diff mbox series

[v2] Bluetooth: btintel: Support Digital(N) + RF(N-1) combination

Message ID 20210713032755.19351-1-kiran.k@intel.com
State New
Headers show
Series [v2] Bluetooth: btintel: Support Digital(N) + RF(N-1) combination | expand

Commit Message

Kiran K July 13, 2021, 3:27 a.m. UTC
New generation Intel controllers(N) need to support RF from (N-1)
generation. Since PID comes from OTP present in RF module,
*setup* function gets mapped to BTUSB_INTEL_NEW instead of
BTUSB_INTEL_NEWGEN. This patch converges INTEL_NEW and INTEL_NEWGEN
mappings and defines a new generic *setup* function. All the
required information to load the correct driver is read from controller
in generic *setup* and branchs out appropriately.

Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
---
changes in v2:
 * For compatibility b/w CNVi and CNVr, instead of overriding the callbacks
   find out the required information at run time and branch out appropriately
 * review comments

 drivers/bluetooth/btintel.c | 149 ++++++++++++++++++++++++++++++------
 drivers/bluetooth/btintel.h |  10 +++
 drivers/bluetooth/btusb.c   | 149 +++++++++++++++++++-----------------
 3 files changed, 215 insertions(+), 93 deletions(-)

Comments

bluez.test.bot@gmail.com July 13, 2021, 4:08 a.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=514435

---Test result---

Test Summary:
CheckPatch                    PASS      1.01 seconds
GitLint                       PASS      0.11 seconds
BuildKernel                   PASS      583.81 seconds
TestRunner: Setup             PASS      390.07 seconds
TestRunner: l2cap-tester      PASS      2.87 seconds
TestRunner: bnep-tester       PASS      2.06 seconds
TestRunner: mgmt-tester       PASS      32.40 seconds
TestRunner: rfcomm-tester     PASS      2.30 seconds
TestRunner: sco-tester        PASS      2.25 seconds
TestRunner: smp-tester        FAIL      2.22 seconds
TestRunner: userchan-tester   PASS      2.28 seconds

Details
##############################
Test: CheckPatch - PASS - 1.01 seconds
Run checkpatch.pl script with rule in .checkpatch.conf


##############################
Test: GitLint - PASS - 0.11 seconds
Run gitlint with rule in .gitlint


##############################
Test: BuildKernel - PASS - 583.81 seconds
Build Kernel with minimal configuration supports Bluetooth


##############################
Test: TestRunner: Setup - PASS - 390.07 seconds
Setup environment for running Test Runner


##############################
Test: TestRunner: l2cap-tester - PASS - 2.87 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: bnep-tester - PASS - 2.06 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: mgmt-tester - PASS - 32.40 seconds
Run test-runner with mgmt-tester
Total: 446, Passed: 443 (99.3%), Failed: 0, Not Run: 3

##############################
Test: TestRunner: rfcomm-tester - PASS - 2.30 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: sco-tester - PASS - 2.25 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: smp-tester - FAIL - 2.22 seconds
Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0

Failed Test Cases
SMP Client - SC Request 2                            Failed       0.029 seconds

##############################
Test: TestRunner: userchan-tester - PASS - 2.28 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth
You-Sheng Yang July 13, 2021, 10:10 a.m. UTC | #2
Hi,

This works for me with Intel 9462 installed on an ADL platform.

