diff mbox series

[1/2] soc: qcom: smsm: Implement support for get_irqchip_state

Message ID 20210712135703.324748-1-stephan@gerhold.net
State Accepted
Commit c73a6852b42c8c80cc46590dbbcfa6c448fdbc63
Headers show
Series [1/2] soc: qcom: smsm: Implement support for get_irqchip_state | expand

Commit Message

Stephan Gerhold July 12, 2021, 1:57 p.m. UTC
At the moment there is no way for drivers to get the current state
of the interrupt signal reported by a remote processor. The irqchip
API has generic functionality for this, using irq_get_irqchip_state().

Implement support for getting the IRQCHIP_STATE_LINE_LEVEL by reading
the remote state and checking the bit for the specified IRQ.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/soc/qcom/smsm.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index 1d3d5e3ec2b0..a48f9db98836 100644
--- a/drivers/soc/qcom/smsm.c
+++ b/drivers/soc/qcom/smsm.c
@@ -299,11 +299,28 @@  static int smsm_set_irq_type(struct irq_data *irqd, unsigned int type)
 	return 0;
 }
 
+static int smsm_get_irqchip_state(struct irq_data *irqd,
+				  enum irqchip_irq_state which, bool *state)
+{
+	struct smsm_entry *entry = irq_data_get_irq_chip_data(irqd);
+	irq_hw_number_t irq = irqd_to_hwirq(irqd);
+	u32 val;
+
+	if (which != IRQCHIP_STATE_LINE_LEVEL)
+		return -EINVAL;
+
+	val = readl(entry->remote_state);
+	*state = !!(val & BIT(irq));
+
+	return 0;
+}
+
 static struct irq_chip smsm_irq_chip = {
 	.name           = "smsm",
 	.irq_mask       = smsm_mask_irq,
 	.irq_unmask     = smsm_unmask_irq,
 	.irq_set_type	= smsm_set_irq_type,
+	.irq_get_irqchip_state = smsm_get_irqchip_state,
 };
 
 /**