diff mbox series

[13/20] lpfc: Use PBDE feature enabled bit to determine PBDE support

Message ID 20210707184351.67872-14-jsmart2021@gmail.com
State New
Headers show
Series lpfc: Update lpfc to revision 12.8.0.11 | expand

Commit Message

James Smart July 7, 2021, 6:43 p.m. UTC 
The SLI4 interface changed in the manner to indicate PBDE support.
Rework the driver to check for PBDE support via the PBDE feature bit
in COMMON_GET_SLI4_PARAMETERS.

Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_hw4.h  | 11 +++++++----
 drivers/scsi/lpfc/lpfc_init.c |  7 ++++---
 2 files changed, 11 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 7d4d179fb534..4d9233de9ead 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -3334,17 +3334,20 @@  struct lpfc_sli4_parameters {
 #define cfg_nosr_SHIFT				9
 #define cfg_nosr_MASK				0x00000001
 #define cfg_nosr_WORD				word19
-
 #define cfg_bv1s_SHIFT                          10
 #define cfg_bv1s_MASK                           0x00000001
 #define cfg_bv1s_WORD                           word19
-#define cfg_pvl_SHIFT				13
-#define cfg_pvl_MASK				0x00000001
-#define cfg_pvl_WORD				word19
 
 #define cfg_nsler_SHIFT                         12
 #define cfg_nsler_MASK                          0x00000001
 #define cfg_nsler_WORD                          word19
+#define cfg_pvl_SHIFT				13
+#define cfg_pvl_MASK				0x00000001
+#define cfg_pvl_WORD				word19
+
+#define cfg_pbde_SHIFT				20
+#define cfg_pbde_MASK				0x00000001
+#define cfg_pbde_WORD				word19
 
 	uint32_t word20;
 #define cfg_max_tow_xri_SHIFT			0
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index bd3742035e76..b06b2f847df2 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12268,9 +12268,10 @@  lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
 		phba->cfg_sg_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
 
-	/* Only embed PBDE for if_type 6, PBDE support requires xib be set */
-	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
-	    LPFC_SLI_INTF_IF_TYPE_6) || (!bf_get(cfg_xib, mbx_sli4_parameters)))
+	/* Enable embedded Payload BDE if support is indicated */
+	if (bf_get(cfg_pbde, mbx_sli4_parameters))
+		phba->cfg_enable_pbde = 1;
+	else
 		phba->cfg_enable_pbde = 0;
 
 	/*