Tested-by: You-Sheng Yang <vicamo.yang@canonical.com>

On 7/13/21 11:27 AM, Kiran K wrote:
> New generation Intel controllers(N) need to support RF from (N-1)
> generation. Since PID comes from OTP present in RF module,
> *setup* function gets mapped to BTUSB_INTEL_NEW instead of
> BTUSB_INTEL_NEWGEN. This patch converges INTEL_NEW and INTEL_NEWGEN
> mappings and defines a new generic *setup* function. All the
> required information to load the correct driver is read from controller
> in generic *setup* and branchs out appropriately.
> 
> Signed-off-by: Kiran K <kiran.k@intel.com>
> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>
> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>
> ---
> changes in v2:
>  * For compatibility b/w CNVi and CNVr, instead of overriding the callbacks
>    find out the required information at run time and branch out appropriately
>  * review comments
> 
>  drivers/bluetooth/btintel.c | 149 ++++++++++++++++++++++++++++++------
>  drivers/bluetooth/btintel.h |  10 +++
>  drivers/bluetooth/btusb.c   | 149 +++++++++++++++++++-----------------
>  3 files changed, 215 insertions(+), 93 deletions(-)
> 
> diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
> index e44b6993cf91..b1a4e02c0680 100644
> --- a/drivers/bluetooth/btintel.c
> +++ b/drivers/bluetooth/btintel.c
> @@ -58,8 +58,10 @@ int btintel_check_bdaddr(struct hci_dev *hdev)
>  	 * address 00:03:19:9E:8B:00 can be found. These controllers are
>  	 * fully operational, but have the danger of duplicate addresses
>  	 * and that in turn can cause problems with Bluetooth operation.
> +	 * Also mark controllers having zero bdaddress
>  	 */
> -	if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
> +	if (!bacmp(&bda->bdaddr, BDADDR_INTEL) ||
> +	    !bacmp(&bda->bdaddr, BDADDR_ANY)) {
>  		bt_dev_err(hdev, "Found Intel default device address (%pMR)",
>  			   &bda->bdaddr);
>  		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
> @@ -483,30 +485,15 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
>  }
>  EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
>  
> -int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
> +static int btintel_parse_version_tlv(struct hci_dev *hdev, struct sk_buff *skb,
> +				     struct intel_version_tlv *version)
>  {
> -	struct sk_buff *skb;
> -	const u8 param[1] = { 0xFF };
> -
> -	if (!version)
> -		return -EINVAL;
> -
> -	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
> -	if (IS_ERR(skb)) {
> -		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
> -			   PTR_ERR(skb));
> -		return PTR_ERR(skb);
> -	}
> +	int err = 0;
>  
> -	if (skb->data[0]) {
> -		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
> -			   skb->data[0]);
> -		kfree_skb(skb);
> -		return -EIO;
> -	}
> +	memset(version, 0x00, sizeof(*version));
>  
>  	/* Consume Command Complete Status field */
> -	skb_pull(skb, 1);
> +	skb_pull(skb, sizeof(__u8));
>  
>  	/* Event parameters contatin multiple TLVs. Read each of them
>  	 * and only keep the required data. Also, it use existing legacy
> @@ -516,27 +503,62 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
>  	while (skb->len) {
>  		struct intel_tlv *tlv;
>  
> +		if (skb->len < sizeof(*tlv)) {
> +			err = -EILSEQ;
> +			break;
> +		}
> +
>  		tlv = (struct intel_tlv *)skb->data;
> +
> +		if (skb->len < (sizeof(*tlv) + tlv->len)) {
> +			err = -EILSEQ;
> +			break;
> +		}
> +
>  		switch (tlv->type) {
>  		case INTEL_TLV_CNVI_TOP:
> +			if (tlv->len != sizeof(__le32)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			version->cnvi_top = get_unaligned_le32(tlv->val);
>  			break;
>  		case INTEL_TLV_CNVR_TOP:
> +			if (tlv->len != sizeof(__le32)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			version->cnvr_top = get_unaligned_le32(tlv->val);
>  			break;
>  		case INTEL_TLV_CNVI_BT:
> +			if (tlv->len != sizeof(__le32)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			version->cnvi_bt = get_unaligned_le32(tlv->val);
>  			break;
>  		case INTEL_TLV_CNVR_BT:
> +			if (tlv->len != sizeof(__le32)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			version->cnvr_bt = get_unaligned_le32(tlv->val);
>  			break;
>  		case INTEL_TLV_DEV_REV_ID:
> +			if (tlv->len != sizeof(__le16)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			version->dev_rev_id = get_unaligned_le16(tlv->val);
>  			break;
>  		case INTEL_TLV_IMAGE_TYPE:
>  			version->img_type = tlv->val[0];
>  			break;
>  		case INTEL_TLV_TIME_STAMP:
> +			if (tlv->len != sizeof(__le16)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			/* If image type is Operational firmware (0x03), then
>  			 * running FW Calendar Week and Year information can
>  			 * be extracted from Timestamp information
> @@ -549,6 +571,10 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
>  			version->build_type = tlv->val[0];
>  			break;
>  		case INTEL_TLV_BUILD_NUM:
> +			if (tlv->len != sizeof(__le32)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			/* If image type is Operational firmware (0x03), then
>  			 * running FW build number can be extracted from the
>  			 * Build information
> @@ -569,6 +595,10 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
>  			version->debug_lock = tlv->val[0];
>  			break;
>  		case INTEL_TLV_MIN_FW:
> +			if (tlv->len != 3) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			version->min_fw_build_nn = tlv->val[0];
>  			version->min_fw_build_cw = tlv->val[1];
>  			version->min_fw_build_yy = tlv->val[2];
> @@ -580,21 +610,96 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
>  			version->sbe_type = tlv->val[0];
>  			break;
>  		case INTEL_TLV_OTP_BDADDR:
> +			if (tlv->len != sizeof(version->otp_bd_addr)) {
> +				err = -EILSEQ;
> +				break;
> +			}
>  			memcpy(&version->otp_bd_addr, tlv->val, tlv->len);
>  			break;
>  		default:
>  			/* Ignore rest of information */
>  			break;
>  		}
> +
> +		if (err)
> +			break;
> +
>  		/* consume the current tlv and move to next*/
>  		skb_pull(skb, tlv->len + sizeof(*tlv));
>  	}
> +	return err;
> +}
> +
> +int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
> +{
> +	int err;
> +	struct sk_buff *skb;
> +	const u8 param[1] = { 0xFF };
> +
> +	if (!version)
> +		return -EINVAL;
> +
> +	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
> +			   PTR_ERR(skb));
> +		return PTR_ERR(skb);
> +	}
> +
> +	if (skb->data[0]) {
> +		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
> +			   skb->data[0]);
> +		kfree_skb(skb);
> +		return -EIO;
> +	}
> +
> +	err = btintel_parse_version_tlv(hdev, skb, version);
>  
>  	kfree_skb(skb);
> -	return 0;
> +
> +	return err;
>  }
>  EXPORT_SYMBOL_GPL(btintel_read_version_tlv);
>  
> +int btintel_generic_read_version(struct hci_dev *hdev,
> +				 struct intel_version_tlv *ver_tlv,
> +				 struct intel_version *ver, bool *is_tlv)
> +{
> +	int err = 0;
> +	struct sk_buff *skb;
> +	const u8 param[1] = { 0xFF };
> +
> +	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
> +			   PTR_ERR(skb));
> +		return PTR_ERR(skb);
> +	}
> +
> +	if (skb->data[0]) {
> +		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
> +			   skb->data[0]);
> +		kfree_skb(skb);
> +		return -EIO;
> +	}
> +
> +	if (skb->len < sizeof(struct intel_version))
> +		return -EILSEQ;
> +
> +	if (skb->len == sizeof(struct intel_version) &&
> +	    skb->data[1] == 0x37) {
> +		*is_tlv = false;
> +		memcpy(ver, skb->data, sizeof(*ver));
> +	} else {
> +		*is_tlv = true;
> +		err = btintel_parse_version_tlv(hdev, skb, ver_tlv);
> +	}
> +
> +	kfree_skb(skb);
> +	return err;
> +}
> +EXPORT_SYMBOL_GPL(btintel_generic_read_version);
> +
>  /* ------- REGMAP IBT SUPPORT ------- */
>  
>  #define IBT_REG_MODE_8BIT  0x00
> diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
> index d184064a5e7c..366cb746f9c4 100644
> --- a/drivers/bluetooth/btintel.h
> +++ b/drivers/bluetooth/btintel.h
> @@ -175,6 +175,10 @@ int btintel_read_debug_features(struct hci_dev *hdev,
>  				struct intel_debug_features *features);
>  int btintel_set_debug_features(struct hci_dev *hdev,
>  			       const struct intel_debug_features *features);
> +int btintel_generic_read_version(struct hci_dev *hdev,
> +				 struct intel_version_tlv *ver_tlv,
> +				 struct intel_version *ver,
> +				 bool *is_tlv);
>  #else
>  
>  static inline int btintel_check_bdaddr(struct hci_dev *hdev)
> @@ -307,4 +311,10 @@ static inline int btintel_set_debug_features(struct hci_dev *hdev,
>  	return -EOPNOTSUPP;
>  }
>  
> +static int btintel_generic_read_version(struct hci_dev *hdev,
> +					struct intel_version_tlv *ver_tlv,
> +					struct intel_version *ver, bool *is_tlv)
> +{
> +	return -EOPNOTSUPP;
> +}
>  #endif
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index a9855a2dd561..6c5050bdcfcc 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -60,7 +60,6 @@ static struct usb_driver btusb_driver;
>  #define BTUSB_WIDEBAND_SPEECH	0x400000
>  #define BTUSB_VALID_LE_STATES   0x800000
>  #define BTUSB_QCA_WCN6855	0x1000000
> -#define BTUSB_INTEL_NEWGEN	0x2000000
>  
>  static const struct usb_device_id btusb_table[] = {
>  	/* Generic Bluetooth USB device */
> @@ -368,9 +367,9 @@ static const struct usb_device_id blacklist_table[] = {
>  						     BTUSB_WIDEBAND_SPEECH },
>  	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW |
>  						     BTUSB_WIDEBAND_SPEECH },
> -	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEWGEN |
> +	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEW |
>  						     BTUSB_WIDEBAND_SPEECH},
> -	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEWGEN |
> +	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEW |
>  						     BTUSB_WIDEBAND_SPEECH},
>  	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
>  	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
> @@ -2521,8 +2520,8 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
>  		return -EINVAL;
>  
>  	/* The firmware variant determines if the device is in bootloader
> -	 * mode or is running operational firmware. The value 0x03 identifies
> -	 * the bootloader and the value 0x23 identifies the operational
> +	 * mode or is running operational firmware. The value 0x23 identifies
> +	 * the bootloader and the value 0x03 identifies the operational
>  	 * firmware.
>  	 *
>  	 * When the operational firmware is already present, then only
> @@ -2536,14 +2535,14 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
>  	if (ver->img_type == 0x03) {
>  		clear_bit(BTUSB_BOOTLOADER, &data->flags);
>  		btintel_check_bdaddr(hdev);
> -	}
> -
> -	/* If the OTP has no valid Bluetooth device address, then there will
> -	 * also be no valid address for the operational firmware.
> -	 */
> -	if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
> -		bt_dev_info(hdev, "No device address configured");
> -		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
> +	} else {
> +		/* In Boot mode, bd address is part of tlv data. Check for
> +		 * valid bd address
> +		 */
> +		if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
> +			bt_dev_info(hdev, "No device address configured");
> +			set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
> +		}
>  	}
>  
>  	btusb_setup_intel_newgen_get_fw_name(ver, fwname, sizeof(fwname), "sfi");
> @@ -2842,10 +2841,9 @@ static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
>  	return err;
>  }
>  
> -static int btusb_setup_intel_new(struct hci_dev *hdev)
> +static int btusb_setup_intel_new(struct hci_dev *hdev, struct intel_version *ver)
>  {
>  	struct btusb_data *data = hci_get_drvdata(hdev);
> -	struct intel_version ver;
>  	struct intel_boot_params params;
>  	u32 boot_param;
>  	char ddcname[64];
> @@ -2860,27 +2858,16 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
>  	 */
>  	boot_param = 0x00000000;
>  
> -	/* Read the Intel version information to determine if the device
> -	 * is in bootloader mode or if it already has operational firmware
> -	 * loaded.
> -	 */
> -	err = btintel_read_version(hdev, &ver);
> -	if (err) {
> -		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
> -		btintel_reset_to_bootloader(hdev);
> -		return err;
> -	}
> -
> -	err = btintel_version_info(hdev, &ver);
> +	err = btintel_version_info(hdev, ver);
>  	if (err)
>  		return err;
>  
> -	err = btusb_intel_download_firmware(hdev, &ver, &params, &boot_param);
> +	err = btusb_intel_download_firmware(hdev, ver, &params, &boot_param);
>  	if (err)
>  		return err;
>  
>  	/* controller is already having an operational firmware */
> -	if (ver.fw_variant == 0x23)
> +	if (ver->fw_variant == 0x23)
>  		goto finish;
>  
>  	err = btusb_intel_boot(hdev, boot_param);
> @@ -2889,7 +2876,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
>  
>  	clear_bit(BTUSB_BOOTLOADER, &data->flags);
>  
> -	err = btusb_setup_intel_new_get_fw_name(&ver, &params, ddcname,
> +	err = btusb_setup_intel_new_get_fw_name(ver, &params, ddcname,
>  						sizeof(ddcname), "ddc");
>  
>  	if (err < 0) {
> @@ -2913,17 +2900,17 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
>  	btintel_set_debug_features(hdev, &features);
>  
>  	/* Read the Intel version information after loading the FW  */
> -	err = btintel_read_version(hdev, &ver);
> +	err = btintel_read_version(hdev, ver);
>  	if (err)
>  		return err;
>  
> -	btintel_version_info(hdev, &ver);
> +	btintel_version_info(hdev, ver);
>  
>  finish:
>  	/* All Intel controllers that support the Microsoft vendor
>  	 * extension are using 0xFC1E for VsMsftOpCode.
>  	 */
> -	switch (ver.hw_variant) {
> +	switch (ver->hw_variant) {
>  	case 0x11:	/* JfP */
>  	case 0x12:	/* ThP */
>  	case 0x13:	/* HrP */
> @@ -2944,14 +2931,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
>  	return 0;
>  }
>  
> -static int btusb_setup_intel_newgen(struct hci_dev *hdev)
> +static int btusb_setup_intel_newgen(struct hci_dev *hdev, struct intel_version_tlv *version)
>  {
>  	struct btusb_data *data = hci_get_drvdata(hdev);
>  	u32 boot_param;
>  	char ddcname[64];
>  	int err;
>  	struct intel_debug_features features;
> -	struct intel_version_tlv version;
>  
>  	bt_dev_dbg(hdev, "");
>  
> @@ -2961,27 +2947,16 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
>  	 */
>  	boot_param = 0x00000000;
>  
> -	/* Read the Intel version information to determine if the device
> -	 * is in bootloader mode or if it already has operational firmware
> -	 * loaded.
> -	 */
> -	err = btintel_read_version_tlv(hdev, &version);
> -	if (err) {
> -		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
> -		btintel_reset_to_bootloader(hdev);
> -		return err;
> -	}
> -
> -	err = btintel_version_info_tlv(hdev, &version);
> +	err = btintel_version_info_tlv(hdev, version);
>  	if (err)
>  		return err;
>  
> -	err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param);
> +	err = btusb_intel_download_firmware_newgen(hdev, version, &boot_param);
>  	if (err)
>  		return err;
>  
>  	/* check if controller is already having an operational firmware */
> -	if (version.img_type == 0x03)
> +	if (version->img_type == 0x03)
>  		goto finish;
>  
>  	err = btusb_intel_boot(hdev, boot_param);
> @@ -2990,7 +2965,7 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
>  
>  	clear_bit(BTUSB_BOOTLOADER, &data->flags);
>  
> -	btusb_setup_intel_newgen_get_fw_name(&version, ddcname, sizeof(ddcname),
> +	btusb_setup_intel_newgen_get_fw_name(version, ddcname, sizeof(ddcname),
>  					     "ddc");
>  	/* Once the device is running in operational mode, it needs to
>  	 * apply the device configuration (DDC) parameters.
> @@ -3009,11 +2984,11 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
>  	btintel_set_debug_features(hdev, &features);
>  
>  	/* Read the Intel version information after loading the FW  */
> -	err = btintel_read_version_tlv(hdev, &version);
> +	err = btintel_read_version_tlv(hdev, version);
>  	if (err)
>  		return err;
>  
> -	btintel_version_info_tlv(hdev, &version);
> +	btintel_version_info_tlv(hdev, version);
>  
>  finish:
>  	/* Set the event mask for Intel specific vendor events. This enables
> @@ -3027,6 +3002,56 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
>  
>  	return 0;
>  }
> +
> +static bool btintel_is_newgen_controller(struct hci_dev *hdev, u32 cnvi)
> +{
> +	bt_dev_dbg(hdev, "CNVi - %x", cnvi & 0xFFF);
> +
> +	switch (cnvi & 0xFFF) {
> +	case 0x400: /* Slr */
> +	case 0x401: /* Slr-F */
> +	case 0x410: /* TyP */
> +		return true;
> +	}
> +	return false;
> +}
> +
> +static int btusb_setup_intel_generic(struct hci_dev *hdev)
> +{
> +	struct intel_version_tlv ver_tlv;
> +	struct intel_version ver;
> +	bool is_tlv;
> +	int err;
> +
> +	err = btintel_generic_read_version(hdev, &ver_tlv, &ver, &is_tlv);
> +	if (err) {
> +		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
> +		btintel_reset_to_bootloader(hdev);
> +		goto done;
> +	}
> +
> +	if (!is_tlv) {
> +		err = btusb_setup_intel_new(hdev, &ver);
> +	} else {
> +		/* In OP mode Quasar/Pulsar ram products returns TLV data.
> +		 * Find out CNVi and then  branch out appropriately
> +		 */
> +		if (btintel_is_newgen_controller(hdev, ver_tlv.cnvi_top)) {
> +			err = btusb_setup_intel_newgen(hdev, &ver_tlv);
> +		} else {
> +			err = btintel_read_version(hdev, &ver);
> +			if (err) {
> +				bt_dev_err(hdev, "Intel Read version failed (%d)", err);
> +				goto done;
> +			}
> +			err = btusb_setup_intel_new(hdev, &ver);
> +		}
> +	}
> +done:
> +
> +	return err;
> +}
> +
>  static int btusb_shutdown_intel(struct hci_dev *hdev)
>  {
>  	struct sk_buff *skb;
> @@ -4649,21 +4674,7 @@ static int btusb_probe(struct usb_interface *intf,
>  	if (id->driver_info & BTUSB_INTEL_NEW) {
>  		hdev->manufacturer = 2;
>  		hdev->send = btusb_send_frame_intel;
> -		hdev->setup = btusb_setup_intel_new;
> -		hdev->shutdown = btusb_shutdown_intel_new;
> -		hdev->hw_error = btintel_hw_error;
> -		hdev->set_diag = btintel_set_diag;
> -		hdev->set_bdaddr = btintel_set_bdaddr;
> -		hdev->cmd_timeout = btusb_intel_cmd_timeout;
> -		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
> -		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
> -		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
> -	}
> -
> -	if (id->driver_info & BTUSB_INTEL_NEWGEN) {
> -		hdev->manufacturer = 2;
> -		hdev->send = btusb_send_frame_intel;
> -		hdev->setup = btusb_setup_intel_newgen;
> +		hdev->setup = btusb_setup_intel_generic;
>  		hdev->shutdown = btusb_shutdown_intel_new;
>  		hdev->hw_error = btintel_hw_error;
>  		hdev->set_diag = btintel_set_diag;
> @@ -4672,10 +4683,6 @@ static int btusb_probe(struct usb_interface *intf,
>  		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
>  		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>  		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
> -
> -		data->recv_event = btusb_recv_event_intel;
> -		data->recv_bulk = btusb_recv_bulk_intel;
> -		set_bit(BTUSB_BOOTLOADER, &data->flags);
>  	}
>  
>  	if (id->driver_info & BTUSB_MARVELL)
>
Kiran K July 23, 2021, 9:19 a.m. UTC | #3
Hi Marcel,

