| Message ID | 20210706230702.299047-2-bryan.odonoghue@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | pm8150b qmp phy type-c orientation fixes | expand |
Him On Wed, 7 Jul 2021 at 02:05, Bryan O'Donoghue <bryan.odonoghue@linaro.org> wrote: > > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Use 'lanes' as SuperSpeed lanes device node instead of just 'lane' to > fix issues with TypeC support. I think this should not be required anymore, it is a leftover from the previous series which used strcmp("lanes") to create phys. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Fixes: be0624b99042 ("arm64: dts: qcom: sm8250: Add USB and PHY device nodes") > Cc: robh+dt@kernel.org > Cc: devicetree@vger.kernel.org > Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index 4c0de12aaba6..270d7ff59ec1 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -2123,7 +2123,7 @@ usb_2_qmpphy: phy@88eb000 { > <&gcc GCC_USB3_PHY_SEC_BCR>; > reset-names = "phy", "common"; > > - usb_2_ssphy: lane@88eb200 { > + usb_2_ssphy: lanes@88eb200 { > reg = <0 0x088eb200 0 0x200>, > <0 0x088eb400 0 0x200>, > <0 0x088eb800 0 0x800>; > -- > 2.30.1 > -- With best wishes Dmitry
On 07/07/2021 00:26, Dmitry Baryshkov wrote: > Him > > On Wed, 7 Jul 2021 at 02:05, Bryan O'Donoghue > <bryan.odonoghue@linaro.org> wrote: >> >> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >> >> Use 'lanes' as SuperSpeed lanes device node instead of just 'lane' to >> fix issues with TypeC support. > > I think this should not be required anymore, it is a leftover from the > previous series which used strcmp("lanes") to create phys. > >> >> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >> Fixes: be0624b99042 ("arm64: dts: qcom: sm8250: Add USB and PHY device nodes") >> Cc: robh+dt@kernel.org >> Cc: devicetree@vger.kernel.org >> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >> --- >> arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi >> index 4c0de12aaba6..270d7ff59ec1 100644 >> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi >> @@ -2123,7 +2123,7 @@ usb_2_qmpphy: phy@88eb000 { >> <&gcc GCC_USB3_PHY_SEC_BCR>; >> reset-names = "phy", "common"; >> >> - usb_2_ssphy: lane@88eb200 { >> + usb_2_ssphy: lanes@88eb200 { >> reg = <0 0x088eb200 0 0x200>, >> <0 0x088eb400 0 0x200>, >> <0 0x088eb800 0 0x800>; >> -- >> 2.30.1 >> > > > -- > With best wishes > Dmitry > Ok great.
On Tue 06 Jul 18:07 CDT 2021, Bryan O'Donoghue wrote: > From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Use 'lanes' as SuperSpeed lanes device node instead of just 'lane' to > fix issues with TypeC support. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Fixes: be0624b99042 ("arm64: dts: qcom: sm8250: Add USB and PHY device nodes") > Cc: robh+dt@kernel.org > Cc: devicetree@vger.kernel.org > Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index 4c0de12aaba6..270d7ff59ec1 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -2123,7 +2123,7 @@ usb_2_qmpphy: phy@88eb000 { > <&gcc GCC_USB3_PHY_SEC_BCR>; > reset-names = "phy", "common"; > > - usb_2_ssphy: lane@88eb200 { > + usb_2_ssphy: lanes@88eb200 { The uni-phy binding says that this should be named "^phy@[0-9a-f]+$" So while Dmitry is right about the logic in the driver, it would be nice if you would spin this patch to make us pass the dt-binding check - which can be sent independently from the driver patch. Regards, Bjorn > reg = <0 0x088eb200 0 0x200>, > <0 0x088eb400 0 0x200>, > <0 0x088eb800 0 0x800>; > -- > 2.30.1 >
On 07/07/2021 01:04, Bjorn Andersson wrote: > So while Dmitry is right about the logic in the driver, it would be nice > if you would spin this patch to make us pass the dt-binding check - > which can be sent independently from the driver patch. ok
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 4c0de12aaba6..270d7ff59ec1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2123,7 +2123,7 @@ usb_2_qmpphy: phy@88eb000 { <&gcc GCC_USB3_PHY_SEC_BCR>; reset-names = "phy", "common"; - usb_2_ssphy: lane@88eb200 { + usb_2_ssphy: lanes@88eb200 { reg = <0 0x088eb200 0 0x200>, <0 0x088eb400 0 0x200>, <0 0x088eb800 0 0x800>;