| Message ID | 49260184.kfMIbaSn9k@mars |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] usb: serial: option: Add support for u-blox LARA-R6 family | expand |
On Mon, Jul 05, 2021 at 07:44:21PM +0000, Marco De Marco wrote: > The patch is meant to support LARA-R6 Cat 1 module family. > > Module USB ID: > Vendor ID: 0x05c6 > Product ID: 0x90fA > > Interface layout: > If 0: Diagnostic > If 1: AT parser > If 2: AT parser > If 3: QMI wwan (not available in all versions) > > Signed-off-by: Marco De Marco <marco.demarco@posteo.net> > > --- > > ADB interface is not available. > Diagnostic interface (If 0) can be used with option driver. > > Output of usb-devices command (this version does not have QMI WWAN): > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=05c6 ProdID=90fa Rev=00.00 > S: Manufacturer=Qualcomm, Incorporated > S: Product=Qualcomm CDMA Technologies MSM > S: SerialNumber=7da8aacd > C: #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=500mA > I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) Now applied, thanks! Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index aeaa3756f..32d1eac8c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -238,6 +238,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_UC15 0x9090 /* These u-blox products use Qualcomm's vendor ID */ #define UBLOX_PRODUCT_R410M 0x90b2 +#define UBLOX_PRODUCT_R6XX 0x90fa /* These Yuga products use Qualcomm's vendor ID */ #define YUGA_PRODUCT_CLM920_NC5 0x9625 @@ -1101,6 +1102,8 @@ static const struct usb_device_id option_ids[] = { /* u-blox products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), .driver_info = RSVD(1) | RSVD(3) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX), + .driver_info = RSVD(3) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), .driver_info = NUMEP2 },
The patch is meant to support LARA-R6 Cat 1 module family. Module USB ID: Vendor ID: 0x05c6 Product ID: 0x90fA Interface layout: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: QMI wwan (not available in all versions) Signed-off-by: Marco De Marco <marco.demarco@posteo.net> --- ADB interface is not available. Diagnostic interface (If 0) can be used with option driver. Output of usb-devices command (this version does not have QMI WWAN): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=90fa Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=7da8aacd C: #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) Thanks for your patience and the tireless endeavour.