Friendly reminder to review this patch.

Thanks,
Kiran


> -----Original Message-----

> From: K, Kiran <kiran.k@intel.com>

> Sent: Tuesday, July 13, 2021 8:58 AM

> To: linux-bluetooth@vger.kernel.org

> Cc: K, Kiran <kiran.k@intel.com>

> Subject: [PATCH v2] Bluetooth: btintel: Support Digital(N) + RF(N-1)

> combination

> 

> New generation Intel controllers(N) need to support RF from (N-1)

> generation. Since PID comes from OTP present in RF module,

> *setup* function gets mapped to BTUSB_INTEL_NEW instead of

> BTUSB_INTEL_NEWGEN. This patch converges INTEL_NEW and

> INTEL_NEWGEN mappings and defines a new generic *setup* function. All

> the required information to load the correct driver is read from controller in

> generic *setup* and branchs out appropriately.

> 

> Signed-off-by: Kiran K <kiran.k@intel.com>

> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com>

> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com>

> ---

> changes in v2:

>  * For compatibility b/w CNVi and CNVr, instead of overriding the callbacks

>    find out the required information at run time and branch out appropriately

>  * review comments

> 

>  drivers/bluetooth/btintel.c | 149 ++++++++++++++++++++++++++++++------

>  drivers/bluetooth/btintel.h |  10 +++

>  drivers/bluetooth/btusb.c   | 149 +++++++++++++++++++-----------------

>  3 files changed, 215 insertions(+), 93 deletions(-)

> 

> diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c index

> e44b6993cf91..b1a4e02c0680 100644

> --- a/drivers/bluetooth/btintel.c

> +++ b/drivers/bluetooth/btintel.c

> @@ -58,8 +58,10 @@ int btintel_check_bdaddr(struct hci_dev *hdev)

>  	 * address 00:03:19:9E:8B:00 can be found. These controllers are

>  	 * fully operational, but have the danger of duplicate addresses

>  	 * and that in turn can cause problems with Bluetooth operation.

> +	 * Also mark controllers having zero bdaddress

>  	 */

> -	if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {

> +	if (!bacmp(&bda->bdaddr, BDADDR_INTEL) ||

> +	    !bacmp(&bda->bdaddr, BDADDR_ANY)) {

>  		bt_dev_err(hdev, "Found Intel default device address

> (%pMR)",

>  			   &bda->bdaddr);

>  		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); @@ -

> 483,30 +485,15 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct

> intel_version_tlv *ver  }  EXPORT_SYMBOL_GPL(btintel_version_info_tlv);

> 

> -int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv

> *version)

> +static int btintel_parse_version_tlv(struct hci_dev *hdev, struct sk_buff

> *skb,

> +				     struct intel_version_tlv *version)

>  {

> -	struct sk_buff *skb;

> -	const u8 param[1] = { 0xFF };

> -

> -	if (!version)

> -		return -EINVAL;

> -

> -	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);

> -	if (IS_ERR(skb)) {

> -		bt_dev_err(hdev, "Reading Intel version information failed

> (%ld)",

> -			   PTR_ERR(skb));

> -		return PTR_ERR(skb);

> -	}

> +	int err = 0;

> 

> -	if (skb->data[0]) {

> -		bt_dev_err(hdev, "Intel Read Version command failed

> (%02x)",

> -			   skb->data[0]);

> -		kfree_skb(skb);

> -		return -EIO;

> -	}

> +	memset(version, 0x00, sizeof(*version));

> 

>  	/* Consume Command Complete Status field */

> -	skb_pull(skb, 1);

> +	skb_pull(skb, sizeof(__u8));

> 

>  	/* Event parameters contatin multiple TLVs. Read each of them

>  	 * and only keep the required data. Also, it use existing legacy @@ -

> 516,27 +503,62 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct

> intel_version_tlv *ver

>  	while (skb->len) {

>  		struct intel_tlv *tlv;

> 

> +		if (skb->len < sizeof(*tlv)) {

> +			err = -EILSEQ;

> +			break;

> +		}

> +

>  		tlv = (struct intel_tlv *)skb->data;

> +

> +		if (skb->len < (sizeof(*tlv) + tlv->len)) {

> +			err = -EILSEQ;

> +			break;

> +		}

> +

>  		switch (tlv->type) {

>  		case INTEL_TLV_CNVI_TOP:

> +			if (tlv->len != sizeof(__le32)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			version->cnvi_top = get_unaligned_le32(tlv->val);

>  			break;

>  		case INTEL_TLV_CNVR_TOP:

> +			if (tlv->len != sizeof(__le32)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			version->cnvr_top = get_unaligned_le32(tlv->val);

>  			break;

>  		case INTEL_TLV_CNVI_BT:

> +			if (tlv->len != sizeof(__le32)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			version->cnvi_bt = get_unaligned_le32(tlv->val);

>  			break;

>  		case INTEL_TLV_CNVR_BT:

> +			if (tlv->len != sizeof(__le32)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			version->cnvr_bt = get_unaligned_le32(tlv->val);

>  			break;

>  		case INTEL_TLV_DEV_REV_ID:

> +			if (tlv->len != sizeof(__le16)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			version->dev_rev_id = get_unaligned_le16(tlv->val);

>  			break;

>  		case INTEL_TLV_IMAGE_TYPE:

>  			version->img_type = tlv->val[0];

>  			break;

>  		case INTEL_TLV_TIME_STAMP:

> +			if (tlv->len != sizeof(__le16)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			/* If image type is Operational firmware (0x03), then

>  			 * running FW Calendar Week and Year information

> can

>  			 * be extracted from Timestamp information @@ -

> 549,6 +571,10 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct

> intel_version_tlv *ver

>  			version->build_type = tlv->val[0];

>  			break;

>  		case INTEL_TLV_BUILD_NUM:

> +			if (tlv->len != sizeof(__le32)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			/* If image type is Operational firmware (0x03), then

>  			 * running FW build number can be extracted from

> the

>  			 * Build information

> @@ -569,6 +595,10 @@ int btintel_read_version_tlv(struct hci_dev *hdev,

> struct intel_version_tlv *ver

>  			version->debug_lock = tlv->val[0];

>  			break;

>  		case INTEL_TLV_MIN_FW:

> +			if (tlv->len != 3) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			version->min_fw_build_nn = tlv->val[0];

>  			version->min_fw_build_cw = tlv->val[1];

>  			version->min_fw_build_yy = tlv->val[2]; @@ -580,21

> +610,96 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct

> intel_version_tlv *ver

>  			version->sbe_type = tlv->val[0];

>  			break;

>  		case INTEL_TLV_OTP_BDADDR:

> +			if (tlv->len != sizeof(version->otp_bd_addr)) {

> +				err = -EILSEQ;

> +				break;

> +			}

>  			memcpy(&version->otp_bd_addr, tlv->val, tlv->len);

>  			break;

>  		default:

>  			/* Ignore rest of information */

>  			break;

>  		}

> +

> +		if (err)

> +			break;

> +

>  		/* consume the current tlv and move to next*/

>  		skb_pull(skb, tlv->len + sizeof(*tlv));

>  	}

> +	return err;

> +}

> +

> +int btintel_read_version_tlv(struct hci_dev *hdev, struct

> +intel_version_tlv *version) {

> +	int err;

> +	struct sk_buff *skb;

> +	const u8 param[1] = { 0xFF };

> +

> +	if (!version)

> +		return -EINVAL;

> +

> +	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);

> +	if (IS_ERR(skb)) {

> +		bt_dev_err(hdev, "Reading Intel version information failed

> (%ld)",

> +			   PTR_ERR(skb));

> +		return PTR_ERR(skb);

> +	}

> +

> +	if (skb->data[0]) {

> +		bt_dev_err(hdev, "Intel Read Version command failed

> (%02x)",

> +			   skb->data[0]);

> +		kfree_skb(skb);

> +		return -EIO;

> +	}

> +

> +	err = btintel_parse_version_tlv(hdev, skb, version);

> 

>  	kfree_skb(skb);

> -	return 0;

> +

> +	return err;

>  }

>  EXPORT_SYMBOL_GPL(btintel_read_version_tlv);

> 

> +int btintel_generic_read_version(struct hci_dev *hdev,

> +				 struct intel_version_tlv *ver_tlv,

> +				 struct intel_version *ver, bool *is_tlv) {

> +	int err = 0;

