| Message ID | 20210713193514.690894-1-robh@kernel.org |
|---|---|
| State | Accepted |
| Commit | f88321a3bf775649c685379a25fb9f3f79836bfd |
| Headers | show |
| Series | dt-bindings: Move fixed string 'patternProperties' to 'properties' | expand |
On Tue, Jul 13, 2021 at 01:35:14PM -0600, Rob Herring wrote: > There's no need for fixed strings to be under 'patternProperties', so move > them under 'properties' instead. > > Cc: Jean Delvare <jdelvare@suse.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Kishon Vijay Abraham I <kishon@ti.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Saravanan Sekar <sravanhome@gmail.com> > Cc: Mark Brown <broonie@kernel.org> > Cc: Jagan Teki <jagan@amarulasolutions.com> > Cc: Troy Kisky <troy.kisky@boundarydevices.com> > Cc: linux-hwmon@vger.kernel.org > Cc: linux-phy@lists.infradead.org > Cc: linux-spi@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/hwmon/adt7475.yaml | 22 ++++---- Acked-by: Guenter Roeck <linux@roeck-us.net> > .../bindings/phy/ti,phy-j721e-wiz.yaml | 56 +++++++++---------- > .../bindings/regulator/mps,mpq7920.yaml | 6 +- > .../regulator/nxp,pf8x00-regulator.yaml | 3 +- > .../bindings/spi/spi-controller.yaml | 32 +++++------ > 5 files changed, 60 insertions(+), 59 deletions(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > index ad0ec9f35bd8..7d9c083632b9 100644 > --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml > @@ -39,17 +39,7 @@ properties: > reg: > maxItems: 1 > > -patternProperties: > - "^adi,bypass-attenuator-in[0-4]$": > - description: | > - Configures bypassing the individual voltage input attenuator. If > - set to 1 the attenuator is bypassed if set to 0 the attenuator is > - not bypassed. If the property is absent then the attenuator > - retains it's configuration from the bios/bootloader. > - $ref: /schemas/types.yaml#/definitions/uint32 > - enum: [0, 1] > - > - "^adi,pwm-active-state$": > + adi,pwm-active-state: > description: | > Integer array, represents the active state of the pwm outputs If set to 0 > the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm > @@ -61,6 +51,16 @@ patternProperties: > enum: [0, 1] > default: 1 > > +patternProperties: > + "^adi,bypass-attenuator-in[0-4]$": > + description: | > + Configures bypassing the individual voltage input attenuator. If > + set to 1 the attenuator is bypassed if set to 0 the attenuator is > + not bypassed. If the property is absent then the attenuator > + retains it's configuration from the bios/bootloader. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1] > + > required: > - compatible > - reg > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > index 5272b6f284ba..dcd63908aeae 100644 > --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > @@ -77,6 +77,34 @@ properties: > Type-C spec states minimum CC pin debounce of 100 ms and maximum > of 200 ms. However, some solutions might need more than 200 ms. > > + refclk-dig: > + type: object > + description: | > + WIZ node should have subnode for refclk_dig to select the reference > + clock source for the reference clock used in the PHY and PMA digital > + logic. > + properties: > + clocks: > + minItems: 2 > + maxItems: 4 > + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing > + the inputs to refclk_dig > + > + "#clock-cells": > + const: 0 > + > + assigned-clocks: > + maxItems: 1 > + > + assigned-clock-parents: > + maxItems: 1 > + > + required: > + - clocks > + - "#clock-cells" > + - assigned-clocks > + - assigned-clock-parents > + > patternProperties: > "^pll[0|1]-refclk$": > type: object > @@ -121,34 +149,6 @@ patternProperties: > - clocks > - "#clock-cells" > > - "^refclk-dig$": > - type: object > - description: | > - WIZ node should have subnode for refclk_dig to select the reference > - clock source for the reference clock used in the PHY and PMA digital > - logic. > - properties: > - clocks: > - minItems: 2 > - maxItems: 4 > - description: Phandle to two (Torrent) or four (Sierra) clock nodes representing > - the inputs to refclk_dig > - > - "#clock-cells": > - const: 0 > - > - assigned-clocks: > - maxItems: 1 > - > - assigned-clock-parents: > - maxItems: 1 > - > - required: > - - clocks > - - "#clock-cells" > - - assigned-clocks > - - assigned-clock-parents > - > "^serdes@[0-9a-f]+$": > type: object > description: | > diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > index 12b8963615c3..c2e8c54e5311 100644 > --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml > @@ -36,12 +36,12 @@ properties: > switching frequency must be one of following corresponding value > 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz > > - patternProperties: > - "^ldo[1-4]$": > + ldortc: > type: object > $ref: regulator.yaml# > > - "^ldortc$": > + patternProperties: > + "^ldo[1-4]$": > type: object > $ref: regulator.yaml# > > diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml > index 8761437ed8ad..aabf50f5b39e 100644 > --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml > @@ -83,7 +83,8 @@ properties: > > unevaluatedProperties: false > > - "^vsnvs$": > + properties: > + vsnvs: > type: object > $ref: regulator.yaml# > description: > diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml > index faef4f6f55b8..8246891602e7 100644 > --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml > @@ -79,22 +79,7 @@ properties: > description: > The SPI controller acts as a slave, instead of a master. > > -allOf: > - - if: > - not: > - required: > - - spi-slave > - then: > - properties: > - "#address-cells": > - const: 1 > - else: > - properties: > - "#address-cells": > - const: 0 > - > -patternProperties: > - "^slave$": > + slave: > type: object > > properties: > @@ -105,6 +90,7 @@ patternProperties: > required: > - compatible > > +patternProperties: > "^.