| Message ID | 20210708094904.3613365-1-gatis@mikrotik.com |
|---|---|
| State | New |
| Headers | show |
| Series | [net] atl1c: fix Mikrotik 10/25G NIC detection | expand |
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index 7dff20350865..f19370c33444 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c @@ -594,6 +594,11 @@ int atl1c_phy_init(struct atl1c_hw *hw) int ret_val; u16 mii_bmcr_data = BMCR_RESET; + if (hw->nic_type == athr_mt) { + hw->phy_configured = true; + return 0; + } + if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) || (atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) { dev_err(&pdev->dev, "Error get phy ID\n");
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable, on rare occasions it can happen that some physical functions of the NIC do not get initialized due to timeouted early MDIO op. This changes the atl1c probe on Mikrotik 10/25G NIC not to depend on MDIO op emulation. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> --- drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 5 +++++ 1 file changed, 5 insertions(+)