> +	struct sk_buff *skb;

> +	const u8 param[1] = { 0xFF };

> +

> +	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);

> +	if (IS_ERR(skb)) {

> +		bt_dev_err(hdev, "Reading Intel version information failed

> (%ld)",

> +			   PTR_ERR(skb));

> +		return PTR_ERR(skb);

> +	}

> +

> +	if (skb->data[0]) {

> +		bt_dev_err(hdev, "Intel Read Version command failed

> (%02x)",

> +			   skb->data[0]);

> +		kfree_skb(skb);

> +		return -EIO;

> +	}

> +

> +	if (skb->len < sizeof(struct intel_version))

> +		return -EILSEQ;

> +

> +	if (skb->len == sizeof(struct intel_version) &&

> +	    skb->data[1] == 0x37) {

> +		*is_tlv = false;

> +		memcpy(ver, skb->data, sizeof(*ver));

> +	} else {

> +		*is_tlv = true;

> +		err = btintel_parse_version_tlv(hdev, skb, ver_tlv);

> +	}

> +

> +	kfree_skb(skb);

> +	return err;

> +}

> +EXPORT_SYMBOL_GPL(btintel_generic_read_version);

> +

>  /* ------- REGMAP IBT SUPPORT ------- */

> 

>  #define IBT_REG_MODE_8BIT  0x00

> diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h index

> d184064a5e7c..366cb746f9c4 100644

> --- a/drivers/bluetooth/btintel.h

> +++ b/drivers/bluetooth/btintel.h

> @@ -175,6 +175,10 @@ int btintel_read_debug_features(struct hci_dev

> *hdev,

>  				struct intel_debug_features *features);  int

> btintel_set_debug_features(struct hci_dev *hdev,

>  			       const struct intel_debug_features *features);

> +int btintel_generic_read_version(struct hci_dev *hdev,

> +				 struct intel_version_tlv *ver_tlv,

> +				 struct intel_version *ver,

> +				 bool *is_tlv);

>  #else

> 

>  static inline int btintel_check_bdaddr(struct hci_dev *hdev) @@ -307,4

> +311,10 @@ static inline int btintel_set_debug_features(struct hci_dev

> *hdev,

>  	return -EOPNOTSUPP;

>  }

> 

> +static int btintel_generic_read_version(struct hci_dev *hdev,

> +					struct intel_version_tlv *ver_tlv,

> +					struct intel_version *ver, bool *is_tlv)

> {

> +	return -EOPNOTSUPP;

> +}

>  #endif

> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index

> a9855a2dd561..6c5050bdcfcc 100644

> --- a/drivers/bluetooth/btusb.c

> +++ b/drivers/bluetooth/btusb.c

> @@ -60,7 +60,6 @@ static struct usb_driver btusb_driver;

>  #define BTUSB_WIDEBAND_SPEECH	0x400000

>  #define BTUSB_VALID_LE_STATES   0x800000

>  #define BTUSB_QCA_WCN6855	0x1000000

> -#define BTUSB_INTEL_NEWGEN	0x2000000

> 

>  static const struct usb_device_id btusb_table[] = {

>  	/* Generic Bluetooth USB device */

> @@ -368,9 +367,9 @@ static const struct usb_device_id blacklist_table[] = {

> 

> BTUSB_WIDEBAND_SPEECH },

>  	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW |

> 

> BTUSB_WIDEBAND_SPEECH },

> -	{ USB_DEVICE(0x8087, 0x0032), .driver_info =

> BTUSB_INTEL_NEWGEN |

> +	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEW |

> 

> BTUSB_WIDEBAND_SPEECH},

> -	{ USB_DEVICE(0x8087, 0x0033), .driver_info =

> BTUSB_INTEL_NEWGEN |

> +	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEW |

> 

> BTUSB_WIDEBAND_SPEECH},

>  	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },

>  	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL }, @@ -

> 2521,8 +2520,8 @@ static int

> btusb_intel_download_firmware_newgen(struct hci_dev *hdev,

>  		return -EINVAL;

> 

>  	/* The firmware variant determines if the device is in bootloader

> -	 * mode or is running operational firmware. The value 0x03 identifies

> -	 * the bootloader and the value 0x23 identifies the operational

> +	 * mode or is running operational firmware. The value 0x23 identifies

> +	 * the bootloader and the value 0x03 identifies the operational

>  	 * firmware.

>  	 *

>  	 * When the operational firmware is already present, then only @@ -

> 2536,14 +2535,14 @@ static int

> btusb_intel_download_firmware_newgen(struct hci_dev *hdev,

>  	if (ver->img_type == 0x03) {

>  		clear_bit(BTUSB_BOOTLOADER, &data->flags);

>  		btintel_check_bdaddr(hdev);

> -	}

> -

> -	/* If the OTP has no valid Bluetooth device address, then there will

> -	 * also be no valid address for the operational firmware.

> -	 */

> -	if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {

> -		bt_dev_info(hdev, "No device address configured");

> -		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);

> +	} else {

> +		/* In Boot mode, bd address is part of tlv data. Check for

> +		 * valid bd address

> +		 */

> +		if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {

> +			bt_dev_info(hdev, "No device address configured");

> +			set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev-

> >quirks);

> +		}

>  	}

> 

>  	btusb_setup_intel_newgen_get_fw_name(ver, fwname,

> sizeof(fwname), "sfi"); @@ -2842,10 +2841,9 @@ static int

> btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)

>  	return err;

>  }

> 

> -static int btusb_setup_intel_new(struct hci_dev *hdev)

> +static int btusb_setup_intel_new(struct hci_dev *hdev, struct

> +intel_version *ver)

>  {

>  	struct btusb_data *data = hci_get_drvdata(hdev);

> -	struct intel_version ver;

>  	struct intel_boot_params params;

>  	u32 boot_param;

>  	char ddcname[64];

> @@ -2860,27 +2858,16 @@ static int btusb_setup_intel_new(struct hci_dev

> *hdev)

>  	 */

>  	boot_param = 0x00000000;

> 

> -	/* Read the Intel version information to determine if the device

> -	 * is in bootloader mode or if it already has operational firmware

> -	 * loaded.

> -	 */

> -	err = btintel_read_version(hdev, &ver);

> -	if (err) {

> -		bt_dev_err(hdev, "Intel Read version failed (%d)", err);

> -		btintel_reset_to_bootloader(hdev);

> -		return err;

> -	}

> -

> -	err = btintel_version_info(hdev, &ver);

> +	err = btintel_version_info(hdev, ver);

>  	if (err)

>  		return err;

> 

> -	err = btusb_intel_download_firmware(hdev, &ver, &params,

> &boot_param);

> +	err = btusb_intel_download_firmware(hdev, ver, &params,

> &boot_param);

>  	if (err)

>  		return err;

> 

>  	/* controller is already having an operational firmware */

> -	if (ver.fw_variant == 0x23)

> +	if (ver->fw_variant == 0x23)

>  		goto finish;

> 

>  	err = btusb_intel_boot(hdev, boot_param); @@ -2889,7 +2876,7

> @@ static int btusb_setup_intel_new(struct hci_dev *hdev)

> 

>  	clear_bit(BTUSB_BOOTLOADER, &data->flags);

> 

> -	err = btusb_setup_intel_new_get_fw_name(&ver, &params,

> ddcname,

> +	err = btusb_setup_intel_new_get_fw_name(ver, &params, ddcname,

>  						sizeof(ddcname), "ddc");

> 

>  	if (err < 0) {

> @@ -2913,17 +2900,17 @@ static int btusb_setup_intel_new(struct hci_dev

> *hdev)

>  	btintel_set_debug_features(hdev, &features);

> 

>  	/* Read the Intel version information after loading the FW  */

> -	err = btintel_read_version(hdev, &ver);

> +	err = btintel_read_version(hdev, ver);

>  	if (err)

>  		return err;

> 

> -	btintel_version_info(hdev, &ver);

> +	btintel_version_info(hdev, ver);

> 

>  finish:

>  	/* All Intel controllers that support the Microsoft vendor

>  	 * extension are using 0xFC1E for VsMsftOpCode.

