@@ -10,6 +10,7 @@
#include <linux/clk-provider.h>
#include <linux/reset-controller.h>
#include <linux/of.h>
+#include <linux/pm_runtime.h>
#include "common.h"
#include "clk-rcg.h"
@@ -224,6 +225,11 @@ static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
}
+static void qcom_cc_pm_runtime_disable(void *data)
+{
+ pm_runtime_disable(data);
+}
+
int qcom_cc_really_probe(struct platform_device *pdev,
const struct qcom_cc_desc *desc, struct regmap *regmap)
{
@@ -241,6 +247,18 @@ int qcom_cc_really_probe(struct platform_device *pdev,
if (!cc)
return -ENOMEM;
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, qcom_cc_pm_runtime_disable, dev);
+ if (ret)
+ goto err;
+
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops;
@@ -251,7 +269,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
ret = devm_reset_controller_register(dev, &reset->rcdev);
if (ret)
- return ret;
+ goto err;
if (desc->gdscs && desc->num_gdscs) {
scd = devm_kzalloc(dev, sizeof(*scd), GFP_KERNEL);
@@ -262,11 +280,11 @@ int qcom_cc_really_probe(struct platform_device *pdev,
scd->num = desc->num_gdscs;
ret = gdsc_register(scd, &reset->rcdev, regmap);
if (ret)
- return ret;
+ goto err;
ret = devm_add_action_or_reset(dev, qcom_cc_gdsc_unregister,
scd);
if (ret)
- return ret;
+ goto err;
}
cc->rclks = rclks;
@@ -277,7 +295,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
for (i = 0; i < num_clk_hws; i++) {
ret = devm_clk_hw_register(dev, clk_hws[i]);
if (ret)
- return ret;
+ goto err;
}
for (i = 0; i < num_clks; i++) {
@@ -286,14 +304,21 @@ int qcom_cc_really_probe(struct platform_device *pdev,
ret = devm_clk_register_regmap(dev, rclks[i]);
if (ret)
- return ret;
+ goto err;
}
ret = devm_of_clk_add_hw_provider(dev, qcom_cc_clk_hw_get, cc);
if (ret)
- return ret;
+ goto err;
+
+ pm_runtime_put(dev);
return 0;
+
+err:
+ pm_runtime_put(dev);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
@@ -427,6 +427,7 @@ int gdsc_register(struct gdsc_desc *desc,
continue;
scs[i]->regmap = regmap;
scs[i]->rcdev = rcdev;
+ scs[i]->pd.dev.parent = desc->dev;
ret = gdsc_init(scs[i]);
if (ret)
return ret;
@@ -439,6 +440,8 @@ int gdsc_register(struct gdsc_desc *desc,
continue;
if (scs[i]->parent)
pm_genpd_add_subdomain(scs[i]->parent, &scs[i]->pd);
+ else if (!IS_ERR_OR_NULL(dev->pm_domain))
+ pm_genpd_add_subdomain(pd_to_genpd(dev->pm_domain), &scs[i]->pd);
}
return of_genpd_add_provider_onecell(dev->of_node, data);
@@ -457,6 +460,8 @@ void gdsc_unregister(struct gdsc_desc *desc)
continue;
if (scs[i]->parent)
pm_genpd_remove_subdomain(scs[i]->parent, &scs[i]->pd);
+ else if (!IS_ERR_OR_NULL(dev->pm_domain))
+ pm_genpd_remove_subdomain(pd_to_genpd(dev->pm_domain), &scs[i]->pd);
}
of_genpd_del_provider(dev->of_node);
}
On sm8250 dispcc and videocc registers are powered up by the MMCX power domain. Currently we used a regulator to enable this domain on demand, however this has some consequences, as genpd code is not reentrant. Teach Qualcomm clock controller code about setting up power domains and using them for gdsc control. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/clk/qcom/common.c | 37 +++++++++++++++++++++++++++++++------ drivers/clk/qcom/gdsc.c | 5 +++++ 2 files changed, 36 insertions(+), 6 deletions(-) -- 2.30.2