chip, chip)
 
-/* Version of the Greybus PWM protocol we support */
-#define	GB_PWM_VERSION_MAJOR		0x00
-#define	GB_PWM_VERSION_MINOR		0x01
-
-/* Greybus PWM request types */
-#define	GB_PWM_TYPE_INVALID		0x00
-#define	GB_PWM_TYPE_PROTOCOL_VERSION	0x01
-#define	GB_PWM_TYPE_PWM_COUNT		0x02
-#define	GB_PWM_TYPE_ACTIVATE		0x03
-#define	GB_PWM_TYPE_DEACTIVATE		0x04
-#define	GB_PWM_TYPE_CONFIG		0x05
-#define	GB_PWM_TYPE_POLARITY		0x06
-#define	GB_PWM_TYPE_ENABLE		0x07
-#define	GB_PWM_TYPE_DISABLE		0x08
-#define	GB_PWM_TYPE_RESPONSE		0x80	/* OR'd with rest */
-
-/* pwm count request has no payload */
-struct gb_pwm_count_response {
-	__u8	count;
-};
-
-struct gb_pwm_activate_request {
-	__u8	which;
-};
-
-struct gb_pwm_deactivate_request {
-	__u8	which;
-};
-
-struct gb_pwm_config_request {
-	__u8	which;
-	__le32	duty __packed;
-	__le32	period __packed;
-};
-
-struct gb_pwm_polarity_request {
-	__u8	which;
-	__u8	polarity;
-};
-
-struct gb_pwm_enable_request {
-	__u8	which;
-};
-
-struct gb_pwm_disable_request {
-	__u8	which;
-};
 
 /* Define get_version() routine */
 define_get_version(gb_pwm_chip, PWM);