>  	 */

> -	switch (ver.hw_variant) {

> +	switch (ver->hw_variant) {

>  	case 0x11:	/* JfP */

>  	case 0x12:	/* ThP */

>  	case 0x13:	/* HrP */

> @@ -2944,14 +2931,13 @@ static int btusb_setup_intel_new(struct hci_dev

> *hdev)

>  	return 0;

>  }

> 

> -static int btusb_setup_intel_newgen(struct hci_dev *hdev)

> +static int btusb_setup_intel_newgen(struct hci_dev *hdev, struct

> +intel_version_tlv *version)

>  {

>  	struct btusb_data *data = hci_get_drvdata(hdev);

>  	u32 boot_param;

>  	char ddcname[64];

>  	int err;

>  	struct intel_debug_features features;

> -	struct intel_version_tlv version;

> 

>  	bt_dev_dbg(hdev, "");

> 

> @@ -2961,27 +2947,16 @@ static int btusb_setup_intel_newgen(struct

> hci_dev *hdev)

>  	 */

>  	boot_param = 0x00000000;

> 

> -	/* Read the Intel version information to determine if the device

> -	 * is in bootloader mode or if it already has operational firmware

> -	 * loaded.

> -	 */

> -	err = btintel_read_version_tlv(hdev, &version);

> -	if (err) {

> -		bt_dev_err(hdev, "Intel Read version failed (%d)", err);

> -		btintel_reset_to_bootloader(hdev);

> -		return err;

> -	}

> -

> -	err = btintel_version_info_tlv(hdev, &version);

> +	err = btintel_version_info_tlv(hdev, version);

>  	if (err)

>  		return err;

> 

> -	err = btusb_intel_download_firmware_newgen(hdev, &version,

> &boot_param);

> +	err = btusb_intel_download_firmware_newgen(hdev, version,

> +&boot_param);

>  	if (err)

>  		return err;

> 

>  	/* check if controller is already having an operational firmware */

> -	if (version.img_type == 0x03)

> +	if (version->img_type == 0x03)

>  		goto finish;

> 

>  	err = btusb_intel_boot(hdev, boot_param); @@ -2990,7 +2965,7

> @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)

> 

>  	clear_bit(BTUSB_BOOTLOADER, &data->flags);

> 

> -	btusb_setup_intel_newgen_get_fw_name(&version, ddcname,

> sizeof(ddcname),

> +	btusb_setup_intel_newgen_get_fw_name(version, ddcname,

> +sizeof(ddcname),

>  					     "ddc");

>  	/* Once the device is running in operational mode, it needs to

>  	 * apply the device configuration (DDC) parameters.

> @@ -3009,11 +2984,11 @@ static int btusb_setup_intel_newgen(struct

> hci_dev *hdev)

>  	btintel_set_debug_features(hdev, &features);

> 

>  	/* Read the Intel version information after loading the FW  */

> -	err = btintel_read_version_tlv(hdev, &version);

> +	err = btintel_read_version_tlv(hdev, version);

>  	if (err)

>  		return err;

> 

> -	btintel_version_info_tlv(hdev, &version);

> +	btintel_version_info_tlv(hdev, version);

> 

>  finish:

>  	/* Set the event mask for Intel specific vendor events. This enables

> @@ -3027,6 +3002,56 @@ static int btusb_setup_intel_newgen(struct

> hci_dev *hdev)

> 

>  	return 0;

>  }

> +

> +static bool btintel_is_newgen_controller(struct hci_dev *hdev, u32

> +cnvi) {

> +	bt_dev_dbg(hdev, "CNVi - %x", cnvi & 0xFFF);

> +

> +	switch (cnvi & 0xFFF) {

> +	case 0x400: /* Slr */

> +	case 0x401: /* Slr-F */

> +	case 0x410: /* TyP */

> +		return true;

> +	}

> +	return false;

> +}

> +

> +static int btusb_setup_intel_generic(struct hci_dev *hdev) {

> +	struct intel_version_tlv ver_tlv;

> +	struct intel_version ver;

> +	bool is_tlv;

> +	int err;

> +

> +	err = btintel_generic_read_version(hdev, &ver_tlv, &ver, &is_tlv);

> +	if (err) {

> +		bt_dev_err(hdev, "Intel Read version failed (%d)", err);

> +		btintel_reset_to_bootloader(hdev);

> +		goto done;

> +	}

> +

> +	if (!is_tlv) {

> +		err = btusb_setup_intel_new(hdev, &ver);

> +	} else {

> +		/* In OP mode Quasar/Pulsar ram products returns TLV data.

> +		 * Find out CNVi and then  branch out appropriately

> +		 */

> +		if (btintel_is_newgen_controller(hdev, ver_tlv.cnvi_top)) {

> +			err = btusb_setup_intel_newgen(hdev, &ver_tlv);

> +		} else {

> +			err = btintel_read_version(hdev, &ver);

> +			if (err) {

> +				bt_dev_err(hdev, "Intel Read version failed

> (%d)", err);

> +				goto done;

> +			}

> +			err = btusb_setup_intel_new(hdev, &ver);

> +		}

> +	}

> +done:

> +

> +	return err;

> +}

> +

>  static int btusb_shutdown_intel(struct hci_dev *hdev)  {

>  	struct sk_buff *skb;

> @@ -4649,21 +4674,7 @@ static int btusb_probe(struct usb_interface *intf,

>  	if (id->driver_info & BTUSB_INTEL_NEW) {

>  		hdev->manufacturer = 2;

>  		hdev->send = btusb_send_frame_intel;

> -		hdev->setup = btusb_setup_intel_new;

> -		hdev->shutdown = btusb_shutdown_intel_new;

> -		hdev->hw_error = btintel_hw_error;

> -		hdev->set_diag = btintel_set_diag;

> -		hdev->set_bdaddr = btintel_set_bdaddr;

> -		hdev->cmd_timeout = btusb_intel_cmd_timeout;

> -		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev-

> >quirks);

> -		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev-

> >quirks);

> -		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);

> -	}

> -

> -	if (id->driver_info & BTUSB_INTEL_NEWGEN) {

> -		hdev->manufacturer = 2;

> -		hdev->send = btusb_send_frame_intel;

> -		hdev->setup = btusb_setup_intel_newgen;

> +		hdev->setup = btusb_setup_intel_generic;

>  		hdev->shutdown = btusb_shutdown_intel_new;

>  		hdev->hw_error = btintel_hw_error;

>  		hdev->set_diag = btintel_set_diag;

> @@ -4672,10 +4683,6 @@ static int btusb_probe(struct usb_interface *intf,

>  		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev-

> >quirks);

>  		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev-

> >quirks);

>  		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);

> -

> -		data->recv_event = btusb_recv_event_intel;

> -		data->recv_bulk = btusb_recv_bulk_intel;

> -		set_bit(BTUSB_BOOTLOADER, &data->flags);

>  	}

> 

>  	if (id->driver_info & BTUSB_MARVELL)

> --

> 2.17.1
diff mbox series

Patch

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index e44b6993cf91..b1a4e02c0680 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -58,8 +58,10 @@  int btintel_check_bdaddr(struct hci_dev *hdev)
 	 * address 00:03:19:9E:8B:00 can be found. These controllers are
 	 * fully operational, but have the danger of duplicate addresses
 	 * and that in turn can cause problems with Bluetooth operation.
+	 * Also mark controllers having zero bdaddress
 	 */
-	if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
+	if (!bacmp(&bda->bdaddr, BDADDR_INTEL) ||
+	    !bacmp(&bda->bdaddr, BDADDR_ANY)) {
 		bt_dev_err(hdev, "Found Intel default device address (%pMR)",
 			   &bda->bdaddr);
 		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -483,30 +485,15 @@  int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 }
 EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
 
-int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+static int btintel_parse_version_tlv(struct hci_dev *hdev, struct sk_buff *skb,
+				     struct intel_version_tlv *version)
 {
-	struct sk_buff *skb;
-	const u8 param[1] = { 0xFF };
-
-	if (!version)
-		return -EINVAL;
-
-	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
-	if (IS_ERR(skb)) {
-		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
-			   PTR_ERR(skb));
-		return PTR_ERR(skb);
-	}
+	int err = 0;
 