*@[0-9a-f]+$": > type: object > > @@ -180,6 +166,20 @@ patternProperties: > - compatible > - reg > > +allOf: > + - if: > + not: > + required: > + - spi-slave > + then: > + properties: > + "#address-cells": > + const: 1 > + else: > + properties: > + "#address-cells": > + const: 0 > + > additionalProperties: true > > examples: > -- > 2.27.0 >
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index ad0ec9f35bd8..7d9c083632b9 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -39,17 +39,7 @@ properties: reg: maxItems: 1 -patternProperties: - "^adi,bypass-attenuator-in[0-4]$": - description: | - Configures bypassing the individual voltage input attenuator. If - set to 1 the attenuator is bypassed if set to 0 the attenuator is - not bypassed. If the property is absent then the attenuator - retains it's configuration from the bios/bootloader. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] - - "^adi,pwm-active-state$": + adi,pwm-active-state: description: | Integer array, represents the active state of the pwm outputs If set to 0 the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm @@ -61,6 +51,16 @@ patternProperties: enum: [0, 1] default: 1 +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains it's configuration from the bios/bootloader. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 5272b6f284ba..dcd63908aeae 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -77,6 +77,34 @@ properties: Type-C spec states minimum CC pin debounce of 100 ms and maximum of 200 ms. However, some solutions might need more than 200 ms. + refclk-dig: + type: object + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + properties: + clocks: + minItems: 2 + maxItems: 4 + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing + the inputs to refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + patternProperties: "^pll[0|1]-refclk$": type: object @@ -121,34 +149,6 @@ patternProperties: - clocks - "#clock-cells" - "^refclk-dig$": - type: object - description: | - WIZ node should have subnode for refclk_dig to select the reference - clock source for the reference clock used in the PHY and PMA digital - logic. - properties: - clocks: - minItems: 2 - maxItems: 4 - description: Phandle to two (Torrent) or four (Sierra) clock nodes representing - the inputs to refclk_dig - - "#clock-cells": - const: 0 - - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - - required: - - clocks - - "#clock-cells" - - assigned-clocks - - assigned-clock-parents - "^serdes@[0-9a-f]+$": type: object description: | diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index 12b8963615c3..c2e8c54e5311 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -36,12 +36,12 @@ properties: switching frequency must be one of following corresponding value 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz - patternProperties: - "^ldo[1-4]$": + ldortc: type: object $ref: regulator.yaml# - "^ldortc$": + patternProperties: + "^ldo[1-4]$": type: object $ref: regulator.yaml# diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index 8761437ed8ad..aabf50f5b39e 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -83,7 +83,8 @@ properties: unevaluatedProperties: false - "^vsnvs$": + properties: + vsnvs: type: object $ref: regulator.yaml# description: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index faef4f6f55b8..8246891602e7 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -79,22 +79,7 @@ properties: description: The SPI controller acts as a slave, instead of a master. -allOf: - - if: - not: - required: - - spi-slave - then: - properties: - "#address-cells": - const: 1 - else: - properties: - "#address-cells": - const: 0 - -patternProperties: - "^slave$": + slave: type: object properties: @@ -105,6 +90,7 @@ patternProperties: required: - compatible +patternProperties: "^.*@[0-9a-f]+$": type: object @@ -180,6 +166,20 @@ patternProperties: - compatible - reg +allOf: + - if: + not: + required: + - spi-slave + then: + properties: + "#address-cells": + const: 1 + else: + properties: + "#address-cells": + const: 0 + additionalProperties: true examples:
There's no need for fixed strings to be under 'patternProperties', so move them under 'properties' instead. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Saravanan Sekar <sravanhome@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: linux-hwmon@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/hwmon/adt7475.yaml | 22 ++++---- .../bindings/phy/ti,phy-j721e-wiz.yaml | 56 +++++++++---------- .../bindings/regulator/mps,mpq7920.yaml | 6 +- .../regulator/nxp,pf8x00-regulator.yaml | 3 +- .../bindings/spi/spi-controller.yaml | 32 +++++------ 5 files changed, 60 insertions(+), 59 deletions(-) -- 2.27.0