@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <linux/clk.h>
+#include <linux/pm_runtime.h>
#include <linux/coresight.h>
#include <linux/amba/bus.h>
@@ -51,13 +51,11 @@
* @base: memory mapped base address for this component.
* @dev: the device entity associated to this component.
* @csdev: component vitals needed by the framework.
- * @clk: the clock this component is associated to.
*/
struct tpiu_drvdata {
void __iomem *base;
struct device *dev;
struct coresight_device *csdev;
- struct clk *clk;
};
static void tpiu_enable_hw(struct tpiu_drvdata *drvdata)
@@ -72,12 +70,8 @@ static void tpiu_enable_hw(struct tpiu_drvdata *drvdata)
static int tpiu_enable(struct coresight_device *csdev)
{
struct tpiu_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
- int ret;
-
- ret = clk_prepare_enable(drvdata->clk);
- if (ret)
- return ret;
+ pm_runtime_get_sync(csdev->dev.parent);
tpiu_enable_hw(drvdata);
dev_info(drvdata->dev, "TPIU enabled\n");
@@ -101,8 +95,7 @@ static void tpiu_disable(struct coresight_device *csdev)
struct tpiu_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
tpiu_disable_hw(drvdata);
-
- clk_disable_unprepare(drvdata->clk);
+ pm_runtime_put(csdev->dev.parent);
dev_info(drvdata->dev, "TPIU disabled\n");
}
@@ -118,7 +111,6 @@ static const struct coresight_ops tpiu_cs_ops = {
static int tpiu_probe(struct amba_device *adev, const struct amba_id *id)
{
- int ret;
void __iomem *base;
struct device *dev = &adev->dev;
struct coresight_platform_data *pdata = NULL;
@@ -148,15 +140,10 @@ static int tpiu_probe(struct amba_device *adev, const struct amba_id *id)
drvdata->base = base;
- drvdata->clk = adev->pclk;
- ret = clk_prepare_enable(drvdata->clk);
- if (ret)
- return ret;
-
/* Disable tpiu to support older devices */
tpiu_disable_hw(drvdata);
- clk_disable_unprepare(drvdata->clk);
+ pm_runtime_put(&adev->dev);
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
if (!desc)
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will uprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as the clk_prepare_enable() and clk_disable_unprepare() was called and thus just increase and decreas the refcount by one, without it reaching zero and actually disabling the clock. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Rebased on the coresight git tree. - Added Ulf's review tag. --- drivers/hwtracing/coresight/coresight-tpiu.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)