-	if (skb->data[0]) {
-		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
-			   skb->data[0]);
-		kfree_skb(skb);
-		return -EIO;
-	}
+	memset(version, 0x00, sizeof(*version));
 
 	/* Consume Command Complete Status field */
-	skb_pull(skb, 1);
+	skb_pull(skb, sizeof(__u8));
 
 	/* Event parameters contatin multiple TLVs. Read each of them
 	 * and only keep the required data. Also, it use existing legacy
@@ -516,27 +503,62 @@  int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 	while (skb->len) {
 		struct intel_tlv *tlv;
 
+		if (skb->len < sizeof(*tlv)) {
+			err = -EILSEQ;
+			break;
+		}
+
 		tlv = (struct intel_tlv *)skb->data;
+
+		if (skb->len < (sizeof(*tlv) + tlv->len)) {
+			err = -EILSEQ;
+			break;
+		}
+
 		switch (tlv->type) {
 		case INTEL_TLV_CNVI_TOP:
+			if (tlv->len != sizeof(__le32)) {
+				err = -EILSEQ;
+				break;
+			}
 			version->cnvi_top = get_unaligned_le32(tlv->val);
 			break;
 		case INTEL_TLV_CNVR_TOP:
+			if (tlv->len != sizeof(__le32)) {
+				err = -EILSEQ;
+				break;
+			}
 			version->cnvr_top = get_unaligned_le32(tlv->val);
 			break;
 		case INTEL_TLV_CNVI_BT:
+			if (tlv->len != sizeof(__le32)) {
+				err = -EILSEQ;
+				break;
+			}
 			version->cnvi_bt = get_unaligned_le32(tlv->val);
 			break;
 		case INTEL_TLV_CNVR_BT:
+			if (tlv->len != sizeof(__le32)) {
+				err = -EILSEQ;
+				break;
+			}
 			version->cnvr_bt = get_unaligned_le32(tlv->val);
 			break;
 		case INTEL_TLV_DEV_REV_ID:
+			if (tlv->len != sizeof(__le16)) {
+				err = -EILSEQ;
+				break;
+			}
 			version->dev_rev_id = get_unaligned_le16(tlv->val);
 			break;
 		case INTEL_TLV_IMAGE_TYPE:
 			version->img_type = tlv->val[0];
 			break;
 		case INTEL_TLV_TIME_STAMP:
+			if (tlv->len != sizeof(__le16)) {
+				err = -EILSEQ;
+				break;
+			}
 			/* If image type is Operational firmware (0x03), then
 			 * running FW Calendar Week and Year information can
 			 * be extracted from Timestamp information
@@ -549,6 +571,10 @@  int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 			version->build_type = tlv->val[0];
 			break;
 		case INTEL_TLV_BUILD_NUM:
+			if (tlv->len != sizeof(__le32)) {
+				err = -EILSEQ;
+				break;
+			}
 			/* If image type is Operational firmware (0x03), then
 			 * running FW build number can be extracted from the
 			 * Build information
@@ -569,6 +595,10 @@  int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 			version->debug_lock = tlv->val[0];
 			break;
 		case INTEL_TLV_MIN_FW:
+			if (tlv->len != 3) {
+				err = -EILSEQ;
+				break;
+			}
 			version->min_fw_build_nn = tlv->val[0];
 			version->min_fw_build_cw = tlv->val[1];
 			version->min_fw_build_yy = tlv->val[2];
@@ -580,21 +610,96 @@  int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
 			version->sbe_type = tlv->val[0];
 			break;
 		case INTEL_TLV_OTP_BDADDR:
+			if (tlv->len != sizeof(version->otp_bd_addr)) {
+				err = -EILSEQ;
+				break;
+			}
 			memcpy(&version->otp_bd_addr, tlv->val, tlv->len);
 			break;
 		default:
 			/* Ignore rest of information */
 			break;
 		}
+
+		if (err)
+			break;
+
 		/* consume the current tlv and move to next*/
 		skb_pull(skb, tlv->len + sizeof(*tlv));
 	}
+	return err;
+}
+
+int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
+{
+	int err;
+	struct sk_buff *skb;
+	const u8 param[1] = { 0xFF };
+
+	if (!version)
+		return -EINVAL;
+
+	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->data[0]) {
+		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+			   skb->data[0]);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	err = btintel_parse_version_tlv(hdev, skb, version);
 
 	kfree_skb(skb);
-	return 0;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(btintel_read_version_tlv);
 
+int btintel_generic_read_version(struct hci_dev *hdev,
+				 struct intel_version_tlv *ver_tlv,
+				 struct intel_version *ver, bool *is_tlv)
+{
+	int err = 0;
+	struct sk_buff *skb;
+	const u8 param[1] = { 0xFF };
+
+	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->data[0]) {
+		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+			   skb->data[0]);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	if (skb->len < sizeof(struct intel_version))
+		return -EILSEQ;
+
+	if (skb->len == sizeof(struct intel_version) &&
+	    skb->data[1] == 0x37) {
+		*is_tlv = false;
+		memcpy(ver, skb->data, sizeof(*ver));
+	} else {
+		*is_tlv = true;
+		err = btintel_parse_version_tlv(hdev, skb, ver_tlv);
+	}
+
+	kfree_skb(skb);
+	return err;
+}
+EXPORT_SYMBOL_GPL(btintel_generic_read_version);
+
 /* ------- REGMAP IBT SUPPORT ------- */
 
 #define IBT_REG_MODE_8BIT  0x00
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index d184064a5e7c..366cb746f9c4 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -175,6 +175,10 @@  int btintel_read_debug_features(struct hci_dev *hdev,
 				struct intel_debug_features *features);
 int btintel_set_debug_features(struct hci_dev *hdev,
 			       const struct intel_debug_features *features);
+int btintel_generic_read_version(struct hci_dev *hdev,
+				 struct intel_version_tlv *ver_tlv,
+				 struct intel_version *ver,
+				 bool *is_tlv);
 #else
 
 static inline int btintel_check_bdaddr(struct hci_dev *hdev)
@@ -307,4 +311,10 @@  static inline int btintel_set_debug_features(struct hci_dev *hdev,
 	return -EOPNOTSUPP;
 }
 
+static int btintel_generic_read_version(struct hci_dev *hdev,
+					struct intel_version_tlv *ver_tlv,
+					struct intel_version *ver, bool *is_tlv)
+{
+	return -EOPNOTSUPP;
+}
 #endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a9855a2dd561..6c5050bdcfcc 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -60,7 +60,6 @@  static struct usb_driver btusb_driver;
 #define BTUSB_WIDEBAND_SPEECH	0x400000
 #define BTUSB_VALID_LE_STATES   0x800000
 #define BTUSB_QCA_WCN6855	0x1000000
-#define BTUSB_INTEL_NEWGEN	0x2000000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -368,9 +367,9 @@  static const struct usb_device_id blacklist_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH },
-	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEWGEN |
+	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH},
-	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEWGEN |
+	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH},
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
@@ -2521,8 +2520,8 @@  static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 		return -EINVAL;
 
 	/* The firmware variant determines if the device is in bootloader
-	 * mode or is running operational firmware. The value 0x03 identifies
-	 * the bootloader and the value 0x23 identifies the operational
+	 * mode or is running operational firmware. The value 0x23 identifies
+	 * the bootloader and the value 0x03 identifies the operational
 	 * firmware.
 	 *
 	 * When the operational firmware is already present, then only
@@ -2536,14 +2535,14 @@  static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	if (ver->img_type == 0x03) {
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
 		btintel_check_bdaddr(hdev);
-	}
-
-	/* If the OTP has no valid Bluetooth device address, then there will
-	 * also be no valid address for the operational firmware.
-	 */
-	if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
-		bt_dev_info(hdev, "No device address configured");
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	} else {
+		/* In Boot mode, bd address is part of tlv data. Check for
+		 * valid bd address
+		 */
+		if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
+			bt_dev_info(hdev, "No device address configured");
+			set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+		}
 	}
 
 	btusb_setup_intel_newgen_get_fw_name(ver, fwname, sizeof(fwname), "sfi");
@@ -2842,10 +2841,9 @@  static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
 	return err;
 }
 
