@@ -42,6 +42,24 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
return ret;
}
+static int pm8916_reboot_mode_write_imem(struct reboot_mode_driver *reboot,
+ unsigned int magic)
+{
+ struct pm8916_pon *pon = container_of(reboot, struct pm8916_pon,
+ reboot_mode);
+ void __iomem *imem;
+
+ imem = devm_ioremap(pon->dev, pon->baseaddr, 4);
+ if (!imem) {
+ dev_err(pon->dev, "failed to map imem\n");
+ return -ENOMEM;
+ }
+
+ writel(magic, imem);
+
+ return 0;
+}
+
static int pm8916_pon_probe(struct platform_device *pdev)
{
struct pm8916_pon *pon;
@@ -66,7 +84,12 @@ static int pm8916_pon_probe(struct platform_device *pdev)
pon->reboot_mode.dev = &pdev->dev;
pon->reason_shift = (long)of_device_get_match_data(&pdev->dev);
- pon->reboot_mode.write = pm8916_reboot_mode_write;
+
+ if (device_property_present(&pdev->dev, "qcom,mode-in-imem"))
+ pon->reboot_mode.write = pm8916_reboot_mode_write_imem;
+ else
+ pon->reboot_mode.write = pm8916_reboot_mode_write;
+
error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
if (error) {
dev_err(&pdev->dev, "can't register reboot mode\n");
Add support for DT property 'qcom,mode-in-imem', which is used on devices like Sony Xperia M4 Aqua phone (MSM8939) to store a different set of mode values IMEM rather than PON register. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- drivers/power/reset/qcom-pon.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) -- 2.17.1