-static int btusb_setup_intel_new(struct hci_dev *hdev)
+static int btusb_setup_intel_new(struct hci_dev *hdev, struct intel_version *ver)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
-	struct intel_version ver;
 	struct intel_boot_params params;
 	u32 boot_param;
 	char ddcname[64];
@@ -2860,27 +2858,16 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 */
 	boot_param = 0x00000000;
 
-	/* Read the Intel version information to determine if the device
-	 * is in bootloader mode or if it already has operational firmware
-	 * loaded.
-	 */
-	err = btintel_read_version(hdev, &ver);
-	if (err) {
-		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
-		btintel_reset_to_bootloader(hdev);
-		return err;
-	}
-
-	err = btintel_version_info(hdev, &ver);
+	err = btintel_version_info(hdev, ver);
 	if (err)
 		return err;
 
-	err = btusb_intel_download_firmware(hdev, &ver, &params, &boot_param);
+	err = btusb_intel_download_firmware(hdev, ver, &params, &boot_param);
 	if (err)
 		return err;
 
 	/* controller is already having an operational firmware */
-	if (ver.fw_variant == 0x23)
+	if (ver->fw_variant == 0x23)
 		goto finish;
 
 	err = btusb_intel_boot(hdev, boot_param);
@@ -2889,7 +2876,7 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);
 
-	err = btusb_setup_intel_new_get_fw_name(&ver, &params, ddcname,
+	err = btusb_setup_intel_new_get_fw_name(ver, &params, ddcname,
 						sizeof(ddcname), "ddc");
 
 	if (err < 0) {
@@ -2913,17 +2900,17 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	btintel_set_debug_features(hdev, &features);
 
 	/* Read the Intel version information after loading the FW  */
-	err = btintel_read_version(hdev, &ver);
+	err = btintel_read_version(hdev, ver);
 	if (err)
 		return err;
 
-	btintel_version_info(hdev, &ver);
+	btintel_version_info(hdev, ver);
 
 finish:
 	/* All Intel controllers that support the Microsoft vendor
 	 * extension are using 0xFC1E for VsMsftOpCode.
 	 */
-	switch (ver.hw_variant) {
+	switch (ver->hw_variant) {
 	case 0x11:	/* JfP */
 	case 0x12:	/* ThP */
 	case 0x13:	/* HrP */
@@ -2944,14 +2931,13 @@  static int btusb_setup_intel_new(struct hci_dev *hdev)
 	return 0;
 }
 
-static int btusb_setup_intel_newgen(struct hci_dev *hdev)
+static int btusb_setup_intel_newgen(struct hci_dev *hdev, struct intel_version_tlv *version)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 boot_param;
 	char ddcname[64];
 	int err;
 	struct intel_debug_features features;
-	struct intel_version_tlv version;
 
 	bt_dev_dbg(hdev, "");
 
@@ -2961,27 +2947,16 @@  static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	 */
 	boot_param = 0x00000000;
 
-	/* Read the Intel version information to determine if the device
-	 * is in bootloader mode or if it already has operational firmware
-	 * loaded.
-	 */
-	err = btintel_read_version_tlv(hdev, &version);
-	if (err) {
-		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
-		btintel_reset_to_bootloader(hdev);
-		return err;
-	}
-
-	err = btintel_version_info_tlv(hdev, &version);
+	err = btintel_version_info_tlv(hdev, version);
 	if (err)
 		return err;
 
-	err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param);
+	err = btusb_intel_download_firmware_newgen(hdev, version, &boot_param);
 	if (err)
 		return err;
 
 	/* check if controller is already having an operational firmware */
-	if (version.img_type == 0x03)
+	if (version->img_type == 0x03)
 		goto finish;
 
 	err = btusb_intel_boot(hdev, boot_param);
@@ -2990,7 +2965,7 @@  static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 
 	clear_bit(BTUSB_BOOTLOADER, &data->flags);
 
-	btusb_setup_intel_newgen_get_fw_name(&version, ddcname, sizeof(ddcname),
+	btusb_setup_intel_newgen_get_fw_name(version, ddcname, sizeof(ddcname),
 					     "ddc");
 	/* Once the device is running in operational mode, it needs to
 	 * apply the device configuration (DDC) parameters.
@@ -3009,11 +2984,11 @@  static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 	btintel_set_debug_features(hdev, &features);
 
 	/* Read the Intel version information after loading the FW  */
-	err = btintel_read_version_tlv(hdev, &version);
+	err = btintel_read_version_tlv(hdev, version);
 	if (err)
 		return err;
 
-	btintel_version_info_tlv(hdev, &version);
+	btintel_version_info_tlv(hdev, version);
 
 finish:
 	/* Set the event mask for Intel specific vendor events. This enables
@@ -3027,6 +3002,56 @@  static int btusb_setup_intel_newgen(struct hci_dev *hdev)
 
 	return 0;
 }
+
+static bool btintel_is_newgen_controller(struct hci_dev *hdev, u32 cnvi)
+{
+	bt_dev_dbg(hdev, "CNVi - %x", cnvi & 0xFFF);
+
+	switch (cnvi & 0xFFF) {
+	case 0x400: /* Slr */
+	case 0x401: /* Slr-F */
+	case 0x410: /* TyP */
+		return true;
+	}
+	return false;
+}
+
+static int btusb_setup_intel_generic(struct hci_dev *hdev)
+{
+	struct intel_version_tlv ver_tlv;
+	struct intel_version ver;
+	bool is_tlv;
+	int err;
+
+	err = btintel_generic_read_version(hdev, &ver_tlv, &ver, &is_tlv);
+	if (err) {
+		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		goto done;
+	}
+
+	if (!is_tlv) {
+		err = btusb_setup_intel_new(hdev, &ver);
+	} else {
+		/* In OP mode Quasar/Pulsar ram products returns TLV data.
+		 * Find out CNVi and then  branch out appropriately
+		 */
+		if (btintel_is_newgen_controller(hdev, ver_tlv.cnvi_top)) {
+			err = btusb_setup_intel_newgen(hdev, &ver_tlv);
+		} else {
+			err = btintel_read_version(hdev, &ver);
+			if (err) {
+				bt_dev_err(hdev, "Intel Read version failed (%d)", err);
+				goto done;
+			}
+			err = btusb_setup_intel_new(hdev, &ver);
+		}
+	}
+done:
+
+	return err;
+}
+
 static int btusb_shutdown_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -4649,21 +4674,7 @@  static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_INTEL_NEW) {
 		hdev->manufacturer = 2;
 		hdev->send = btusb_send_frame_intel;
-		hdev->setup = btusb_setup_intel_new;
-		hdev->shutdown = btusb_shutdown_intel_new;
-		hdev->hw_error = btintel_hw_error;
-		hdev->set_diag = btintel_set_diag;
-		hdev->set_bdaddr = btintel_set_bdaddr;
-		hdev->cmd_timeout = btusb_intel_cmd_timeout;
-		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
-		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
-		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
-	}
-
-	if (id->driver_info & BTUSB_INTEL_NEWGEN) {
-		hdev->manufacturer = 2;
-		hdev->send = btusb_send_frame_intel;
-		hdev->setup = btusb_setup_intel_newgen;
+		hdev->setup = btusb_setup_intel_generic;
 		hdev->shutdown = btusb_shutdown_intel_new;
 		hdev->hw_error = btintel_hw_error;
 		hdev->set_diag = btintel_set_diag;
@@ -4672,10 +4683,6 @@  static int btusb_probe(struct usb_interface *intf,
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
-
-		data->recv_event = btusb_recv_event_intel;
-		data->recv_bulk = btusb_recv_bulk_intel;
-		set_bit(BTUSB_BOOTLOADER, &data->flags);
 	}
 
 	if (id->driver_info & BTUSB_MARVELL)